-
×
DT 830D DMM
- Vendor:
superworld
Subtotal: ₨700
-21%
B&M BM802A Digital AC 1000A Clamp on Meter
- AC/DC V/A Resistance Capacitance Frequency Diode Continunity
- DC 40mA/400mA (test leads only)
- Data Hold and Zero Adjustment
- 3 3/4 digit LCD Display with a maximum reading of 3999
- Auto Power-Off
Brand
China Brand
Based on 0 reviews
Be the first to review “B&M BM802A Digital AC 1000A Clamp on Meter”
-
Multimeters
UNI T Bench Top Digital Multimeter UT8803E
- 20,000 Count EBTN LCD Display
- DC Voltage: 200mV/2V/20V/200V/1000V
- AC Voltage: 2V/20V/200V/750V
- DC Current: 200μA/2mA/20mA/200mA/20A
- AC Current: 2mA/20mA/200mA/20A
- Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
- Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
- Frequency: 200Hz~10MHz
- Duty cycle: 5%~99%
- Frequency response: 1 kHz
- USB Interface
- Data hold
- MAX/MIN
- Continuity buzzer
- Diode/transistor
- test
- CAT II 600V
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
Related products
-
Clamp Meters
MT87 3 1/2 Digits LCD Digital Clamp Meter
This meter features a portable design, 31/2 LCD display and 25mm jaw opening, which can provides various measurements for AC/DC voltage, AC current, resistance, diode and continuity buzzer. It is also with functions of date hold, low battery indication, overload indication, etc. More detailed product information, please refer to the English manual.
SKU: MT 87 CLAMP METER -
Clamp Meters
UT281C True RMS AC 3000A Flexible Clamp Meters
1. 2m drop proof, IP54, ETL/Intertek certified 3rdedition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Datahold, backlight, auto power off
SKU: n/a -
Clamp Meters
UT-CS09A Flex Clamp Sensor
Specifications Range UT-CS09A AC current (A) 30A/300A/3000A ±(3%+5) Frequency response (Hz) 45Hz~500Hz √ Features Flex clamp size UT-CS09A: 25.4cm (10 inches); UT-CS09C: 45.7cm (18 inches) Operating temperature 0℃~50℃ Storage temperature -20°C~60°C Storage humidity ≤80%RH Low battery indication About 3.3V Range selection Manual General Characterisitics Power 1.5V battery (R03) x 3 Product color Red and grey Product net weight 260g Product size 267mm x 119.4mm x 34mm Standard accessories Batteries, BNC adapter Standard individual packing Blister, English manual Standard quantity per carton 10pcs Standard carton measurement 495mm x 405mm x 225mm Standard carton gross weight 7kg SKU: n/a
There are no reviews yet.