-24%
HTC CM-2007 600A AC Clamp Meter with Temp Frequence
- Digital Clamp meter DC Voltage: 400mV/4V/40V/400V/600V; Resolution: 0.1mV/1mV/ 10mV/100mV/1V; Accuracy: � 1.0% + 5 digits/ � 0.5% + 5 digits
- AC Voltage: 400mV/4V/40V/400V/600V; Resolution: 0.1mV/1mV/10mV/100mV/1V; Accuracy: �1.5% + 5 digits/ � 1.0% + 5 digits
- AC Current: 400A to 600A; Resolution: 100mA to 1A; Accuracy: <40A �3.0% + 5 digits/ >40A �2.0% + 5 digits
- Resistance: 400 ohm/4k?/40k?/400k?/4M?/40M?; Resolution: 0.1?/1?/ 10?/ 100M?/1k?/10 k?; Accuracy: � 0.8% + 5 digit/� 0.8% + 3 digits/� 1.2% + 5 digits
- Capacitance: 4nF/40nF/400nF/4?F//40?F /200?F; Resolution: 1pF/10pF/100pF/1nF/10nF/100nF; Accuracy: � 5.0% + 20 digit/� 3.5% + 00 digit/� 5.0% + 10 digit
- Frequency Range (Hz): 100Hz to 10mHz; Resolution: 0.01Hz to 1kHz; Accuracy: /� 0.5% + 5 digits/Accessories: CM-2000 Digital Clamp meter, Instruction Manual, Test Lead, Soft Caring Case / Power: AAA 1.5 x 2
Brand
China Brand
Based on 0 reviews
Be the first to review “CLAMP METER AC CM 2007”
-
Earth Ground Resistance Testers
MRU-10 Earth Resistance Meter
It allows to:
- measure earthing resistance using auxiliary electrodes,
- measurement of resistance of auxiliary electrodes RS and RH,
- measurement of interference voltage,
- measurement in the presence of interference voltage in the power network with frequency 50 Hz and 60 Hz,
- selection of maximum measuring voltage (25 V and 50 V),
- indication of battery state.
SKU: n/a -
Clamp Meters
CMP-2000 Digital clamp-on multimeter
It provides:
- AC current measurement (TRUE RMS) up to 1500 A and DC up to 2000 A.
- Measurement of INRUSH current in start-up phase of electrical device.
- AC voltage measurement (TRUE RMS) up to 750 V and DC up to 1000 V.
- Resistance measurement and continuity test:
– continuity test with acoustic signalling (beeper) for resistance below 30 Ω. - Capacitance measurement.
- Temperature measurement (Fahrenheit or Celsius).
- Frequency measurement.
- Duty cycle measurement.
- Diode test.
SKU: n/a -
LCR Meter
MS8910 Smart SMD Tester (R/C)
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
● Display 3000 counts
● Auto Ranging
● Auto Power Off
● Data Hold
● Low Battery Display
● Auto Scanning
● Diode Check Open Voltage 2.8V
● Diode Testing Current 2mA
● Continuity Buzzer <30ΩSKU: n/a
Related products
-
Clamp Meters
UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust.
- The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage.
- UT-219DS is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
Clamp Meters
UT219M ACA Professional Clamp Meters with Motor Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust. The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage. UT-219M is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
-
Clamp Meters
MT87 3 1/2 Digits LCD Digital Clamp Meter
This meter features a portable design, 31/2 LCD display and 25mm jaw opening, which can provides various measurements for AC/DC voltage, AC current, resistance, diode and continuity buzzer. It is also with functions of date hold, low battery indication, overload indication, etc. More detailed product information, please refer to the English manual.
SKU: MT 87 CLAMP METER
There are no reviews yet.