Digital Storage Oscilloscope UTD2202CM

Availability:

5 in stock


Specifications and features:

1. 2 channels,1GS/s sample rate

2. 200MHzbandwidth, 16Mpts maximum memory depth

3. Waveformacquisition rate is up to 150,000wfms/s

4. Verticalsensitivity: 2mV/div~5V/div

5. Time-basedrange: 2ns/div~50s/div

6. Trigger modes:edge, pluse, runt, video, slope, alternate

7. Customized AUTO,fast captures the signals

9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform

10. 34 kinds ofauto measurements

11. Optional LAmodule

12. Standardinterfaces: USB Host,USBDevice,Pass/Fail

13. 7-inch TFT LCD,WVGA (800*480)

0

5 in stock

Compare

Specifications and features:

1. 2 channels,1GS/s sample rate

2. 200MHzbandwidth, 16Mpts maximum memory depth

3. Waveformacquisition rate is up to 150,000wfms/s

4. Verticalsensitivity: 2mV/div~5V/div

5. Time-basedrange: 2ns/div~50s/div

6. Trigger modes:edge, pluse, runt, video, slope, alternate

7. Customized AUTO,fast captures the signals

9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform

10. 34 kinds ofauto measurements

11. Optional LAmodule

12. Standardinterfaces: USB Host,USBDevice,Pass/Fail

13. 7-inch TFT LCD,WVGA (800*480)

Category:
Weight 2.5 kg
Dimensions 32 × 15 × 13 cm
Model UTD2202CM
Channels 2
Bandwidth 200MHz
Sample Rate 1GS/s
Rise Time ≤1.8ns
Memory Depth 16Mpts
Waveform Acquisition Rate ≥150,000wfms/s
Vertical Sensitivity(V/div) 2mV/div~5V/div
Time-based Range(s/div) 2ns/div~50s/div
Storage Setup, Wave, Bitmap, CSV
Trigger
Trigger Frequency 6 bits
Trigger Modes Edge, Pluse, Video, Slope, Alternate
Trigger Level Range Internal Center of the Screen±div
EXT ±1.2V
EXT/5 ±6V
Suppression Range 100ns~1.5s
Edge Trigger
Edge Mode Rising, Falling, Rising and Falling
Pluse Trigger
Trigger Mode Positive pulse width(greater than, less    than or equal to); Negative pulse width(greater than, less than or equal to)
Pluse Width Range 20ns~10s
Video Trigger
Signal Mode and Line/Field Supports standard NTSC, PAL and SECAM    signal mode, lines range is 1-525(NTSC) and 1-625(PAL/SECAM)
Slope Trigger
Trigger Mode Positive slope(greater than, less than    or equal to); Negative slope(greater than, less than or equal to)
Time Setting 20ns~10s
Measurements
Cursor Manual Mode Voltage difference between the cursor(ΔV),Time difference between cursor(ΔT),reciprocal of ΔT(Hz) (1/ΔT)
Tracking Mode Voltage value and time value of wave    point
Auto Measurements Allowed to display cursor in auto    measurement
Auto Measurements Maximum, Minimum, Peak to Peak Value,    Top Value, Amplitude, Period Average, Average, Period Mean Square    Root, Mean Square Root, Acreage, Period Acreage, Overshoot,    Undershoot, Rising Edge, Falling Edge, Frequency, Period, Rising Time,    Falling Time, Pluse Width, Positive Pluse Width, Negative Pluse Width, Burst    Pluse Width, Positive Duty Ratio, Negative Duty Ratio, Phase, FRR、FRF、FFR、FFF、LRR、LRF、LFR、LFF
Mathematics Operations Add, Subtract, ,Multiply, Divide and    Reverse Phase
Storage Waveform 10 Groups of Waveforms, 10 Kinds of    Settings
FFT Window Hanning、Hamming、Blackman、Rectangular
Sample Point 1024 points
Lissajous Figures Bandwidth 60MHz/100MHz
Phase Difference ±3 degrees
Others
Interface Standard Accessories: USB Host, USB    Device, Pass/Fail; Optional: LAN, LA
General Characteristics
Power 100~240VACrms,50Hz/60Hz
LCD Size 7 inches TFT LCD       ,WVGA(800×480)
Product Color Ivory and Grey
Product Net Weight 2.9 kg
Product Size  (W×H×D) 332mm×147mm×170mm
Standard Accessories Probes×2(1:1,10:1 switchable), Power Cord,    USB Cable, PC Software CD
Standard Individual Packing Gift Box

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Digital Storage Oscilloscope UTD2202CM”

There are no reviews yet.

  • PQM-707 Power Quality Analyzer

    0 out of 5
    (0)
    • Features:

      • 7″ touch screen – intuitive operating
      • CAT IV 600V – high safety
      • all parameters acc. to class S – high accuracy of measurements
      • Li-Ion rechargeable battery – higher mobility
      • removable memory card – recording data with no restrictions

      Possible measurements:

      • Measurements according to EN 50160,
      • Voltage L1, L2, L3, N-PE (five inputs),
        – average, minimum, maximum values, range to 760 V, ability to work with voltage transformers,
      • Current L1, L2, L3, N (four inputs),
        – average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers,
      • Crest factor for voltage and current,
      • Frequency from 40 Hz to 70 Hz ,
      • Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
      • Power recording:
        • Budeanu method,
        • IEEE 1459,
      • Active, reactive, apparent energy,
      • Power factor, cosφ, tgφ,
      • Up to 50th harmonics for voltage and current,
      • Total Harmonic Distortion (THD) for voltage and current,
      • Short-term (PST) and long-term (PLT) flicker,
      • Unbalance of voltage and current,
      • Current and voltage events registration including waveforms and RMS graphs half period,
      • Inrush current
      • Calculator of energy tariffs
      • ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
    SKU: n/a
  • UT201+ ACA Digital Clamp Meters

    0 out of 5
    (0)

    1. Auto range and 3/s sampling rate

    2. Data hold

    3. Max value hold

    4. Auto power off

    5. Low battery prompt, over-range prompt and auto polarity display

    6. Comfortable tohold and easy to carry with (Product weight: 220g)

    7. 1m drop proof

    8. Complies with Double Insulationand Over Voltage standards of CAT II 600V, CAT III 300V and Pollution Degree 2

    9. Complies with CE (European Union) directives

    SKU: n/a
  • UT207B 1000A True RMS Digital Clamp Meter

    0 out of 5
    (0)

    1. Flashlight button: Short press thisbutton to turn on/off the flashlight.
    2. Flexible current probe (optional) to extendthe AC current measurement range to3000A
    3. Inrush current capture
    4. NCV Multi-Segment Display and audio/visual alarm
    5. True RMS/Auto backlight
    6. NCV/Function retention

    SKU: n/a