YH 992D A+ 3 IN 1 REWORK STATION
| parameters | |||
| Rated voltage | AC 220V±10% 50Hz | ||
| power | 720W±10％（Max） | ||
| 300℃ Constant Temperature Power (High-Speed PID Programmed to Energy Savings) | 250W±10％ | ||
| Working environment | 0～40℃ relative humidity＜80％ | ||
| Storage environment | －20～80℃ relative humidity＜80％ | ||
| Dimensions | 255*188*125mm | ||
| Weight | 5.11KG | ||
| Parts parameters | Hot air gun | Soldering iron | |
| Operating Voltage | AC 220V±10% 50Hz | AC 26V±10% 50Hz | |
| Output power | 550W | 75W | |
| Temperature range | 100℃～480℃ | 200℃～480℃ | |
| Air Supply Mode | Diaphragm pump | — | |
| Air Flow | 28L/min(MAX) | — | |
| Temperature Stability | ±1℃ （Static） | ±1℃ （Static） | |
| Display Mode | LCD display | LCD display | |
| Calibration Mode | The PID digital program
proofreading |
The PID digital program
proofreading |
|
| PID Temperature Calibration Cycle | rapidly 20ms | high-speed 100ms | |
| Heating Core | Ceramic columned heating element. | Imported heater | |
| Standard nozzles/tips | (3mm,5mm,8mm,10mm,13mm)
5PCS nozzles |
B | |
| Tip ground impedance | — | ＜2Ω | |
| Tip of ground voltage | — | ＜2mV | |
₨37,560 ₨40,802
1.The air gun/soldering iron features -50ºC to +50ºC temperature compensation
2.The air gun/soldering iron features ºF/ºC conversion
3.The air gun features manual/automatic work mode conversion4.The soldering iron features a sleep function that can be set from 0-99 minutes.YIHUA992DA+ upgrade version have all above YIHUA992DA basic function, also additional below function :A)Three section temperature storage mode (able to store hot air gun temperature, soldering iron temperature, air volume, temperature correction, automatic hibernation, automatic and manual mode, etc. These three sections can be switched freely).B)Cold air function added, able to switch between hot air and cold air.
| Weight | 5.11 kg |
|---|---|
| Dimensions | 25 × 19 × 12 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 992D A+ 3 IN 1 REWORK STATION”
-
Tools and Hardware
JM X4 Magnetic Watch
Wristband design, easy and comfortable to use, doesn’t affect any movement.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Put components on the wristband anytime you want, prevent components from missing.
Strong magentic board is made of permanent magnet, strong magnetism, long service life and efficient adsorption.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Hook and loop strap design, easy and comfortable to wear.SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-II Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a -
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
SKU: n/a -
Rework & Soldering Station
YH 938BD+ DUAL SMD STATION
MODEL 938BD+ Power consumption 135W Temperature Range 100°C~480°C/212°F~896°F Display type LCD Temperature stability ±2°C/3.6°F (static) Heater voltage AC 24V ±10% 50Hz Sleep Function 0-99 Minutes Temperature Compensation Programmable -50 °C to +50 °C Working Environment 0~40°C/32°F~104°F Storage Environment -20°C ~ 80°C/-4°F ~ 176°F Soldering Iron & Hot Tweezers Cord Material 100% Silicone (Virtually No Memory) SKU: n/a -
Meter Leads
UT L28 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- Double insulated wire.
- Removable tip shield sleeve.
- Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
● Tip length: 16.8mm● Safety level: CAT III 1000V/CAT IV 600V 10A● Safety certificate: EN 61010-031 A1:2015● Features and application: Double insulated wire, removable
SKU: n/a -
Wire Tracker
UT 683KIT Wire Tracer
Description Certificates CE, RoHS Transmitter Port flashing √ Wire tracking √ Line alignment √ Open-short test 10kΩ Polarity test √ Operating time ＞8 hours Receiver Wire tracking RJ11＞3000m; RJ45＞100m NCV function √ Headset jack 3.5mm Low battery indication √ Operating time ＞5 hours GENERAL CHARACTERISTICS Power 1050mAh rechargeable lithium battery Product net weight Transmitter: around 95g; Receiver: around 127g Product size Transmitter-130mm x 51mm x 28mm; Receiver-197mm x 48mm x 34mm Standard accessories USB cable, RJ11 aligator clip test cable, RJ45 test cable, RJ11 test cable, English manual Standard individual packing Gift box, carrying bag Standard quantity per carton 20pcs Standard carton measurement 480mm x 370mm x 325mm Standard carton gross weight About 10kg SKU: n/a
Related products
-
Rework & Soldering Station
YH 853D 5A-II ALL IN 1 REWORK STATION
A multi-station that fully integrates 3 professional stations that satisfy a broad range of soldering, reworking, and testing applications. Professional all-round performance and user experience for flexible applications. Advanced technologies, including precision temperature stabilization, temperature calibration, sleep mode, zero-airflow protection, automatic shut-down, and more
SKU: n/a -
Rework & Soldering Station
YH 898BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W 300℃ Constant Temperature Power (High-Speed PID Programmed to
Energy Savings)
250W±10％ Operating Environment 0～40℃ Relative humidity＜80％ Storage temperature －20～80℃ Relative humidity＜80％ Dimensions 13.5*15*10cm weight 2.65KG SKU: n/a -
Rework & Soldering Station
YH 852 (BRUSHLESS FAN) Rework Station
Machine parameter Rated voltage AC 220V±10% 50Hz Machine power 700W±10％（MAX） working environment 0～40℃ relative humidity ＜80％ Storage temperature －20～80℃ relative humidity ＜80％ Machine size 25.5*18.8*12.5cm weight 3.55KG Part of performance parameters Hot air gun Soldering iron Working voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 60W temperature range 100℃～500℃ 200℃～500℃ Mode of airflow brushless fan — airflow 120L/min(max) — Temperature stability ±15℃ （static） ±10℃ （static） Display two LED (red/green) — heater Heating core ceramics heater common heater Tips to ground impedance — ＜2Ω Tips voltage to ground — ＜2mV SKU: n/a
There are no reviews yet.