YH 947-II Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
₨1,500 ₨1,974
Model:947-II
Power supply voltage:110V 60HZ/220V 50HZ
Power:≤60W
Temperature range:220-480℃
Temperature stability :±1℃（static state)
| Weight | 0.2 kg |
|---|---|
| Dimensions | 27 × 7 × 7 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 947-II Soldering Iron”
-
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Rework & Soldering Station
YH 852 (BRUSHLESS FAN) Rework Station
Machine parameter Rated voltage AC 220V±10% 50Hz Machine power 700W±10％（MAX） working environment 0～40℃ relative humidity ＜80％ Storage temperature －20～80℃ relative humidity ＜80％ Machine size 25.5*18.8*12.5cm weight 3.55KG Part of performance parameters Hot air gun Soldering iron Working voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 60W temperature range 100℃～500℃ 200℃～500℃ Mode of airflow brushless fan — airflow 120L/min(max) — Temperature stability ±15℃ （static） ±10℃ （static） Display two LED (red/green) — heater Heating core ceramics heater common heater Tips to ground impedance — ＜2Ω Tips voltage to ground — ＜2mV SKU: n/a -
Multimeters
UT 133A Digital Multimeter
Specifications Range UT133A DC voltage (V) 600mV/6000mV/60V/600V ±(0.5%＋3) AC voltage (V) 600V ±(0.7%+3) DC current (A) 600uA/60mA/600mA/10A ±(1%+3) AC current (A) 10A ±(1.2%+3) Resistance (Ω) 600Ω/6000Ω/60kΩ/600kΩ/60MΩ ±(0.8%+2) Capacitance (F) 9.999nF/99.99nF/999.9nF/9.999μF/99.99μF/999.9μF/9.999mF ±(4%+5) Frequency (Hz) 10.00Hz~1.000MHz ±(0.1%+5) Temperature (℃) ‒40℃~1000℃ ±(1%+4) Temperature (℉) ‒40℉~1832℉ ±(1.5%+5) Features Display count 6000 Range selection Auto Diode √ Continuity buzzer √ NCV √ LCD backlight √ Test probe holder √ Data hold √ Low battery indication √ Overload indication √ General Characteristics Power 1.5V battery (R03) x 2 Display 56.8mm x 36.1mm Product color Red and grey Product net weight 255g (with batteries) Product size 155mm x 76.5mm x 49mm Standard accessories Manual, test leads, K-type thermocouple SKU: n/a -
Thermal Imagers
UTi 120T Thermal Imager
Advantages of thermal imager detection:
1. Intuitive, efficient and convenient, making users directly “see” the temperature variation.
2. Thermal condition of different locations for comprehensive analysis, providing more information for judgment
3. Avoiding judgment errors, reducing labor costs, and discovering poor heat dissipation and hidden trouble points
4. PC software for data analysis and report output
SKU: n/a -
-
Related products
-
Tools and Hardware
JM OP06 OPENING TOOL
DescriptionItem Description:- Features:
– Stainless steel material make it more durable.
– Anti-corrosion with stainless steel forged process.
– Easier to disassemble the electronic part accessories.
– Common used in laptops, mobiles and tablets disassembling.
– Special rolling-wheel design for better use in opening.
– The end of the tool with anti-slip design make it easier for disassembling.
– Precision processing technology on the metal part for better protection on the product itself. - Brand: JAKEMY
- Model: JM-OP06
- Material: Stainless steel
- Color: Orange & silver
- Package Weight: 45.0 G / 1.59 Ounces
- Package Dimensions (L*W*H): 180*80*13 MM / 7.09*3.15*0.51 Inches200
SKU: n/a - Features:
There are no reviews yet.