-24%

CLAMP METER AC CM 2007


Specification of the item

3,335 4,360

Compare

HTC CM-2007 600A AC Clamp Meter with Temp Frequence

  • Digital Clamp meter DC Voltage: 400mV/4V/40V/400V/600V; Resolution: 0.1mV/1mV/ 10mV/100mV/1V; Accuracy: � 1.0% + 5 digits/ � 0.5% + 5 digits
  • AC Voltage: 400mV/4V/40V/400V/600V; Resolution: 0.1mV/1mV/10mV/100mV/1V; Accuracy: �1.5% + 5 digits/ � 1.0% + 5 digits
  • AC Current: 400A to 600A; Resolution: 100mA to 1A; Accuracy: <40A �3.0% + 5 digits/ >40A �2.0% + 5 digits
  • Resistance: 400 ohm/4k?/40k?/400k?/4M?/40M?; Resolution: 0.1?/1?/ 10?/ 100M?/1k?/10 k?; Accuracy: � 0.8% + 5 digit/� 0.8% + 3 digits/� 1.2% + 5 digits
  • Capacitance: 4nF/40nF/400nF/4?F//40?F /200?F; Resolution: 1pF/10pF/100pF/1nF/10nF/100nF; Accuracy: � 5.0% + 20 digit/� 3.5% + 00 digit/� 5.0% + 10 digit
  • Frequency Range (Hz): 100Hz to 10mHz; Resolution: 0.01Hz to 1kHz; Accuracy: /� 0.5% + 5 digits/Accessories: CM-2000 Digital Clamp meter, Instruction Manual, Test Lead, Soft Caring Case / Power: AAA 1.5 x 2
Category:

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “CLAMP METER AC CM 2007”

There are no reviews yet.

  • SVC 1000VA

    0 out of 5
    (0)

    Input=120V 270
    Output=220
    Under and Over Volt Protection
    Surge Protection
    Over Load and Heat Protection
    Copper Wind with LCD Display

    SKU: n/a
  • UT502A Insulation Resistance Tester

    0 out of 5
    (0)

    1. 2000 count LCD display, overload indication, backlight

    2. AC voltage measurement, auto power off
    3. Auto discharge
    4. Continuous measurements mode, red warning light and buzzer function
    5. Continuous low resistance measurement
    6.  PI and DAR measurement, auto resistivity calculation
    7. Low resistance returning to zero function to improve accuracy
    SKU: n/a
  • UTD2025CL Digital Storage Oscilloscope

    0 out of 5
    (0)

    1. Dual analog channels width range 1mV/div~20V/div;
    2. 7 inches widescreen LCD displays;
    3. Special Print Scree Feature;
    4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
    5. USB drive system software upgrade;
    6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
    7. Automatic measurement of 28 waveform parameters;
    8. Unique waveform recording and replay function;
    9. Multilingual menu displays.

    SKU: n/a
  • TKF-12 Phase Sequence Tester

    0 out of 5
    (0)

    Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V) AC by LED signalization.
    Operation in the power network with frequency range 10…70 Hz.

    Indication of the voltage presence in the particular phases by neon lamps signalization.
    Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
    Protection against faulty indication of field rotation.

    SKU: n/a