- Model: YH-3010D
- Compact Design
- All Metal Construction
- Dual LED Display
- High Stabilized Output Voltage
- Short Circuit Protection
- Over Loading and Current Protection
This model has compact design with all metal construction.
1.This unit now features a Dual LED display with highly accurate LED digital readout.
2.Maximum output is 30V at 10A.
5.Over loading and current protection.
₨22,500 ₨25,008
Weight | 2.5 kg |
---|---|
Dimensions | 15 × 15 × 10 cm |
Operating Conditions:
Supply power: AC 220-240V, 50Hz/60Hz.
Working Temperature: -10°C ~ 40 °C
Relative Humidity: ‹ 90%
Storage Conditions: -10°C ~ 40 °C
Relative Humidity: ‹ 80%
Stable Voltage
The output voltage is between 0 and nominal value continuously adjustable
Voltage Stability: ≤0.01% +2mV
Load Stability: ≤ 0.01% +2mV
Recovery Time: ≤100µS
Ripple Noise: ≤1 MVRMS(RMS)
Temperature Coefficient: ≤ 200PPM/°C
Stable Current
The output current is between 0 and nominal value continuously adjustable
Power Stability: 0.1% + 3mA
Load Stability: 0.2% + 3mA
Ripple Noise : ≤2mArms(RMS)
Specifications | UT622A | UT622C | UT622E |
Certificates | CE, RoHS | ||
Test frequency | 100Hz, 120Hz, 1kHz, 10kHz | 100Hz, 120Hz, 1kHz, 10kHz, 100kHz | 100Hz, 120Hz, 1kHz, 10kHz, 100kHz |
Test signal level | 0.1Vrms, 0.3Vrms, 1Vrms | ||
Output impedance | 100Ω | ||
Measurement parameters | Primary: L/C/R/Z Secondary: D/Q/θ/ESR |
Primary: L/C/R/Z/DCR Secondary: D/Q/θ/ESR | |
Auto LCR | √ | ||
Test terminals | Three-terminal test jacks, five-terminal test sockets | ||
Test rate | Fast (20 times/s), medium (5 times/s), or slow (2 times/s) | ||
DCR test rate | — | — | Fast (20 times/s), medium (5 times/s), or slow (2 times/s) |
Ranging mode | Auto/hold | ||
Tolerance range | 1%~20% | ||
Testing circuit mode | Series/parallel mode | ||
Clearing correction | Open/short circuit | ||
Fuse of test ports | 0.1A/250V | ||
Communication interface | Mini-USB | ||
LED alarm for tolerance (pass: green; fail: red) |
√ | √ | √ |
Display range | |||
Maximum reading | 99999 | ||
Minimum resolution | 0.0001 | ||
Maximum accuracy | 0.001 | ||
L | 0.00μH~99.999H | ||
C | 0.00pF~99.999mF | ||
Z/R | 0.0000Ω~9.9999MΩ | ||
ESR | 0.0000Ω~999.99Ω | ||
D | 0.0000~9.9999 | ||
Q | 0.0000~99999 | ||
θ | -179.9°~179.9° | ||
DCR | — | — | 0.01mΩ–20.000MΩ |
Temperature coefficient | 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) | ||
General Characteristics | |||
Power | 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A | ||
Display | 2.8′ TFT LCD 320X240 | ||
Product net weight | 420g | ||
Product size | 93mm x 192mm x 44mm | ||
Standard accessories | Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual |
BM528F AC Digital Clamp meter Technical parameters
|
||
Functions
|
Range
|
Accuracy
(BM528F)
|
DC Voltage
|
200mV/2V/20V/200V/1000V
|
±(0.8%+2)
|
AC Voltage
|
2V/20V/200V/700V
|
±(1.2%+5)
|
AC Current
|
2A/20A/200A/600A
|
±(2%+10)
|
Ω Resistance
|
200/2K/20K/200K/2M/20MΩ
|
±(1%+3)
|
Capacitance
|
20n/200n/2μ/20μ/200μ/2mF
|
±(3%+5)
|
Frequency
|
200/2K/20K/200K/2M/20MHz
|
±(0.5%+3)
|
℃ / ℉
|
-50℃ ~1000℃
-58℉~1832℉ |
±(1%+5)
±(1.2%+6)
|
UT132 Series is a 3.5 digit palm sized digital multimeter with stable performance, and fashionable design. UT132 are safe and reliable manual ranged multimeters that can be used for measuring AC/DC voltage, resistance, capacitance, temperature, diode voltage drop, transistor hFE parameter, circuit continuity, square wave output and so on. Its adapter plug socket can conveniently test surface mount devices. UT132 can be used for home, schools, factories, electrical and chemical engineering, and other areas. It is a great tool for circuit maintenance and electrical equipment repair.
There are no reviews yet.