CMP-400 Digital Clamp-On Multimeter
5 in stock
Additionally:
- safe, insulated measuring clamps,
- double molded housing,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- REL function,
- over range indication,
- AUTO-OFF function.
₨11,844 ₨15,794
5 in stock
CompareDC current measurement (CMP-401 only) and AC current.
Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 50.
Temperature measurement (Fahrenheit and Celsius units).
Frequency measurement.
Diode test.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 20 × 7 × 4 cm |
Temperature measurement
| Range | Accuracy |
|---|---|
| -20,0…760°C | ±(3% m.v. + 5°C) |
| -4,0…1400°F | ±(3% m.v. + 9°F) |
*probe (K type) accuracy not included
Frequency measurement
| Range | Accuracy |
|---|---|
| -10 Hz | ±(1,5% m.v. + 2 dgt) |
- sensitivity: 100 V (<50 Hz), 50 V (50…400 Hz); 15 V (401 Hz…10 kHz)
AC current measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 4,000 A | 0,001 A | ±(2,5% m.v. + 12 dgt) |
| 40,00 A | 0,01 A | ±(2,5% m.v. + 8 dgt) |
| 400,0 A | 0,1 A | ±(2,8% m.v. + 8 dgt) |
- frequency range: 50…60 Hz.
AC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 mV | 0,1 mV | ±(1,5% m.v. + 30 dgt) |
| 4,000 V | 0,001 V | ±(1,8% m.v. + 8 dgt) |
| 40,00 V | 0,01 V | ±(1,8% m.v. + 8 dgt) |
| 400,0 V | 0,1 V | ±(1,8% m.v. + 8 dgt) |
| 600 V | 1 V | ±(2,5% m.v. + 8 dgt) |
- frequency range: 50 Hz…400 Hz
DC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 mV | 0,1 mV | ±(0,8% m.v. + 2 dgt) |
| 4,000 V | 0,001 V | ±(1,5% m.v. + 2 dgt) |
| 40,00 V | 0,01 V | ±(1,5% m.v. + 2 dgt) |
| 400,0 V | 0,1 V | ±(1,5% m.v. + 2 dgt) |
| 600 V | 1 V | ±(2% m.v. + 2 dgt) |
Resistance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 Ω | 0,1 Ω | ±(1,0% m.v + 4 dgt) |
| 4,000 kΩ | 0,001 kΩ | ±(1,5% m.v. + 2 dgt) |
| 40,00 kΩ | 0,01 kΩ | ±(1,5% m.v. + 2 dgt) |
| 400,0 kΩ | 0,1 kΩ | ±(1,5% m.v. + 2 dgt) |
| 4,000 MΩ | 0,001 MΩ | ±(2,5% m.v. + 3 dgt) |
| 40,00 MΩ | 0,01 MΩ | ±(3,5% m.v. + 5 dgt) |
„m.v.”- measured value
Electric security:
– measurement category: CAT III 600 V acc. to EN 61010 – 1:2004
– protection class acc. to EN 60529: IP40
Other technical data:
– power supply: 9 V battery type 6LR61
– display: 4000 counts, backlit LCD
– continuity test: I<0,5 mA, sound signal for R<50 Ω
– diode test: I = 0,3 mA, U0 = 1,5 V DC
– over range indication: 0L displayed
– sampling rate: 2 times per second
– input impedance: 10 MΩ (V DC and V AC)
– clamp size: opening 30 mm (1,2”)
– auto power OFF: approx. 30 min.
– dimensions: 197 x 70 x 40 mm
– weight: 183 g
– accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
– quality standard ISO 9001
Rated operational conditions:
– operating temperature: 0…+40°C
– storage temperature: -20…+60°C
– operating humidity: max 80% up to 31°C
decreasing linearly to 50% at 40°C
– operating altitude: max 2000 m
Brand
SONEL
Based on 0 reviews
Be the first to review “CMP-400 Digital Clamp-On Multimeter”
-
Thermal Imagers
UNI-T UTi120 120*90 Infrared Thermal Imager -20°C~400°C Portable Mobile Camera Thermometer
Thermal ImagersUNI-T UTi120 120*90 Infrared Thermal Imager -20°C~400°C Portable Mobile Camera Thermometer
Features:USB data transfer.Real-time image dot matrix, rectangle and circle for temperature analysis, and add 6 objects arbitrarily.Adjustable emissivity from 0.01 to 0.99.You can swipe left and right to switch pictures, with photo and video functions.Diverse functions can meet the needs of multiple users-picture browsing, picture graffiti, marking, temperature analysis. In addition, it has the unique function of real-time flipping image.2 meters can resist falling.Able to carry out high and low temperature alarms.Various image modes, including thermal imaging, fusion, and picture-in-picture modes.Seven palette styles to choose from-iron oxide red, rainbow, incandescent, red hot, rock high contrast rainbow, black hot.Easy to use, install the matching mobile phone APP, connect and use it.Application: It can be used for power distribution cabinet detection, electronic circuit board detection, hvac detection, hidden danger detection of heat sources inside and outside the house, heating pipe detection and industrial inspection.SKU: n/a -
DC Power Supplies
DC Power Supply UTP3305
Features:
1. Dual channel, two circuits of adjustableoutput voltage 0~32V and one circuit of fixed voltage 5V.
2. Master-slave tracking, constant voltageand current, Ⅰ, Ⅱ circuit can be used for master-slave tracking and used in parallelor in series.
3. Forced ventilation, temperature controlcooling system. When the temperature reaches 65℃, the device dissipatesheat automatically.
4. Display mode: LED digital tube display,can show voltage and current simultaneously.
5. Low ripple, low noise
6. High regulation: 0.01%
7. Output ON/OFF control
8. Constant voltage and constant currentoperation
9. Optional European standard outputterminal
10. Overload protection, reverse polarityprotection
SKU: n/a
Related products
-
Clamp Meters
UT 208 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate
2. True RMS3. Inrush current4. Zeroing function5. Full icon display6. MAX/MIN7. Data hold; Duty cycle8. Auto power off and low battery indication9. Point contact temperature probe10. Diode; Continuity buzzer; Input Impedance for DCVSKU: n/a -
Clamp Meters
MS 2109A ACA DCA Digital Clamp Meters
● Display 6000 counts
● Jaw Opening Ф26mm/1.0″
● Auto Ranging
● Auto Power Off
● Non-Contact Voltage Detector
● Relative Measurement
● Diode Open Volatge 2.7V
● Continuity Buzzer <50±20Ω
● MAX/MIN
● Data Hold
● Display Backlight
● Work Light
● Low Battery DisplaySKU: n/a -
Clamp Meters
UT256B ACA DCA Fork Clamp Meters
UT256 series is an AC/DC fork meter with high reliability, high security, auto-range, and mini shape. Its appearance adopts creative design so that wires to be tested can be stuck by the jaw directly instead of after the jaw is pressed to open. It can measure AC/DC current provided with true RMS function. Flashlight on the meter is specially designed for smooth measurement under darkness. Full-range overload protection and distinctive appearance design make it be a new-generation practical electrical measuring meter with better performance.
SKU: n/a -
Clamp Meters
UT216B 600A True RMS Digital Clamp Meters
UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
UTD216B (main features)- 1、600A AC current measurement；
- 2、True RMS response for ACV and ACA；
- 3、99.99mF capacitance measurement；
- 4、V.F.C function for measuring signal at variable frequency ；
- 5、Non-contact voltage detection with LED indication；
- 6、Flashlight for working at dark environment.
SKU: n/a
There are no reviews yet.