-5%

LKZ-720 Wires and pipe locator

Availability:

2 in stock


Features:

  • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
  • phase detection mode,
  • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
  • a LED bright torch,
  • headphone socket in receiver,
  • screens backlight for work in dark,
  • transmission battery status and settings of the transmitter to the receiver
  • operation in wide range of rated voltage, up to 500V RMS,
  •  measurement of voltage at the object to 500 Vrms,
  • three levels of transmitter amplification,
  • automatic or manual selection of transmitter operation modes,
  • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
  • software upgrade via USB,
  • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.

200,000 210,000

2 in stock

Compare
  • Detection of wires and cables (live or not)
    • detection of cables in ceilings, walls and floors,
    • detection of breaks in cables,
    • tracing cables in building installation,
    • locating power points and switches in buildings,
    • locating short circuits between leads,
    • tracing shielded cables,
    • tracing cables in metal ducts.
  • Identification of fuses on the distribution board.
  • Tracing underground cables.
  • Tracing conductive water and heating pipelines.
  • Non-contact detection of live cables.

Electric security:

  • type of insulation: double, according to EN 61010-1
  • measurement category: CAT III 600V acc. to EN 61010-1
  • transmitter’s protection class acc. to EN 60529: IP67
  • receiver’s protection class acc. to EN 60529: IP40

Other technical data:

  • transmitter’s power supply: four AA alkaline battery or NiMH rechargeable battery
  • transmitter’s max working voltage: 500 Vrms (707 Vampl)
  • detector’s max range („I” mode) 2m
  • non-contact neon max range: 20 cm (in air), 3 cm (in concrete)
  • receiver’s power supply: battery 9V 6LR61 alkaline

Rated operational conditions:

  • operating temperature -10°C…+50°C

Brand

SONEL

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “LKZ-720 Wires and pipe locator”

There are no reviews yet.

  • JM-8132 45 in 1 Screwdriver Ratchet Hand-tools

    0 out of 5
    (0)

    Features:

    1. 45-in-1 interchangeable precise manual tool set
    2. Durable CR-V bit meets all daily needs
    3. Non-slip tough shaft ensures greater comfort and convenience
    4. Professional portable hardware tools with perfect weight & compact design for easy carry
    SKU: n/a
  • TDGC 500VA

    0 out of 5
    (0)

    Input Voltage=220V/230V
    Output Voltage=0-250V
    Maximum Output Current=2
    Copper Wind
    LCD Output Display

    SKU: n/a
  • YH 134A 60 HEATER

    0 out of 5
    (0)
    SKU: n/a
  • DIGITAL INSULATION / CONTINUITY TESTER MODEL 3005A

    0 out of 5
    (0)

    • Bargraph to display insulation resistance.
    • Displays the value of external AC voltage along with flashing symbol.
    • Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
    • Live circuit warning beeper.
    • Releasing the test button automatically discharges the charges stored in the circuit under test.
    • 200mA continuity measuring current to IEC 61557.
    • Minimum 1mA current on insulation tests to IEC 61557.

    SKU: n/a
  • UTG9002C-II Function/Arbitrary Waveform Generator

    0 out of 5
    (0)

    1. Output waveforms: Sine, square, ramp, pulse, noise, DC, arbitrary

    2. Output frequency range: Sine/square, 2MHz
    3. High-accuracy, broad-band 6 bit frequency counter, range: 100mHz~100MHz
    4. EBTN LCD screen
    SKU: n/a