Model:947-I
Power supply voltage:110V 60HZ/220V 50HZ
Power : ≤35W/45W/60W
Working temperature :0-40℃
Welding head ground resistance :<2Ω
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel. While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. Energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
₨1,450 ₨1,679
Model:947-I
Power supply voltage:110V 60HZ/220V 50HZ
Power : ≤35W/45W/60W
Working temperature :0-40℃
Welding head ground resistance :<2Ω
Weight | 0.2 kg |
---|---|
Dimensions | 27 × 7 × 7 cm |
MODEL | 939D+ |
RATED VOLTAGE | AC 220V±10% 50Hz |
OUTPUT POWER | 75W |
Constant Temperature Power (High-Speed PID Programmed to Energy Savings) | 200W±10% |
Withstand voltage and insulation tests | AC1500V 0.4A 60S |
Operating Environment | 0~40℃ relative humidity<80% |
Storage environment | -20~80℃ relative humidity<80% |
Body size | 14.5*12*8CM |
Weight | 2.17KG |
Work voltage | AC 26V±10% 50Hz |
Temperature range | 200℃~480℃ |
Temperature Stability | ±1℃(Static) |
Display Mode | LED Digital Display |
Calibration Mode | PID Digitally Programmed Calibration |
PID Temperature Calibration Cycle | 100MS |
Heating Core | Imported High-Powered Heating Core |
Tip-to-Ground Impedance | <2Ω |
Tip-to-Ground Voltage | <2mV |
Machine parameter | |||
Rated voltage | AC 220V±10% 50Hz | ||
Machine power | 700W±10%(MAX) | ||
working environment | 0~40℃ relative humidity <80% | ||
Storage temperature | -20~80℃ relative humidity <80% | ||
Machine size | 25.5*18.8*12.5cm | ||
weight | 3.55KG | ||
Part of performance parameters | Hot air gun | Soldering iron | |
Working voltage | AC 220V±10% 50Hz | AC 26V±10% 50Hz | |
Output power | 650W | 60W | |
temperature range | 100℃~500℃ | 200℃~500℃ | |
Mode of airflow | brushless fan | — | |
airflow | 120L/min(max) | — | |
Temperature stability | ±15℃ (static) | ±10℃ (static) | |
Display | two LED (red/green) | — | |
heater | Heating core ceramics heater | common heater | |
Tips to ground impedance | — | <2Ω | |
Tips voltage to ground | — | <2mV |
Specifications | Range | UT659D |
Certifications | CE/RoHS | |
Output voltage | 24V | √ |
300V | √ | |
Output current | 2mA | √ |
30mA | √ | |
Continuity | Output voltage: 5V (DC) | |
Measuring resistance: 0~99.9Ω | ||
Input range | 85V to 265V @ 50/60Hz | |
Backlight function | constant on | |
Safety protection | High-impedance open circuit | |
Operating temperature | 0°C~40°C | |
Storage temperature | -10°C~50°C | |
Relative humidity | <80% RH | |
Operating altitude | ≤2000m | |
Drop protection | 1m | |
Category ratings | CAT II 300V | |
General Characterisitics | ||
Power | AC 85V~260V, 50Hz/60Hz | |
Display | 60mm x 35mm | |
Product net weight | 175g | |
Product size | 150mm x 56mm x 42mm | |
Standard accessories | Power cable, test leads, English manual | |
Standard individual packing | Gift box, blister | |
Standard quantity per carton | 20pcs | |
Standard carton measurement | 345mm x 335mm x 245mm | |
Standard carton gross weight | 7.7kg |
Specifications | |
Model | UPO2104E |
Bandwidth | 100MHz |
Channels | 4 |
Sampling rate | 1GS/s |
Memory depth | 56Mpts (single channel) |
Waveform capture rate | 83,000wfms/s |
Time base scale (s/div) | 5ns/div~50s/div |
Input impedance | (1MΩ±2%) II (20pF±3pF) |
Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) |
Waveform record | 65,000 Frames |
Trigger types | Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code |
Waveform operations | A+B, A-B, A×B, A/B, FFT, logic operation, advanced |
Auto measurements | Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). |
Number of measurements | Display 5 measurements at the same time |
Measurement statistics | Average, Max, Min, Standard Deviation, Number of Measurements |
Frequency counter | Hardware 6 bits counter (Channels are selectable) |
Standard interfaces | USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) |
General Characteristics | |
Power | 100V~240VAC, 50Hz/60Hz |
Display | 8 inches TFT color LCD Display with WVGA (800×480) resolution |
Product color | White and grey |
Product net weight | 3.5kg |
Product size | 336mm×164mm×108mm |
Standard accessories | Probe×2/4 (1×, 10× switchable), Power cord, USB cable |
Standard individual packing | Carton box |
Standard quantity per carton | 2pcs |
Standard carton measurement | 450mm×420mm×280mm |
Standard carton gross weight | 9.7kg |
Features of UT 338A Formaldehyde Gas Detector
1. With PID programmable temperature control technology and the highest precision PID input program, temperature is both adjustable and stable while deviations are minimized.
2. The heated aluminum is smooth and flat, ensuring a uniform surface temperature.
3. This device has the following user-friendly design features:A. Celsius/Fahrenheit temperature display;B. Temperature correction feature.
4. The double-sided internal SMT manufacturing process boasts clean craftsmanship. The signal flow is clear, and the machine is both stable and safe, further improving its performance and adaptability to various harsh environments.
There are no reviews yet.