-19%

DM 4070 LCR METER


7,100 8,720

Compare

DM4070 Digital LCR Meter 3 1/2 20H 2000uF 20Mohm self discharge resistance inductance capacitance meter tester

General characteristics

Display: LCD Max. display: 1999

Inductance measurement: 0.1uH~20H

Capacitance measurement: 0.1pF~2000uF

Resistance measurement: 0.01Ω~20MΩ

Zero adjustment: To obtain accurate measuring values, perform zero adjustment before measuring capacitance under 20nF

Over range: display “1”

Low battery indicator: “” symbol appears

Sampling rate: 0-5 seconds

Working temperature: 0~40°

Relative humidity: less than 80%

Meter size: 185mm×93mm×35mm (length × width × height)

Weight: Approx.290g(including 9V battery)

Power source: one 9V battery (6F22 or equivalent)

Battery life: alkaline battery lasts 150 hours

Standard accessories: test leads, operation manual

Special Function VC6013/VC6243+/DM4070
Automatic discharge Yes
Data Hold Yes
Auto power off Auto off After 30s when didn’t measuring
Backlight Delay about 10s
Function protection Yes
Shockproof protection Yes
Operation way Manual range
Sampling rate 3 times/s
Max Display 1999
LCD size 65*41mm
Battery 9V(6F22) Not include Battery

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “DM 4070 LCR METER”

There are no reviews yet.

  • UT309D Professional IR Thermometer

    0 out of 5
    (0)

    1. EBTN screen, 20 sets of data storage (UT309D)

    SKU: n/a
  • YH ELEMENT FOR 948-III

    0 out of 5
    (0)
    SKU: n/a
  • MS6812 Cable Tracker

    0 out of 5
    (0)

    The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker

    ● Sound and Light Instruction
    ● Cont and Tone LED Light

    Applications
    – Judge Continuity of the Cables or Wires
    – Track the Cables or Wires, and Diagnose the Break Point
    – Receive the Tone Signal on the Cables or Wires(Telephone Line)
    – Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
    – Send a Single Solid or a Dual Alternating Tone to the Target Cables or Wires

    SKU: n/a
  • UNI-T UT3513 DC Resistance Tester Microohmmeter 4.3 Inch LCD Screen Cable/Coil/Motor Resistance Test

    0 out of 5
    (0)
    Model UT3513
    Resistance range 20m Q/200m Q/2Q/20Q /200 Q/2kQ/20kQ
    Resolution 1 u Q/10 u Q/100 u Q/lmO/lOmQ/lOOmQ/1 Q/10Q/100Q
    Test current 1A/1A/100mA/10mA/1mA/1mA/100 uA/10 u A/l uA
    Testing terminal opencircuit voltage <1V/<1V/<1V/<1V/<5V/<5V/<5V/<5V/<3V/
    Measured parameter DC resistance
    Basic accuracy Slow: 0. 1%; Medium: 0. 2%
    Maximum reading 22000
    Range mode Auto/Manual/nominal
    Calibration Short-circuit full range zeroing
    Sorting function 3types of resistance and voltage input: exceeds upper limit/exceeds lower limit/within the range,2 types of sorting result output: PASS/FAIL
    Comparing method Absolute tolerance, percentage tolerance, direct-reading comparison
    Trigger mode Internal, external
    Test terminal Four-terminal measurement
    Button functions Lock 一一 keyboard lock, OK 一一 screenshot
    System setup Language: Chinese/English, key tone setting
    Interfaces & protocols Handler interface, RS232, USB DEVICE and USB HOST communication interface,SCPI and Modbus protocol
    Upper computer software V
    Power AC 100~240V 50/60Hz
    Display 4.3-inches LCD
    SKU: n/a