UT622A Digital Inductance LCR Meter
| Specifications | UT622A | UT622C | UT622E |
| Certificates | CE, RoHS | ||
| Test frequency | 100Hz, 120Hz, 1kHz, 10kHz | 100Hz, 120Hz, 1kHz, 10kHz, 100kHz | 100Hz, 120Hz, 1kHz, 10kHz, 100kHz |
| Test signal level | 0.1Vrms, 0.3Vrms, 1Vrms | ||
| Output impedance | 100Ω | ||
| Measurement parameters | Primary: L/C/R/Z Secondary: D/Q/θ/ESR |
Primary: L/C/R/Z/DCR Secondary: D/Q/θ/ESR | |
| Auto LCR | √ | ||
| Test terminals | Three-terminal test jacks, five-terminal test sockets | ||
| Test rate | Fast (20 times/s), medium (5 times/s), or slow (2 times/s) | ||
| DCR test rate | — | — | Fast (20 times/s), medium (5 times/s), or slow (2 times/s) |
| Ranging mode | Auto/hold | ||
| Tolerance range | 1%~20% | ||
| Testing circuit mode | Series/parallel mode | ||
| Clearing correction | Open/short circuit | ||
| Fuse of test ports | 0.1A/250V | ||
| Communication interface | Mini-USB | ||
| LED alarm for tolerance (pass: green; fail: red) |
√ | √ | √ |
| Display range | |||
| Maximum reading | 99999 | ||
| Minimum resolution | 0.0001 | ||
| Maximum accuracy | 0.001 | ||
| L | 0.00μH~99.999H | ||
| C | 0.00pF~99.999mF | ||
| Z/R | 0.0000Ω~9.9999MΩ | ||
| ESR | 0.0000Ω~999.99Ω | ||
| D | 0.0000~9.9999 | ||
| Q | 0.0000~99999 | ||
| θ | -179.9°~179.9° | ||
| DCR | — | — | 0.01mΩ–20.000MΩ |
| Temperature coefficient | 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) | ||
| General Characteristics | |||
| Power | 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A | ||
| Display | 2.8′ TFT LCD 320X240 | ||
| Product net weight | 420g | ||
| Product size | 93mm x 192mm x 44mm | ||
| Standard accessories | Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual | ||
₨57,410
CompareUT622A Digital Inductance LCR Meter
Precision LCR Meter – Up to 0.1% high accuracy measurements, the unit mainly measures inductance (L), capacitance (C), resistance (R) of components, also measures impedance (Z), dissipation factor (D), quality factor (Q), angle phase (θ), and ESR.
Accurate Measurement – Selectable 4 test frequencies of 100Hz, 120Hz, 1kHz, and 10kHz. Selectable 3 test levels of 0.1V, 0.3V, and 1V. Selectable tolerance of 1%, 5%, 10%, and 20%. Able to select parallel or series increasing accuracy of in-circuit testing. Auto-off in 5min, 15min(default), 30min, or 60min are selectable.
3 Measurement Speeds – Slow(2 times per second), medium(5 times per seconds) and fast(20 times per second).
Tolerance Comparison – Equipped with audible/visual alarm, and counter features for tolerance fail/pass test.
Data Logger – The average, maximum, minimum value can be recorded via data logging mode.
Zeroing – Open/short zeroing eliminates connection errors, deliver more accurate measurement each times.
USB to PC – Transfer data to the PC/Laptop through a USB port, and exports to image file(jpg.), Excel and PDF report is available.
Portable – High resolution LCD with 5 digit display, lightweight, portable, and battery operated.
Applied in the product development, incoming inspections, or production line testing.
Brand
UNI T
Based on 0 reviews
Be the first to review “UT622A Digital Inductance LCR Meter”
-
-
Laser Distance Meters
LM40 T Laser Tapes
Features of LM T Series Laser Tapes
Certificates: CE, UKCA
LM40T:
● One-button operation
● Single measurement
● Rear measurement reference
● Unit conversion
● Dual measurement methods
● Portable and compactLM60T:
● Single measurement
● Dual measurement mode● Portable and compact
● Continuous measurementSKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Related products
-
LCR Meter
UT603 Inductance Capacitance Meters
UT600 series RCL meter is a kind of 3.5-bithandheld digital meter with stable performance, safety, reliability, highaccuracy and manual range. It can be used to measure the magnification times β of audion, diode forward voltage drop and circuit continuity. UT601has wide capacitance measurement range from 0.1pF～20mF and highaccuracy. UT602 can hold data. UT 600 series is applicable to testingresistance, capacitance and inductance of electronic laboratory, productionline, maintenance point and teaching. It is the ideal tool of maintaining formany users.
SKU: n/a -
LCR Meter
UT612 LCR Meters
UT610 series is a handheld LCR digitalelectric bridge meter with stable performance, safety, reliability and autorange. It is professional to measure inductance, capacitance and resistance. Ithas the features of low power dissipation, high accuracy and fast speed. It canselect the series-parallel measurement mode; measure the quality factor ofcomponents, the loss, the phase angle, equivalent resistance and DC resistance.It can provide up to 5 kinds of frequency under the inductance, capacitance andresistance mode to satisfy the actual requirement.
It is applicable to measuring and filtratingthe inductance, capacitance and resistance of lab, production line, maintenancepoint and teaching. It is the ideal tool of maintaining for many users.
SKU: n/a -
LCR Meter
UT601 Inductance Capacitance Meters
UT600 series RCL meter is a kind of 3.5-bithandheld digital meter with stable performance, safety, reliability, highaccuracy and manual range. It can be used to measure the magnification times β of audion, diode forward voltage drop and circuit continuity. UT601has wide capacitance measurement range from 0.1pF～20mF and highaccuracy. UT602 can hold data. UT 600 series is applicable to testingresistance, capacitance and inductance of electronic laboratory, productionline, maintenance point and teaching. It is the ideal tool of maintaining formany users
SKU: n/a
There are no reviews yet.