UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.
Multimeters
UT81C Scope Digital Multimeter
Availability:
9 in stock
UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.
Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance
₨45,000 ₨46,000
9 in stock
CompareMultimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance.
Weight | 0.5 kg |
---|---|
Dimensions | 20 × 10 × 5 cm |
Specifications | Range | UT81C |
DMM Specifications | ||
DC voltage (V) | 1000V | ±(0.8%+8) |
AC voltage (V) | 750V | ±(1%+15) |
DC current (A) | 10A | ±(1%+8) |
AC current (A) | 10A | ±(1.5%+8) |
Resistance (Ω) | 40MΩ | ±(1%+5) |
Capacitance (F) | 100μF | ±(3%+8) |
Frequency (Hz) | 10Hz~10MHz | ±(0.1%+3) |
Scope Specifications | ||
Bandwidth | 16MHz | |
Sampling rate | 80MS/s | |
Vertical accuracy | ±(5%+1) | |
Vertical sensitivity | 20mV/div~500V/div (1-2-5) | √ |
Time-base accuracy | ±(0.01%+1) | |
Time-base range | 50ns/div – 5s/div(1-2-5) | |
Features | ||
Display count | 4000 | |
Auto range | √ | |
Duty cycle | 0.1~99.9% | √ |
Diode | √ | |
Auto power off | √ | |
Continuity buzzer | √ | |
Display | 160 x 160 monochrome | √ |
Trigger types | Auto run/Normal/Single shot | √ |
Memory | 10 screens and setups | √ |
Contrast and brightness setup | √ | |
Low battery indication | √ | |
USB interface | √ | |
LCD backlight | √ | |
Input impedance for DCV | Around 10MΩ | √ |
General Characteristics | ||
Power | 1.5V battery (R6) x 4 | |
Display | 60mm x 60mm | |
Product color | Red and grey | |
Product net weight | 498g | |
Product size | 200mm x 100mm x 48mm | |
Standard accessories | Batteries, test lead, alligator clip, USB interface cable, PC software CD | |
Standard individual packing | Gift box, English manual | |
Standard quantity per carton | 12pcs | |
Standard carton measurement | 485mm x 450mm x 260mm (0.057CBM per standard carton) | |
Standard carton gross weight | 16.4kg | |
Optional accessories | Scope probe, AC power adaptor |
Based on 0 reviews
Be the first to review “UT81C Scope Digital Multimeter”
-
Wire & Cable Testers
LKZ-1000 Wires and pipe locator
- Passive or active modes of tracing.
- Detection of underground live wires.
- Detection of underground wires with no voltage (radio mode).
- Detection of underground wires with no voltage using a transmitter (galvanised, inductive or clamp-based connection).
- Tracing metallic or non-conductive pipes using an additional probe.
- Tracing non-conductive pipelines using a “floating” probe.
- Tracing a determined cable.
- Determining the depth of a cable.
SKU: n/a -
Phase Detector Meters
TKF-12 Phase Sequence Tester
Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V) AC by LED signalization.
Operation in the power network with frequency range 10…70 Hz.
Indication of the voltage presence in the particular phases by neon lamps signalization.
Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
Protection against faulty indication of field rotation.SKU: n/a -
Clamp Meters
UT219M ACA Professional Clamp Meters with Motor Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust. The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage. UT-219M is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a
There are no reviews yet.