17B WINHY DMM


0

Compare

Winhy 17B Digital Multimeter DMM

Features:

  1. 6000 counter is 35/6 automatic digital instrument, stable performance, high precision and high reliability
  2. Using a battery-driven automatic digital multimeter, the instrument uses 21mm high LCD display, reading clear.
  3. About 15 seconds delay backlit, high voltage alarm and overload protection, use more convenient.
  4. The series of instruments can be used to measure DC voltage and AC voltage DC current and AC current, resistance, capacitance diode, temperature, switch test, true RMS measurement, LED high voltage output measurement and frequency parameters is a superior performance instrument, Factories, ideal for radio enthusiasts.
  5. With automatic shutdown,frequency test, beep continuity test, overload protection as well as short circuit protection to make your power using much more safe.

Specification:

DC voltage range and accuracy: 600mV 6V 60V 600V ¡À (0.5% + 3), 1000V ¡À (0.8% + 10)
AC voltage range and accuracy: 6V 60V 600V ¡À (0.8% + 5) / 750V ¡À (1.2% + 10)
DC current range and accuracy: 600¦ÌA6000mA (0.8% + 3) / 60mA 600mA 10 (2% + 30)
AC current range and accuracy: 600¦ÌA6000¦ÌA ¡À (0.8% + 10), 60mA 600mA 10A ¡À (2% + 30)
Resistance range and accuracy: 600¦¸ (0.8% + 5) / 6K¦¸60K¦¸600K¦¸6M¦¸ ¡À (0.8% + 3), 60M¦¸ ¡À (1% + 25)
Capacitance range and accuracy: 60nf 600nf 6uf 60uf (3.5.0% + 20) / 600uf / 6000uF (¡À 5.0% + 10)
Frequency range and accuracy: 10 HZ 100HZ 1KHZ 10KHZ 100KHZ 1MHZ / 20MHZ (¡À 0.1% + 3)
Display: 6000 count
Hold mode
Backlight
Automatic shutdown
Frequency test
Beep continuity test
Overload protection
Short circuit protection

Package Include:

1 X Winhy 17B + Digital Multimeter
1 X TL75 test leads, with two caps
1 X Thermocouple temperature probe
1 X User Manual

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “17B WINHY DMM”

There are no reviews yet.

  • LKZ-720 Wires and pipe locator

    0 out of 5
    (0)

    Features:

    • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
    • phase detection mode,
    • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
    • a LED bright torch,
    • headphone socket in receiver,
    • screens backlight for work in dark,
    • transmission battery status and settings of the transmitter to the receiver
    • operation in wide range of rated voltage, up to 500V RMS,
    •  measurement of voltage at the object to 500 Vrms,
    • three levels of transmitter amplification,
    • automatic or manual selection of transmitter operation modes,
    • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
    • software upgrade via USB,
    • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
    SKU: n/a
  • MECHANIC RD Series lead-free ESD soldering tip 900M-T-I

    0 out of 5
    (0)

    MECHANIC RD Series lead-free ESD soldering tip 900M-T-I

    Good heat conduction, fast heating, corrosion resistance, antistatic,long service life

    SKU: n/a
  • MC TIP 900M TIS BLACK

    0 out of 5
    (0)
    SKU: n/a
  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
  • MRU-10 Earth Resistance Meter

    0 out of 5
    (0)

    It allows to:

    • measure earthing resistance using auxiliary electrodes,
    • measurement of resistance of auxiliary electrodes RS and RH,
    • measurement of interference voltage,
    • measurement in the presence of interference voltage in the power network with frequency 50 Hz and 60 Hz,
    • selection of maximum measuring voltage (25 V and 50 V),
    • indication of battery state.
    SKU: n/a