| Weight | 0.3 kg |
|---|---|
| Dimensions | 17 × 8 × 3 cm |
| Specifications | Range | UT136C+ |
| DC voltage (V) | 1000V | ±(0.7%+3) |
| AC voltage (V) | 1000V | ±(1%+3) |
| DC current (A) | 10A | ±(1%+3) |
| AC current (A) | 10A | ±(1.2%+5) |
| Resistance (Ω) | 40MΩ | ±(0.8%+2) |
| Capacitance (F) | 40mF | ±(3%+5) |
| Frequency (Hz) | 400Hz~40mHz | ±(0.1%+4) |
| Temperature (°C) | -40~1000℃ | ±(1%+4) |
| Temperature (℉) | -40~1832℉ | ±(1.5%+5) |
| Features | ||
| Display count | 4000 | |
| hFE | Transistor measurement | √ |
| Diode/transistor | √ | |
| Continuity buzzer | √ | |
| Data hold/Auto power off | √ | |
| Low battery/Indication | √ | |
| LCD backlight | √ | |
| Safety rating | CAT Ⅱ 1000V, CAT Ⅲ 600V | √ |
| Drop test | 2m | √ |
| General Characteristics | ||
| Power | 1.5V battery (R6) x 2 | |
| Display | 56.5mm x 36mm | |
| Product color | Red and grey | |
| Product net weight | 330g | |
| Product size | 175mm x 83mm x 53mm | |
| Standard accessories | Batteries, test leads, temperature probe | |
| Standard individual packing | Gift Box, English manual | |
| Standard quantity per carton | 30pcs | |
| Standard carton measurement | 390mm x 335mm x 340mm | |
| Standard carton gross weight | 12.75kg | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT136C+ Digital Multimeter”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Multimeters
UT136B+ Digital Multimeter
1. Measures up to 1000V and 10A AC/DC voltage and current
2. Equipped with 3mm protective sleeve; 2 meters drop proof3. Large LCD display; Overload alarm4. Quick sampling rate, up to 4 times/s5. Quick capacitor measurement (measures 1mF in 4 seconds)6. Low power consumption and auto power saving function; long battery service life (>500hrs)SKU: n/a -
Clamp Meters
MS 2109A ACA DCA Digital Clamp Meters
● Display 6000 counts
● Jaw Opening Ф26mm/1.0″
● Auto Ranging
● Auto Power Off
● Non-Contact Voltage Detector
● Relative Measurement
● Diode Open Volatge 2.7V
● Continuity Buzzer <50±20Ω
● MAX/MIN
● Data Hold
● Display Backlight
● Work Light
● Low Battery DisplaySKU: n/a -
Earth Ground Resistance Testers
UT275 Clamp Earth Ground Testers
UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely. It can measure resistance as low as 0.01Ω and has a high resolution of 0.001Ω. It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.
SKU: 90000
Related products
-
Multimeters
UT132A Plam Size Digital Multimeters
UT132 Series is a 3.5 digit palm sized digital multimeter with stable performance, and fashionable design. UT132 are safe and reliable manual ranged multimeters that can be used for measuring AC/DC voltage, resistance, capacitance, temperature, diode voltage drop, transistor hFE parameter, circuit continuity, square wave output and so on. Its adapter plug socket can conveniently test surface mount devices. UT132 can be used for home, schools, factories, electrical and chemical engineering, and other areas. It is a great tool for circuit maintenance and electrical equipment repair.
SKU: n/a -
Multimeters
UT107 Handheld Automotive Multi-Purpose Meters
Main Features
1. Dwell angle measurement (DWELL)
2. Tach measurement (RPM)
3. Data hold
4.12V battery test, duty ratio measurement
5. Measurement input port prompt
6. Low battery, auto polarity and over-range indication
7. Complies with CE (European Union) directives
SKU: n/a
There are no reviews yet.