HTC CM-2007 600A AC Clamp Meter with Temp Frequence
- Digital Clamp meter DC Voltage: 400mV/4V/40V/400V/600V; Resolution: 0.1mV/1mV/ 10mV/100mV/1V; Accuracy: � 1.0% + 5 digits/ � 0.5% + 5 digits
- AC Voltage: 400mV/4V/40V/400V/600V; Resolution: 0.1mV/1mV/10mV/100mV/1V; Accuracy: �1.5% + 5 digits/ � 1.0% + 5 digits
- AC Current: 400A to 600A; Resolution: 100mA to 1A; Accuracy: <40A �3.0% + 5 digits/ >40A �2.0% + 5 digits
- Resistance: 400 ohm/4k?/40k?/400k?/4M?/40M?; Resolution: 0.1?/1?/ 10?/ 100M?/1k?/10 k?; Accuracy: � 0.8% + 5 digit/� 0.8% + 3 digits/� 1.2% + 5 digits
- Capacitance: 4nF/40nF/400nF/4?F//40?F /200?F; Resolution: 1pF/10pF/100pF/1nF/10nF/100nF; Accuracy: � 5.0% + 20 digit/� 3.5% + 00 digit/� 5.0% + 10 digit
- Frequency Range (Hz): 100Hz to 10mHz; Resolution: 0.01Hz to 1kHz; Accuracy: /� 0.5% + 5 digits/Accessories: CM-2000 Digital Clamp meter, Instruction Manual, Test Lead, Soft Caring Case / Power: AAA 1.5 x 2
Brand
China Brand
Based on 0 reviews
Be the first to review “CLAMP METER AC CM 2007”
-
Soldering Iron
YH 929D V ELECTRIC VACUUM DESOLDERING IRON
About this item
- This 929D-V desoldering iron integrates soldering iron and desoldering pump, you can enjoy the single-handed and continuous desoldering with its short charging handle to rid the hassle of changing grip positions. If you are looking to purchase a desoldering tool that can handle the desoldering jobs of through-hole components and removing excess solder (solder bridges) without jamming up, this is a great choice.
- This is a plug-n-play desoldering iron. Plug in the power plug, allow the desoldering iron to preheat for approximately 3 minutes, and you are ready to go. YIHUA exclusive heating system combined with a strong desoldering pump ensures you experience uninterrupted desoldering.
- Different from the traditional use-and-throw desoldering irons, the 929D-V can be used, easily cleaned, and reused. You can lift and pull out the scrap solder storage tube and clean the solder out like a breeze. Meanwhile, we also included 2 different and interchangeable diameters (φ1.0mm & φ1.2mm) desoldering nozzles for different sizes of through-hole components. NOTE: change the nozzle after the desoldering iron has cooled completely.
- This desoldering iron comes with a heat deflector at the end of the heating element, and this prevents the excess heat from transferring onto the hand when desoldering continuously. You can desolder joints after joints without your hands feeling uncomfortably hot.
- Choose YIHUA with Confidence – Our US-exclusive 12-month manufacturer warranty will apply to your purchase. Plus, our team is providing professional assistance 24/7 on Amazon. NOTE: This model only works on 110-127V with its USA plug. This product contains electrical insulator protective material (mica), it is normal for the product to emit white fumes for no longer than 20 minutes on first use. This is a normal and intended occurrence for this product, please rest assure for safe usage.
SKU: n/a -
Clamp Meters
UT216D 600A True RMS Digital Clamp Meter
1. True RMS
2. Auto range, 3 times/s sampling rate3. MAX/MIN/Relative modes4. K-type temperature probe5. Flashlight6. 400Hz measurement7. NCV, non-contact AC voltage testing8. VFC, low pass filter9. Zeroing function10. Inrush current11. Analog bar graphSKU: n/a -
Earth Ground Resistance Testers
UT275 Clamp Earth Ground Testers
UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely. It can measure resistance as low as 0.01Ω and has a high resolution of 0.001Ω. It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.
SKU: 90000 -
-
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a
Related products
-
Clamp Meters
UT 208 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate
2. True RMS3. Inrush current4. Zeroing function5. Full icon display6. MAX/MIN7. Data hold; Duty cycle8. Auto power off and low battery indication9. Point contact temperature probe10. Diode; Continuity buzzer; Input Impedance for DCVSKU: n/a -
Clamp Meters
UT220 2000A ACA Digital Clamp Meters
UT220 series is a stable, safe and reliable3 1/2 AC and DC Digital Clamp Meters, full range overload protection and unique appearance design, which becomes more superior performance of electrical instruments. It is suitable for smelt, manufacturing, petroleum, electricpower, chemical industry etc. It’s an ideal tool for the maintenance and repair of the circuit, power equipment.
SKU: n/a -
Clamp Meters
UT281C True RMS AC 3000A Flexible Clamp Meters
1. 2m drop proof, IP54, ETL/Intertek certified 3rdedition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Datahold, backlight, auto power off
SKU: n/a -
Clamp Meters
UT216C 600A True RMS Digital Clamp Meters
UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
UTD216C (main features)- 1、600A AC and DC current measurement
- 2、True RMS response for ACV and ACA
- 3、Inrush current function for AC current measurement
- 4、V.F.C function for measuring signal at variable frequency
- 5、Non-contact voltage detection with LED indication
- 6、Flashlight for working at dark environment
- 7、Other functions include Capacitance, Frequency and Temperature measurements
SKU: n/a
There are no reviews yet.