UNI-T UTR2810E Benchtop LCR Meters (10kHz, 0.1%)

Related products

• LCR Meter

  UNI-T UT622E Handheld LCR Meter

  

  LCR Meter

  UNI-T UT622E Handheld LCR Meter

  

  0 out of 5

  (0)

  Features of UNI-T UT622E Handheld LCR Meter:

  • Up to 0.1% measurement accuracy
  • High-brightness white backlight
  • Ultra-low power consumption and long battery life (8 hours)
  • Maximum test speed: 20 times/s
  • Constant 100Q output impedance
  • Data hold and recording mode
  • Standard Mini-USB interface, SCPI command set

  SKU: n/a

  ₨102,000

  Add to cart

  Add to Wishlist

  Compare
• LCR Meter

  UT620 Series Digital Micro Ohm Meters

  

  LCR Meter

  UT620 Series Digital Micro Ohm Meters

  

  0 out of 5

  (0)

  UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.

  SKU: UN62B0TUOM

  ₨67,914 ₨77,391

  Read more

  Add to Wishlist

  Compare
• LCR Meter

  MS8910 Smart SMD Tester (R/C)

  

  LCR Meter

  MS8910 Smart SMD Tester (R/C)

  

  0 out of 5

  (0)

  The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
  ● Display 3000 counts
  ● Auto Ranging
  ● Auto Power Off
  ● Data Hold
  ● Low Battery Display
  ● Auto Scanning
  ● Diode Check Open Voltage 2.8V
  ● Diode Testing Current 2mA
  ● Continuity Buzzer <30Ω

  SKU: n/a

  ₨4,211 ₨5,265

  Read more

  Add to Wishlist

  Compare
• LCR Meter

  UT622A Digital Inductance LCR Meter

  

  LCR Meter

  UT622A Digital Inductance LCR Meter

  

  0 out of 5

  (0)

  Specifications	UT622A	UT622C	UT622E
  Certificates	CE, RoHS
  Test frequency	100Hz, 120Hz, 1kHz, 10kHz	100Hz, 120Hz, 1kHz, 10kHz, 100kHz	100Hz, 120Hz, 1kHz, 10kHz, 100kHz
  Test signal level	0.1Vrms, 0.3Vrms, 1Vrms
  Output impedance	100Ω
  Measurement parameters	Primary: L/C/R/Z Secondary: D/Q/θ/ESR		Primary: L/C/R/Z/DCR  Secondary: D/Q/θ/ESR
  Auto LCR	√
  Test terminals	Three-terminal test jacks, five-terminal test sockets
  Test rate	Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
  DCR test rate	—	—	Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
  Ranging mode	Auto/hold
  Tolerance range	1%~20%
  Testing circuit mode	Series/parallel mode
  Clearing correction	Open/short circuit
  Fuse of test ports	0.1A/250V
  Communication interface	Mini-USB
  LED alarm for tolerance (pass: green; fail: red)	√	√	√
  Display range
  Maximum reading	99999
  Minimum resolution	0.0001
  Maximum accuracy	0.001
  L	0.00μH~99.999H
  C	0.00pF~99.999mF
  Z/R	0.0000Ω~9.9999MΩ
  ESR	0.0000Ω~999.99Ω
  D	0.0000~9.9999
  Q	0.0000~99999
  θ	-179.9°~179.9°
  DCR	—	—	0.01mΩ–20.000MΩ
  Temperature coefficient	0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C)
  General Characteristics
  Power	3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A
  Display	2.8′ TFT LCD 320X240
  Product net weight	420g
  Product size	93mm x 192mm x 44mm
  Standard accessories	Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual

  SKU: n/a

  ₨57,410

  Add to cart

  Add to Wishlist

  Compare