CMP-400 Digital Clamp-On Multimeter
5 in stock
Additionally:
- safe, insulated measuring clamps,
- double molded housing,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- REL function,
- over range indication,
- AUTO-OFF function.
₨11,844 ₨15,794
5 in stock
CompareDC current measurement (CMP-401 only) and AC current.
Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 50.
Temperature measurement (Fahrenheit and Celsius units).
Frequency measurement.
Diode test.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 20 × 7 × 4 cm |
Temperature measurement
| Range | Accuracy |
|---|---|
| -20,0…760°C | ±(3% m.v. + 5°C) |
| -4,0…1400°F | ±(3% m.v. + 9°F) |
*probe (K type) accuracy not included
Frequency measurement
| Range | Accuracy |
|---|---|
| -10 Hz | ±(1,5% m.v. + 2 dgt) |
- sensitivity: 100 V (<50 Hz), 50 V (50…400 Hz); 15 V (401 Hz…10 kHz)
AC current measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 4,000 A | 0,001 A | ±(2,5% m.v. + 12 dgt) |
| 40,00 A | 0,01 A | ±(2,5% m.v. + 8 dgt) |
| 400,0 A | 0,1 A | ±(2,8% m.v. + 8 dgt) |
- frequency range: 50…60 Hz.
AC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 mV | 0,1 mV | ±(1,5% m.v. + 30 dgt) |
| 4,000 V | 0,001 V | ±(1,8% m.v. + 8 dgt) |
| 40,00 V | 0,01 V | ±(1,8% m.v. + 8 dgt) |
| 400,0 V | 0,1 V | ±(1,8% m.v. + 8 dgt) |
| 600 V | 1 V | ±(2,5% m.v. + 8 dgt) |
- frequency range: 50 Hz…400 Hz
DC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 mV | 0,1 mV | ±(0,8% m.v. + 2 dgt) |
| 4,000 V | 0,001 V | ±(1,5% m.v. + 2 dgt) |
| 40,00 V | 0,01 V | ±(1,5% m.v. + 2 dgt) |
| 400,0 V | 0,1 V | ±(1,5% m.v. + 2 dgt) |
| 600 V | 1 V | ±(2% m.v. + 2 dgt) |
Resistance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 Ω | 0,1 Ω | ±(1,0% m.v + 4 dgt) |
| 4,000 kΩ | 0,001 kΩ | ±(1,5% m.v. + 2 dgt) |
| 40,00 kΩ | 0,01 kΩ | ±(1,5% m.v. + 2 dgt) |
| 400,0 kΩ | 0,1 kΩ | ±(1,5% m.v. + 2 dgt) |
| 4,000 MΩ | 0,001 MΩ | ±(2,5% m.v. + 3 dgt) |
| 40,00 MΩ | 0,01 MΩ | ±(3,5% m.v. + 5 dgt) |
„m.v.”- measured value
Electric security:
– measurement category: CAT III 600 V acc. to EN 61010 – 1:2004
– protection class acc. to EN 60529: IP40
Other technical data:
– power supply: 9 V battery type 6LR61
– display: 4000 counts, backlit LCD
– continuity test: I<0,5 mA, sound signal for R<50 Ω
– diode test: I = 0,3 mA, U0 = 1,5 V DC
– over range indication: 0L displayed
– sampling rate: 2 times per second
– input impedance: 10 MΩ (V DC and V AC)
– clamp size: opening 30 mm (1,2”)
– auto power OFF: approx. 30 min.
– dimensions: 197 x 70 x 40 mm
– weight: 183 g
– accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
– quality standard ISO 9001
Rated operational conditions:
– operating temperature: 0…+40°C
– storage temperature: -20…+60°C
– operating humidity: max 80% up to 31°C
decreasing linearly to 50% at 40°C
– operating altitude: max 2000 m
Brand
SONEL
Based on 0 reviews
Be the first to review “CMP-400 Digital Clamp-On Multimeter”
-
Multimeters
UT195DS Professional Digital Multimeters
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. 5/s sampling rate
4. True RMS
5. ACV 750V 5kHz bandwidth
6. (AC+DC) or (AV+FREQ) , dual mode
7. Flashlight
8. Auto LCD backlight controlled by light sensor (can be turned off)
9. LoZ voltage test, for ghost voltage measurement
10. Motor phase sequence measurement with 2 probes
11. 20A current measurement (max 30 seconds)
12. 31 analogue bar
13. Low pass filter, 1kHz 3dB attenuation
SKU: n/a -
Power Quality Analyzer
PQM-707 Power Quality Analyzer
-
Features:
- 7″ touch screen – intuitive operating
- CAT IV 600V – high safety
- all parameters acc. to class S – high accuracy of measurements
- Li-Ion rechargeable battery – higher mobility
- removable memory card – recording data with no restrictions
Possible measurements:
- Measurements according to EN 50160,
- Voltage L1, L2, L3, N-PE (five inputs),
– average, minimum, maximum values, range to 760 V, ability to work with voltage transformers, - Current L1, L2, L3, N (four inputs),
– average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers, - Crest factor for voltage and current,
- Frequency from 40 Hz to 70 Hz ,
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
- Power recording:
- Budeanu method,
- IEEE 1459,
- Active, reactive, apparent energy,
- Power factor, cosφ, tgφ,
- Up to 50th harmonics for voltage and current,
- Total Harmonic Distortion (THD) for voltage and current,
- Short-term (PST) and long-term (PLT) flicker,
- Unbalance of voltage and current,
- Current and voltage events registration including waveforms and RMS graphs half period,
- Inrush current
- Calculator of energy tariffs
- ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
SKU: n/a -
Related products
-
Clamp Meters
UT222 2500A ACA DCA Digital Clamp Meters
UT222 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a -
Clamp Meters
UT219E ACA Professional Clamp Meters
Features
1. 2m drop proof, IP54, CAT IV 600V
2. Large 6000-digit LCD backlight (auto) display
3. True RMS
4. LoZ voltage test, for ghost voltage measurement
5. MAX/MIN/REL testing mode, data hold, excluding the test lead interference of resistance measurement
SKU: n/a -
Clamp Meters
UT216A 600A Digital Clamp Meters
UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
UTD216A (main features)- 1、600A AC current measurement
- 2、True RMS response for ACV and ACA
- 3、99.99mF capacitance measurement
- 4、Non-contact voltage detection with LED indication
- 5、Flashlight for working at dark environment
SKU: n/a -
Clamp Meters
MS 2109A ACA DCA Digital Clamp Meters
● Display 6000 counts
● Jaw Opening Ф26mm/1.0″
● Auto Ranging
● Auto Power Off
● Non-Contact Voltage Detector
● Relative Measurement
● Diode Open Volatge 2.7V
● Continuity Buzzer <50±20Ω
● MAX/MIN
● Data Hold
● Display Backlight
● Work Light
● Low Battery DisplaySKU: n/a
There are no reviews yet.