1. Ergonomic exterior, comfortable handling
Laser Distance Meters
LM80 Laser Distance Meter
Availability:
20 in stock
1. Ergonomic exterior, comfortable handling
2. Millimeter accuracy
3. Large, multiple angle HD display
5. Physical and electronics leveler
6. Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more
7. Auto power off after 3 minutes without operation
₨7,380 ₨9,728
20 in stock
Compare2. Millimeter accuracy
3. Large, multiple angle HD display
5. Physical and electronics leveler
6. Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more
7. Auto power off after 3 minutes without operation
Weight | 0.4 kg |
---|---|
Dimensions | 10 × 6 × 4 cm |
Specifications | LM80 |
Display type | LCD |
Display size | 2.0-inches |
Range | 80m |
Min. display unit | 0.001m |
Measurement units | m/ft/in |
Measurement basis | front/rear |
Accuracy | ±(2mm+5 x 10-5 D) |
Laser class | 2 |
Laser type | 630~670nm, ﹤1mW |
Features | |
Single measurement | √ |
Continuous measurement | √ |
Max/Min/Area | √ |
Volume | √ |
Pythagoras | √ |
Add/Subtract | √ |
Auto leveling horizontal | √ |
Auto leveling vertical | √ |
Data storage | 20 groups |
Auto power off | 3 minutes without operation |
Auto laser off | 30s without operation |
Auto backlight off | 10s without operation |
Tilt angle | ±90.0° |
Audio indication | √ |
Battery status display | √ |
Storage temperature | -20℃~70℃ |
Operating temperature | 0℃~40℃ |
Based on 0 reviews
Be the first to review “LM80 Laser Distance Meter”
-
Battery Testers
Battery Load Tester – BT 100A
-
Sleek Design Silver Metal Body
- Easy To Use
- Convenient portable size and easy-to-read scales
- Tests batteries on or off the car in just 10 seconds
- Determines good/bad status with an extra-large display with zero adjust
- Determines state-of-charge cranking and charging volts
- Works on both 6 Volts and 12 volts batteries
SKU: n/a -
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Oscilloscopes
UTD2025CL Digital Storage Oscilloscope
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. Special Print Scree Feature;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 28 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.SKU: n/a -
There are no reviews yet.