-28%

YIHUA 303D DC Power Supply


Feature

303D communication maintenance power supply is a single line output of stabilized high accuracy

DC stabilized power supply. The output voltage and current can be adjusted continuously within the

 rated range. The load current has MA conversion with two settings: 0-3A and 0-99 mA. Constant

voltage and constant current (CV/CC), automatic switching of working modes. Double digital display

shows output voltage and current independently. Several protection functions include current

 limitation, voltage reduction, short circuit protection, over-temperature protection, etc. The design

 is applied to production line of the plant, maintenance, laboratories and is also a necessary device

for the communication industry.

7,586 10,529

Compare

Principle description of constant voltage/constant current CV/CC

The operation mode of constant voltage/constant current can be automatically switched depending

on the comparison result of the load current and limited current value.

  1. a) Constant voltage CV

When the existing current value is smaller than the set output limit current value, the power supply

 is working under the constant voltage mode. The CV indicator light on the front panel is on, the

output voltage is controlled and it will be the same as the set value. Current changes with the load.

  1. b) Constant current mode (CC)

When the current value exceeds the limit value of the output current, the equipment will work in

the CC mode. The CC indicator light on the front panel is on, the output current value is controlled

 to the set value. Since the limited output power cannot be overloaded, the output voltage can be

lower than the set value. When the output current is lower than the set value, the equipment will

automatically change to CC mode.

Category:
Weight 4 kg
Dimensions 25 × 13 × 15 cm

Machine parameters

Parameters
rated voltage AC220V  50Hz
Power of complete machine 140W
Operating environment 0~40℃  relative humidity <80%
Storage Temperature -20~80℃  relative humidity <80%
Dimensions of the machine body 255*130*150mm
weight 4.3KG
Performance parameters
output voltage Adjustable continuously within 0~30V
output current Adjustable continuously within 0~3A/0-99mA

(current limitation adjustment when above 0.2A)

output power 90W
Source effect 1mV
load effect ≤0.33%
Ripple noise ≤3mVrms(5Hz ~ 1MHz)/≤3mArms
Display accuracy 0.1V/0.1A/1mA
Protection mode Over current, short circuit, over temperature protection
Dissipation mode air cooling

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YIHUA 303D DC Power Supply”

There are no reviews yet.

  • SVC 7000VA

    0 out of 5
    (0)

    Input=120V 270
    Output=220
    Under and Over Volt Protection
    Surge Protection
    Over Load and Heat Protection
    Copper Wind with LCD Display

    SKU: n/a
  • UNI-T UTG4162A Function/Arbitrary Waveform Generator

    0 out of 5
    (0)
    bandwidth 160MHz
    Channels 2
    Sampling rate 500MS/s
    Waveforms Sine, square, ramp, harmonic, pulse, noise, DC voltage, arbitrary
    Working modes Output on/off, continuous, modulation, sweep, burst
    Modulations AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM
    Frequency Characteristics
    Sine 1μHz~160MHz
    Square/Pulse 1μHz~50MHz
    Slope 1μHz~4MHz
    Harmonic 1μHz~80MHz
    Noise (-3dB) 160MHz bandwidth
    Resolution 1μHz
    Arbitrary Waveform
    Frequency range 1μHz~40MHz
    Length 8~32Mpts
    Vertical resolution 16 bits
    Min rise/fall time (typical: 1Vpp) <5ns
    General Characteristics
    Power 100V~240V ACrms, 50Hz/60Hz
    Display 8-inch TFT LCD, WVGA (800 x 480)
    Product color White and grey
    Product net weight 3.5kg
    Product size 336mm x 164mm x 108mm
    Standard accessories BNC-BNC cable x 2, USB interface cable, PC software CD, power cord
    Standard individual packing Carton box
    Standard quantity per carton 1pcs
    Standard carton measurement 405mm x 225mm x 265mmv
    SKU: n/a
  • Insulation Resistance Testers UT511

    0 out of 5
    (0)

    UT510 series is a kind of intelligent insulation tester. The device circuit design takes microcomputer technology design as the core and combines the large scale integrated circuit with digit circuit. It is equipped with strong measuring software and data processing software. It is applied to the parameter measurement of insulation resistance, voltage and low resistance. It has stable performance and simple operation. It is applicable to on-site measurement and repair of the electrical equipment and charging line. It is the ideal tool of maintaining electrical equipment. It is also used for smelting, communication, manufacture, fossil oil, national defense, electricity, chemical industry and circuit.

    SKU: n/a
  • UTD2052CL Digital Storage Oscilloscope

    0 out of 5
    (0)

    1. Dual analog channels width range 1mV/div~20V/div;
    2. 7 inches widescreen LCD displays;
    3. Special Print Scree Feature;
    4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
    5. USB drive system software upgrade;
    6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
    7. Automatic measurement of 28 waveform parameters;
    8. Unique waveform recording and replay function;
    9. Multilingual menu displays.

    SKU: n/a