● Display 4000 counts
● Auto and Manual Ranging
● Auto Power Off
● Relative Measurement
● Diode Open Voltage 1.5V
● Continuity Buzzer <50±20Ω
● Data Hold
● Display Backlight
● Low Battery Display
-17%
|
Specifications |
Range |
Resolution |
Accuracy |
| DC Voltage | 400mV
4V/40V/400V/1000V |
0.1mV
1mV/10mV/100mV/1V |
±(1.0%+10)
±(0.5%+3) |
| AC Voltage | 400mV
4V/40V/400V/1000V |
0.1mV
1mV/10mV/100mV/1V |
±(3.0%+3)
±(1.0%+3) |
| DC Current | 400μA/4000μA/40mA/
400mA/4A/10A |
0.1μA/1μA/10μA/
0.1mA/1mA/10mA |
±(1.5%+3)
±(1.5%+3) |
| AC Current | 400μA/4000μA/40mA/
400mA/4A/10A |
0.1μA/1μA/10μA/
0.1mA/1mA/10mA |
±(1.5%+3)
±(1.5%+3) |
| Resistance | 400Ω
4kΩ/40kΩ/400kΩ/4MΩ 40MΩ |
0.1Ω
1Ω /10Ω /100Ω /1kΩ 10kΩ |
±(0.5%+3)
±(0.5%+2) ±(1.5%+3) |
| Capacitance | 50nF
500nF/5uF/50uF/100uF |
10pF
100pF/1nF/10nF/100nF |
±(3.0%+10)
±(3.0%+5) |
| Frequency | 50Hz/500Hz/5kHz/
50kHz/100kHz |
0.01Hz/0.1Hz/1Hz/
10Hz/0.1kHz |
±(0.1%+3)
±(0.1%+3) |
| Duty Cycle | 0.1%~99% | 0.1% | ±(2.0%+5) |
| Temperature | -55℃~0℃
1℃~400℃ 401℃~1000℃ |
0.1℃
0.1℃ 1℃ |
±(9.0%+2)
±(2.0%+1) ±(2.0%) |
Brand
China Brand
Based on 0 reviews
Be the first to review “MS 8217 DMM”
-
-
Soldering Iron
YH 929D V ELECTRIC VACUUM DESOLDERING IRON
About this item
- This 929D-V desoldering iron integrates soldering iron and desoldering pump, you can enjoy the single-handed and continuous desoldering with its short charging handle to rid the hassle of changing grip positions. If you are looking to purchase a desoldering tool that can handle the desoldering jobs of through-hole components and removing excess solder (solder bridges) without jamming up, this is a great choice.
- This is a plug-n-play desoldering iron. Plug in the power plug, allow the desoldering iron to preheat for approximately 3 minutes, and you are ready to go. YIHUA exclusive heating system combined with a strong desoldering pump ensures you experience uninterrupted desoldering.
- Different from the traditional use-and-throw desoldering irons, the 929D-V can be used, easily cleaned, and reused. You can lift and pull out the scrap solder storage tube and clean the solder out like a breeze. Meanwhile, we also included 2 different and interchangeable diameters (φ1.0mm & φ1.2mm) desoldering nozzles for different sizes of through-hole components. NOTE: change the nozzle after the desoldering iron has cooled completely.
- This desoldering iron comes with a heat deflector at the end of the heating element, and this prevents the excess heat from transferring onto the hand when desoldering continuously. You can desolder joints after joints without your hands feeling uncomfortably hot.
- Choose YIHUA with Confidence – Our US-exclusive 12-month manufacturer warranty will apply to your purchase. Plus, our team is providing professional assistance 24/7 on Amazon. NOTE: This model only works on 110-127V with its USA plug. This product contains electrical insulator protective material (mica), it is normal for the product to emit white fumes for no longer than 20 minutes on first use. This is a normal and intended occurrence for this product, please rest assure for safe usage.
SKU: n/a -
Laser Power Meter
UT385 Laser Power Meter
Features of UT385 Laser Power Meter
Certificates: CE, RoHS
● Precise laser sensor
● Split design with retractable spring wire
● LCD screen for clear readings
● Data storage function● Selectable and customizable wavelengths
● Threshold alarm function
● Low power consumptionSKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
Related products
-
Digital Multi Meter
UNI-T UTi320V Thermal Image
Technical Specifications of UTi320V Thermal Image:
Specifications Model UTi320V Temperature range -20~350℃ -4℉~662℉ Temperature accuracy ±2℃ or ±2% (whichever is greater) Temperature resolution 0.1℃/0.18℉ Thermal resolution 320×240 Temperature coefficient ± 0.1/℃ or ± 0.1%/℃ (whichever is greater) Visible light resolution 640×480 Emissivity Adjustable (0.01-1.00), 0.98 in default Reflectivity Reflectivity correction (adjustable background temperature) Palettes White hot, iron red, arctic, rainbow 2, hot iron, rainbow 1 High/low temperature tracking √ High/low temperature alarm √ Image blending/Picture in picture √ WIFI mode Connects to PC software and moblie phone App Lens 7mm Focus Focus free FOV 42.5°×32.5° NETD ≤60mK Image frequency 50Hz Digital zoom ×2, ×4 General Characteristics Power 7.4V 2300mAh Li-ion battery Display 3.5-inches TFT LCD Product color Red and grey Product net weight 1.8kg (Package) Product size 258mm x 98mm x 90mm Standard accessories Li-on battery x 2, USB power supply with multi plugs,
wrist strap, adaptor×5, SD card, USB cable, PC software CDStandard individual packing Gift box, tool box, English manual Standard quantity per carton 1pcs Standard carton measurement 410mm x 265mm x 180mm Standard carton gross weight 2.2kg SKU: n/a -
There are no reviews yet.