YIHUA 995D+ LCD 2in1 SMD Rework Station
Out of stock
What’s in the box :
* main unit + gun + power cord
* guide
* soldering iron handle
* soldering iron holder +gun frame+ clean sponge
* 4 nozzles
*1pc IC pick-up
₨21,451 ₨24,781
Out of stock
Compare1.The 995D+ now features a large LCD screen and you can easily change the LCD digital readouts back and forth “Centigrade to Fahrenheit” for the soldering iron and hot air temperatures with the push of a button.
2.This unit is digitally controlled by a Dual Core Microcomputer Processor with PID programmable temperature control technology and implantation of the most high-end precision PID program. This gives very accurate temperature control, stability, durability and reliability to this unit.
3.This unit also features “Temp Compensation Technology” that allows for quick temperature correction to maintain tip temp stability, also temperature for hot air gun and soldering iron can be programed from -50 °C to +50 °C.
- Independent calibration for both the hot air gun and the soldering iron temp for the current working environment.
- You can adjust the airflow and temperature easily.
- You can also program the soldering iron to go into a “Sleep Mode” after your desired minutes of
non-use (0 – 99 minutes), which is very convenient and energy save.
7.This model also features 3 “Memory Quick” buttons for presetting your selected value of all function for both your soldering iron and hot air gun.
- Hot air gun with “Cool Air or Hot Air ” feature. You will really like this new features.
- Hot air gun can also be programmed to be used in either a “Manual or Automatic Mode” and the hot air gun also has an “Automatic Cool Off Feature” which means that the hot air gun will go into a “Cool Off Period”. After it has been placed into its holder and has cooled off to a temperature of 100 Degrees Centigrade, it will enter a Standby Mode and the air will keep flowing. When it has cooled down to 70 Degrees Centigrade, the air will stop flowing and then you will know it is safe to turn the unit off. This is a safety feature to prevent damage to the heating element and the unit.
- You can use hot air gun and soldering iron separately, with no interference with each other. It ensures rapid warming-up and stable accurate temperature control which at the same time not affected by airflow to really achieve lead-free soldering and desoldering. Especially suitable for mounting and reworking SMD components by hand.
- The ceramic heating element and sensor in our soldering irons ensure a very rapid heat-up temperature and fast thermal recovery.
- You will also appreciate that the hot air gun on this unit has an all new protective feature. If you are in the process of using the hot air gun and the air flow stops for any reason, the heating element in the gun will stop heating so as to prevent damage to the hot air gun, thus enhancing the safety performance of this product.
13.A 75 watt output soldering iron with temp range of 200°C – 480°C / 392°F – 896°F with Silicone cord that are extremely pliable and virtually.
14.Smart temperature detection, open circuit protection, short circuit protection, and overload protection.
- Suitable for SOIC, CHIP, QFP, PLCC, BGA and temperature-sensitive components.
- Fits for heating shrink, drying, lacquer removal, viscidity removal, ice-out, pre-heating and glue soldering.
- ESD safe design of soldering iron to protect sensitive components and CE approved.
18.Extremely low noise and space saving design -“Ultimate in Small Footprint”.
| Weight | 3 kg |
|---|---|
| Dimensions | 29 × 20 × 18 cm |
PRODUCT SPECIFICATIONS:
- Model: YH-995D+
- Centigrade/Fahrenheit Programmable
- Temperature Compensation Programmable: -50 °C to +50 °C
- Manual / Automatic Programmable
- Cool Air / Hot Air Changeable
- Temperature Presettable
- Sleep Mode: 0-99 Minutes
- Samsung Dual Core Microcomputer Processor
- This Unit is ESD Safe
- Total Power Consumption: 720 Watts
- Air Flow Type: Brushless Fan With Soft Air
- Max Air Flow Volume: 120L/min
- Hot Air Gun: 500 Watts –
. Temperature Range 212° F ~ 896°F/100°C ~ 480°C with Auto Cool Down
- Hot Air Gun Temperature Stability: ±1.8°F/1.0°C
- Hot Air Gun Tube Material: 100% Silicone (Virtually No Memory)
- Soldering Iron: 75 Watts –
. TemperatureRange 392°F ~ 896°F/200°C ~ 480°C
- Soldering Iron Temperature Stability: ±3.6°F/2.0°C
- Soldering Iron Cord Material: 100% Silicone (Virtually No Memory)
- Working Environment: 0°F ~122°F/ 0°C ~ 50°C
- Storage Environment: -68°F ~176°F/-20°C ~ 80°C
- Product inner box Dimensions: 29*20.5*17cm
- Shipping Weight: 3.5 KG
- Actual Unit Weight: 3.2 KG
- QTY:8PCS/CTN
- Outer carton size:59.5*41*36cm
- G.W:25.6KG/CTN
Brand
YIHUA
Based on 0 reviews
Be the first to review “YIHUA 995D+ LCD 2in1 SMD Rework Station”
-
Insulation Tester
MIC-5001, 5000V Insulation Tester
Insulation resistance measurement in a compact, light-weight, low-cost design.
- Measurement to 5 TΩ
- Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
- Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
- Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
- Continuous display of test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement method
- Ramp Test Insulation resistance measurement
- Measurement of breakdown voltage with increments up to 1 kV / s
- Measurement of alternating and direct voltages from 0 V to 750 V
- 990 cells of memory (11880 records) to record results
- Data transfer to PC via USB cable
- Built-in rechargeable battery pack
- Meets the requirements of the EN 61557 standard
- Charge from optional car lighter (12 V) socket accessory
SKU: n/a -
-
Oscilloscopes
UTD2072CEX-II Digital Storage Oscilloscope
1. 2 channels
2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate3. Up to 28Mpts memory depth4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),10kHz or 100kHz5. Max 10Mpts waveform record6. 8-inch TFT LCD, WVGA (800X480)SKU: n/a
Related products
-
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Rework & Soldering Station
YH 948D Soldering Iron
YH 948D adopts PID programmable temperature control technology with an implantable highest-precision PID program for high-speed tracking and detection of the actual desoldering gun and soldering iron temperatures with real-time temperature correction. Yihua Desoldering Station comes in 3 in 1 design that Combines real 90W High Frequency and High Power Soldering, 130W High-Frequency Desoldering , and Vacuum Pick Up functions in a compact body..
Features Of YIHUA 948D 130W High-frequency Desoldering Station:
- Adopts PID programmable temperature control technology
- Equipped with a suction pen to help remove IC.
- The anti-static design prevents electrostatic component damage or leakage.
- Adopts an isolation transformer for power supply to heating elements and automatic shutoff functionality when the high-frequency soldering iron handle or desoldering gun handle is removed for safety and reliability.
- A portable built-in vacuum with strong suction does away with external vacuum systems.
SKU: n/a -
Rework & Soldering Station
YH 8508D Hot Air Rework Station
- 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
- 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
- 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
- 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
- 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
SKU: n/a -
There are no reviews yet.