Model:947-I
Power supply voltage:110V 60HZ/220V 50HZ
Power : ≤35W/45W/60W
Working temperature :0-40℃
Welding head ground resistance :<2Ω
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel. While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. Energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
₨1,450 ₨1,679
Model:947-I
Power supply voltage:110V 60HZ/220V 50HZ
Power : ≤35W/45W/60W
Working temperature :0-40℃
Welding head ground resistance :<2Ω
Weight | 0.2 kg |
---|---|
Dimensions | 27 × 7 × 7 cm |
Machine parameter | ||
Rated voltage | AC 220V±10% 50Hz | |
Total Power | 730W±10%(max) | |
300℃ Constant Temperature Power
(High-Speed PID Programmed to Energy Savings) |
250W±10% | |
Operating Environment | 0~40℃ Relative humidity<80% | |
Storage temperature | -20~80℃ Relative humidity<80% | |
Dimensions | 31.5*22*22cm | |
weight | 3.5KG | |
Performance Parameter | Hot air gun | Soldering iron |
Operating Voltage | AC 220V±10% 50Hz | AC 26V±10% 50Hz |
Output power | 650W | 75W |
temperature range | 100℃~480℃ | 200℃~480℃ |
Air Supply Mode | Brushless-Motor Fan | — |
airflow | 120L/min(max) | — |
Temperature stability | ±2℃ (static) | ±2℃ (static) |
Display Mode | Red LED Digital Display | Red LED Digital Display |
Calibration Mode | PID Digitally
Programmed Calibration |
PID Digitally
Programmed Calibration |
Temperature correction | PID digital program
proofreading |
PID digital program
proofreading |
Specifications | |
Model | UT691-10 |
Laser output power | ≥10mW |
Optical fiber length range | 8~10km |
Wavelength of redight | 650±10nm |
Optical fiber adapter | 2.5mm FC general connector |
Battery type | 3.7V 1050mAh polymer lithium battery |
Battery life | >7h |
Battery status display | The battery status will be shown by 4 blue LED (not in flashlight) |
Green indicator | Indicates auto power off state which LED will flash white light for 3 times |
Laser mode | Continuous mode/Pulse mode |
Charge voltage and current | DC 5V, < 1A |
APO | 15min auto power off (manual adjustable) |
Warning symbol | √ |
Warning | √ |
Key press test | >5000 times |
Drop test | 1m |
General Characteristics | |
Power | 1050mAh rechargeable battery |
Product color | Red and grey |
Product net weight | 62g |
Product size | 130mm x 38mm x 27mm |
Standard individual packing | Gift box, English manual |
Standard quantity per carton | 20pcs |
Standard carton measurement | 285mm x 245mm x 155mm |
Standard carton gross weight | About 2.8kg |
MODEL | 938BD+ |
Power consumption | 135W |
Temperature Range | 100°C~480°C/212°F~896°F |
Display type | LCD |
Temperature stability | ±2°C/3.6°F (static) |
Heater voltage | AC 24V ±10% 50Hz |
Sleep Function | 0-99 Minutes |
Temperature Compensation Programmable | -50 °C to +50 °C |
Working Environment | 0~40°C/32°F~104°F |
Storage Environment | -20°C ~ 80°C/-4°F ~ 176°F |
Soldering Iron & Hot Tweezers Cord Material | 100% Silicone (Virtually No Memory) |
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.
Specifications | Range | UT133A |
DC voltage (V) | 600mV/6000mV/60V/600V | ±(0.5%+3) |
AC voltage (V) | 600V | ±(0.7%+3) |
DC current (A) | 600uA/60mA/600mA/10A | ±(1%+3) |
AC current (A) | 10A | ±(1.2%+3) |
Resistance (Ω) | 600Ω/6000Ω/60kΩ/600kΩ/60MΩ | ±(0.8%+2) |
Capacitance (F) | 9.999nF/99.99nF/999.9nF/9.999μF/99.99μF/999.9μF/9.999mF | ±(4%+5) |
Frequency (Hz) | 10.00Hz~1.000MHz | ±(0.1%+5) |
Temperature (℃) | ‒40℃~1000℃ | ±(1%+4) |
Temperature (℉) | ‒40℉~1832℉ | ±(1.5%+5) |
Features | ||
Display count | 6000 | |
Range selection | Auto | |
Diode | √ | |
Continuity buzzer | √ | |
NCV | √ | |
LCD backlight | √ | |
Test probe holder | √ | |
Data hold | √ | |
Low battery indication | √ | |
Overload indication | √ | |
General Characteristics | ||
Power | 1.5V battery (R03) x 2 | |
Display | 56.8mm x 36.1mm | |
Product color | Red and grey | |
Product net weight | 255g (with batteries) | |
Product size | 155mm x 76.5mm x 49mm | |
Standard accessories | Manual, test leads, K-type thermocouple | |
There are no reviews yet.