-5%

UT52 Standard Digital Multimeters

Availability:

20 in stock


UT50 series is a manual range digital multimeter. Lrage display,multi purpose use.Ac dc volts,ac dc amperes resistance and buzzer functions.

6,600 6,940

20 in stock

Compare

UT50 series is a manual range digital multimeter. Lrage display,multi purpose use.Ac dc volts,ac dc amperes resistance and buzzer functions.

Category:
Weight 0.5 kg
Dimensions 19 × 9 × 3 cm
Specifications Range Best Accuracy
Model UT52
DC Voltage (V) 200mV/2V/20V/200V/1000V ±(0.5%+1)
AC Voltage (V) 200mV/2V/20V/200V/750V ±(0.8%+3)
DC Current (A) 2mA/20mA/200mA/20A ±(0.8%+1)
AC Current (A) 2mA/20mA/200mA/20A ±(1%+3)
Resistance (Ω) 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ/200MΩ ±(0.8%+1)
Capacitance (F) 2nF/20nF/200nF/2μF/20μF ±(4%+3)
Features
Fused 10A Range
Transistor
Diode
Continuity Buzzer
Low Battery Display
Input Impedance for DC Voltage Measurement 10MΩ
Max. Display 1999
General Characteristic 
Power 9V Battery (6F22)
LCD Size 65mm×33mm
Product Colour Red and Grey
Product Net Weight 560g (including holster)
Product Size 190mm×88mm×34mm
Standard Accessories Test Lead, Batteryl, Holster
Optional Accessories* Clip-On Test Lead Light (UT-TL), Built-In Test Lead Light (UT-L1), Built-In Test Lead Light Plus (UT-L2)

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT52 Standard Digital Multimeters”

There are no reviews yet.

  • UT-L40 SMD patch clamp

    0 out of 5
    (0)
    • Leads length: 450mm
    • Probe length: 5mm
    • Temperature condition: -10°C~40°C
    • Safety level: CAT Ⅱ1000V 2A
    • Features and application: used to SMT components, for UT611, UT612
    • Amount: 1PCS

     

    SKU: n/a
  • UNI-T UTG4162A Function/Arbitrary Waveform Generator

    0 out of 5
    (0)
    bandwidth 160MHz
    Channels 2
    Sampling rate 500MS/s
    Waveforms Sine, square, ramp, harmonic, pulse, noise, DC voltage, arbitrary
    Working modes Output on/off, continuous, modulation, sweep, burst
    Modulations AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM
    Frequency Characteristics
    Sine 1μHz~160MHz
    Square/Pulse 1μHz~50MHz
    Slope 1μHz~4MHz
    Harmonic 1μHz~80MHz
    Noise (-3dB) 160MHz bandwidth
    Resolution 1μHz
    Arbitrary Waveform
    Frequency range 1μHz~40MHz
    Length 8~32Mpts
    Vertical resolution 16 bits
    Min rise/fall time (typical: 1Vpp) <5ns
    General Characteristics
    Power 100V~240V ACrms, 50Hz/60Hz
    Display 8-inch TFT LCD, WVGA (800 x 480)
    Product color White and grey
    Product net weight 3.5kg
    Product size 336mm x 164mm x 108mm
    Standard accessories BNC-BNC cable x 2, USB interface cable, PC software CD, power cord
    Standard individual packing Carton box
    Standard quantity per carton 1pcs
    Standard carton measurement 405mm x 225mm x 265mmv
    SKU: n/a
  • Titan TN-3010D 30V 10A Direct Current Regulated Laboratory Power Supply

    0 out of 5
    (0)

    This unit now features a Dual LED display with highly accurate LED digital readout.

    High stabilized output voltage.

    Maximum output is 30V at 10A.

    Short circuit protection.

     

    SKU: n/a
  • YH S208J PIPE

    0 out of 5
    (0)
    SKU: n/a
  • MIC-5001, 5000V Insulation Tester

    0 out of 5
    (0)

    Insulation resistance measurement in a compact, light-weight, low-cost design.

    • Measurement to 5 TΩ
    • Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
    • Continuous indication of insulation resistance or leakage current
    • Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
    • Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
    • Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
    • Continuous display of test voltage during the measurement
    • Protection against measuring live objects
    • Two and three-lead measurement method
    • Ramp Test Insulation resistance measurement
    • Measurement of breakdown voltage with increments up to 1 kV / s
    • Measurement of alternating and direct voltages from 0 V to 750 V
    • 990 cells of memory (11880 records) to record results
    • Data transfer to PC via USB cable
    • Built-in rechargeable battery pack
    • Meets the requirements of the EN 61557 standard
    • Charge from optional car lighter (12 V) socket accessory
    SKU: n/a