YIHUA 9936 Portable Soldering Station
Out of stock
Standard accessory
Main unit 1set
Soldering iron handle (include iron tips and heater) 1pc
Iron holder 1pc
Clean sponge 1pc
Manual 1pc
Application Scope
- Production lines for electronic products ,
2. Repair industry for mobile phone.
3. SMD components requiring the highest precision
₨5,132 ₨5,923
Out of stock
CompareYIHUA 9936 Constant temperature soldering iron station
Features:
- Portable cosmetic design; the entire machine is about 500 grams in weight, small in size, and easy to carry and operate.
- Efficient power supply switching; integrated power supply control system design; PID control through a icrocomputer. Fast temperature rise, only 15 seconds from 30 °C to 300 °C.
- Temperature and standby time is controlled numerically and is adjustable. The actual temperature is displayed digitally in real time.
- Intelligent software design, automatic alarm for high temperature, automatic fault detection and alarm.
- Wide application range of power supply voltage, applicable worldwide, and no power supply adapter needed.
| Weight | 1 kg |
|---|---|
| Dimensions | 15 × 10 × 10 cm |
Parameters
| parameters | |
| Rated voltage | AC 220V±10% 50Hz |
| Output power | 10-40W |
| Operating Environment | 0～40℃ relative humidity＜80％ |
| Storage environment | －20～80℃ relative humidity＜80％ |
| Dimension | 13.5*5.2*3.2CM |
| Weight | 0.5KG |
| Operating Voltage | AC 26V±10% 50Hz |
| Output power | 50W±10％ |
| Temperature range | 200℃～480℃ |
| Temperature Stability | ±1℃ （Static） |
| Display Mode | Red LED display |
| Tip-to-Ground Impedance | ＜2Ω |
| Tip-to-Ground Voltage | ＜2mV |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YIHUA 9936 Portable Soldering Station”
-
Digital Multi Meter
UNI T Benchtop Digital Multimeter UT8802E
- 20,000 Count EBTN LCD Display
- DC Voltage: 200mV/2V/20V/200V/1000V
- AC Voltage: 2V/20V/200V/750V
- DC Current: 200μA/2mA/20mA/200mA/20A
- AC Current: 2mA/20mA/200mA/20A
- Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
- Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
- Frequency: 200Hz~10MHz
- Duty cycle: 5%~99%
- Frequency response: 1 kHz
- USB Interface
- Data hold
- MAX/MIN
- Continuity buzzer
- Diode/transistor
- test
- CAT II 600V
SKU: n/a -
-
LCR Meter
UT620 Series Digital Micro Ohm Meters
UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.
SKU: UN62B0TUOM -
Clamp Meters
AC DIGITAL CLAMP METER KEW 2117R
AC DIGITAL CLAMP METER KEW 2117R
• Fully Safety jaw
• Ergonomic over-molded body gives convenient one-hand operation
• Large easy-to-read display with 0.01A resolution
• Accurate reading with True RMS
60/600/1000A auto-ranging
• Long battery life
• Safety Standard
IEC 61010-1 CAT IV 300V / CAT III 600VSKU: n/a -
DC Power Supplies
YIHUA 605D DC Power Supply
YH-605D communication maintenance power supply
605D communication maintenance power supply is a single line output of stabilized high accuracy
DC stabilized power supply. The output voltage and current can be adjusted continuously within
the rated range. Double digital display shows output voltage and current independently. Several
protection functions include current limitation, voltage reduction, short circuit protection, over-
temperature protection, etc.
The design is applied to production line of the plant, maintenance, laboratories and is also
a necessary device for the communication industry.
SKU: n/a
Related products
-
Rework & Soldering Station
YH 706 REWORK STATION
Model 706 872D+ Power Consumption 720W 720W Measurement 124*187*157MM 124*187*157MM Weight 4.5KG 4.8KG Working environment 0~50°C 0~50°C/0~122°F Storage environment -20-80°C -20-80°C Hot Air Reworks Airflow type dual-turbo blower diaphragm pump spiral wind Air Flow ≤168L/min ≤24L/min Temperature Range 100°C-480°C 100°C-480°C Temperature Stability ±1°C ±1°C Display Type Digital Display Digital Display Handle length ≥90CM ≥90CM Soldering Iron Temperature Range 200°C-480°C 200°C-480°C Temperature Stability ±2°C ±2°C Tip of ground voltage <2mv<> <2mv<> Tip ground impedance <2 ohm <2 ohm Display Type Digital Display Digital Display Handle length ≥100CM ≥100CM SKU: n/a -
Rework & Soldering Station
YIHUA 937D Repairing Soldering Iron
Standard Configuration
Main unit 1set
Soldering iron handle (include iron tips and heater) 1pc
Iron holder 1pc
High temperature resistant sponge 1pc
Manual 1pc
Power plug :1pc
Application Scope
Production lines for electronic products ,.
2. Repair industry for moblie phone.
3. SMD components requiring the highest precision.
SKU: n/a -
-
There are no reviews yet.