● Display 4000 counts
● Auto and Manual Ranging
● Auto Power Off
● Relative Measurement
● Diode Open Voltage 1.5V
● Continuity Buzzer <50±20Ω
● Data Hold
● Display Backlight
● Low Battery Display
-17%
|
Specifications |
Range |
Resolution |
Accuracy |
| DC Voltage | 400mV
4V/40V/400V/1000V |
0.1mV
1mV/10mV/100mV/1V |
±(1.0%+10)
±(0.5%+3) |
| AC Voltage | 400mV
4V/40V/400V/1000V |
0.1mV
1mV/10mV/100mV/1V |
±(3.0%+3)
±(1.0%+3) |
| DC Current | 400μA/4000μA/40mA/
400mA/4A/10A |
0.1μA/1μA/10μA/
0.1mA/1mA/10mA |
±(1.5%+3)
±(1.5%+3) |
| AC Current | 400μA/4000μA/40mA/
400mA/4A/10A |
0.1μA/1μA/10μA/
0.1mA/1mA/10mA |
±(1.5%+3)
±(1.5%+3) |
| Resistance | 400Ω
4kΩ/40kΩ/400kΩ/4MΩ 40MΩ |
0.1Ω
1Ω /10Ω /100Ω /1kΩ 10kΩ |
±(0.5%+3)
±(0.5%+2) ±(1.5%+3) |
| Capacitance | 50nF
500nF/5uF/50uF/100uF |
10pF
100pF/1nF/10nF/100nF |
±(3.0%+10)
±(3.0%+5) |
| Frequency | 50Hz/500Hz/5kHz/
50kHz/100kHz |
0.01Hz/0.1Hz/1Hz/
10Hz/0.1kHz |
±(0.1%+3)
±(0.1%+3) |
| Duty Cycle | 0.1%~99% | 0.1% | ±(2.0%+5) |
| Temperature | -55℃~0℃
1℃~400℃ 401℃~1000℃ |
0.1℃
0.1℃ 1℃ |
±(9.0%+2)
±(2.0%+1) ±(2.0%) |
Brand
China Brand
Based on 0 reviews
Be the first to review “MS 8217 DMM”
-
Multimeters
CMM-40 Industrial Multimeter
The most important features of CMM-40 are:
- autoranging/manual range selection,
- „DATA HOLD” function, for holding measured values,
- „REL” function, which allows you to make measurements relative to a stored reference value,
- „MAX/MIN” function,
- „PEAK HOLD” function,
- memory for 2000 measurement resultS,
- continuity test with acoustic signalling (beeper),
- „AUTO-OFF” function,
- display 4¾ digits (40000 max),
- double molded, waterproof casing.
SKU: n/a -
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a -
Wire & Cable Testers
UT681C Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a -
Tool Kits
JM 8173 TOOL KIT
Minimum Order Quantity: 20
Pro tech screwdriver set has 69 pieces of screwdriver bits and auxiliary tools to help you complete your maintenance tasks. This pro tech screwdriver set can be used to repair and disassemble precision digital products and household products. JM-8173 pro tech screwdriver set is simple, bright, and transparent for the broad horizon, which brings you a wonderful DIY trip.
SKU: n/a
Related products
-
Digital Multi Meter
UT60EU
Product size
Standard individual packing
Product net weight
Batery
Product color
1.5V AAA x 3
Red and gray
290g
169 x 81 x 46mm
420 x 320 x 300mm
AC voltage (V)
DC current (A)
AC current (A)
Resistance (Ω)
Capacitor (F)
Frequency (Hz)
Duty cycle (%)
Temperatue (°C/°F)
Bluetooth
Display count
Auto range
REL
NCV
Diode
SKU: n/a
There are no reviews yet.