1. Ergonomic exterior, comfortable handling
LM80 Laser Distance Meter
19 in stock
1. Ergonomic exterior, comfortable handling
₨7,380 ₨9,728
19 in stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 10 × 6 × 4 cm |
Specifications | LM80 |
Display type | LCD |
Display size | 2.0-inches |
Range | 80m |
Min. display unit | 0.001m |
Measurement units | m/ft/in |
Measurement basis | front/rear |
Accuracy | ±(2mm+5 x 10-5 D) |
Laser class | 2 |
Laser type | 630~670nm, ﹤1mW |
Features | |
Single measurement | √ |
Continuous measurement | √ |
Max/Min/Area | √ |
Volume | √ |
Pythagoras | √ |
Add/Subtract | √ |
Auto leveling horizontal | √ |
Auto leveling vertical | √ |
Data storage | 20 groups |
Auto power off | 3 minutes without operation |
Auto laser off | 30s without operation |
Auto backlight off | 10s without operation |
Tilt angle | ±90.0° |
Audio indication | √ |
Battery status display | √ |
Storage temperature | -20℃~70℃ |
Operating temperature | 0℃~40℃ |
Based on 0 reviews
Be the first to review “LM80 Laser Distance Meter”
-
Oscilloscopes
UNI-T 2 Channel UPO2102E Ultra Phosphor Oscilloscope
- 100MHz bandwidth
- number of channels 2
- sampling 1GS / s
- max memory depth 56Mpts (per channel) (previously 28Mpts per channel)
- waveforms per second up to 80,000 wfms/s (formerly 50,000 wfms/s)
- time base range 5ns/div – 50s/div
- input coupling (1MΩ ± 2%) // (20pF ± 3pF)
- verical axis 1mV/div – 20V/div (1MΩ)
- DC gain accuracy ± 3%
- number of saved waveforms 65000
- trigger : Edge, Window, Runt, Time Out, Nth Edge, Delay, Duration, Setup / Hold, Pulse Width, Slope, Video, Pattern, RS232 / UART, I2C, SPI
- mathematical operations with waveforms : A + B, A-B, AxB, A / B, FFT, Logic operation, Editable Advanced, Filter
- automatic Measurement : Max, Min, High, Low, Middle, Pk-Pk, Ample, Mean, Cycle Mean, RMS, Cycle RMS, Cycle Area, OverShoot, PreShoot, Period, Freq, Rise, Fall, + Width, -Width, + Duty, -Duty, RiseDelay, FallDelay, Phase, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF
- number of measurements : 5 simultaneous measurements
- statistics : Mean, Max, Min, standard deviation, number of measurements
- frequency counter : 6 bits
- standard interfaces : USB-Host, USB-Device, LAN, AUX (Trig Out, Pass / Fail)
SKU: n/a -
Multimeters
UT71C Intelligent Digital Multimeters
Product Features
1. Can set the interval forauto data recording
2. MAX/MIN/REL measurement mode
3. Peak hold
4. Analogue bar graph
5. Measure AC and DC in the same stall (AC+DC)
6. 4-20mA loop test
7. 45Hz-100kHz frequency response measurement
8. Double backlight
9. Misplug alarm
10. Auto and manual ranges selectable
11. USB interface available
12. Bluetooth connection with a cellphone for data monitoring
13. Temperature measurement mode,equipped with K-type point contact temperature probe
14. Complies with CE (European Union) and UL (United States) directives
SKU: n/a -
PHASE INDICATOR
PHASE INDICATOR KEW 8031
・Two Functions in One Unit
Presence of open phase can be checked by the lamps, and the phase
sequence can be indicated by the rotating disk.・ High Reliability
measuring range for 3-phase installations from 110V to 600V.
Sealed against dust ensures the trouble-free performance.・ Battery-free tester
SKU: n/a -
Usb Tester
UT658 DUAL USB Testers
Features of UT658 Series USB Testers
Certifications: CE, UKCA
● Type-A/C interface
● CE certification
● 10 sets of data storage
● Loop equivalent resistance measurement (1-480Ω)
● Same screen shows voltage, current, power, capacity, etc.
● Support fast charge protocol
SKU: n/a
There are no reviews yet.