-16%

Uni-T UT337 Carbon Monoxide Meter


Suitable for use everywhere from in the house to restaurants, offices and industrial areas, the UT337A measures the exact value of carbon monoxide (CO) present in the air. Featuring a built-in sensor integrated into the top of the unit, the UT337A measures CO content from 0-1000ppm with accuracy of ±5% (5ppm) and resolution of 1ppm. The sensor is also designed to adjust rapidly to changes, ensuring you always get a stable, accurate reading. When CO levels exceed a certain threshold, the UT337A will alert the user by using a combination of audible and LED light indicators. The alarm is configurable to the user’s specification and it is also possible to use this meter to calculate temperature values.

20,056 23,980

Compare

Uni-T UT337 Carbon Monoxide Meter

  • High sensitivity sensor adjusts regularly to changes in air conditions
  • Measures levels of carbon monoxide (CO) from 0 to 1000ppm
  • Calculates air temperature measurements
  • Self-check function ensures correct operation
  • Battery powered instrument for use on the move

 

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Uni-T UT337 Carbon Monoxide Meter”

There are no reviews yet.

  • UNI T Benchtop Digital Multimeter UT8802E

    0 out of 5
    (0)
    1. 20,000 Count EBTN LCD Display
    2. DC Voltage: 200mV/2V/20V/200V/1000V
    3. AC Voltage: 2V/20V/200V/750V
    4. DC Current: 200μA/2mA/20mA/200mA/20A
    5. AC Current: 2mA/20mA/200mA/20A
    6. Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
    7. Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
    8. Frequency: 200Hz~10MHz
    9. Duty cycle: 5%~99%
    10. Frequency response: 1 kHz
    11. USB Interface
    12. Data hold
    13. MAX/MIN
    14. Continuity buzzer
    15. Diode/transistor
    16. test
    17. CAT II 600V
    SKU: n/a
  • MIC-2501,2500V Insulation Resistance Meter

    0 out of 5
    (0)

     

    Electrical safety:

    • type of insulation: double, in acc. with EN 61010-1 und IEC 61557
    • measurement category: IV 600 V (III 1000 V) in acc. to EN 61010-1
    • case protection rating in acc. with EN 60529: IP65

    Other technical specifications:

    • power supply of the meter SONEL L-1 NiMH 9,6 V; DC 12 V 2,5 A
    • weight of the meter: approx. 0,9 kg
    • dimensions: 200 x 180 x 77 mm
    • display: LCD segment display
    • measurement results memory: 990 cells, 11880 records,
    • transmission of measurement results: USB
    SKU: n/a
  • YH IRON FOR 948D

    0 out of 5
    (0)
    SKU: n/a
  • MS6812 Cable Tracker

    0 out of 5
    (0)

    The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker

    ● Sound and Light Instruction
    ● Cont and Tone LED Light

    Applications
    – Judge Continuity of the Cables or Wires
    – Track the Cables or Wires, and Diagnose the Break Point
    – Receive the Tone Signal on the Cables or Wires(Telephone Line)
    – Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
    – Send a Single Solid or a Dual Alternating Tone to the Target Cables or Wires

    SKU: n/a
  • UT50B Modern Digital Multimeters

    0 out of 5
    (0)

    UT 50-II SERIES  digital multimeter  UT-50B with AC current measuring range of 20 mA/200mA/20A modern design with automatic back light.

    SKU: n/a
  • EARTH TESTER KEW 4105A

    0 out of 5
    (0)

    • In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories.
    (unit can be hung from the neck for simplified measurement)
    • The latest circuit design permits the instrument to operate with the minimum of influence from earth voltage and earth resistance of auxiliary earth spikes.
    • Dust and drip proof. (designed to IEC 60529 IP54)
    • Earth resistance value can be read directly from the scale.
    • Designed to meet IEC 61010-1 safety standard.
    • Capable of measuring earth voltage.
    • Small and lightweight. Shock resistant new case material.
    • 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.

    SKU: n/a