-10%

ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope


27,000 30,000

Compare

ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope

  • The automatic waveform mode, normal mode and single mode can be used for the waveform needs of different users.
  • The high-resolution screen provides clear and intuitive display and bright backlight.
  • 2 in 1 function, multimeter + oscilloscope, easy to use and quick measurement, convenient to use.
  • The oscilloscope probe is not needed and the waveform can be measured quickly and accurately.
  • The data waveform holding function in measurement can include 100 records and 50 waveforms.
Category:

Element Type: Oscilloscope Multimeter
Material: ABS

General <75% RHProduct size: approx. 160 x 82 x 30 mm/6.3 x 3.2 x 1.2 in analogue bandwidth 40 MHz Hz vertical resolution 8 bit input resistor approx. 10mQ Vertical Sensitivity Range 500mV/Div-200V/DivVertical Amplitude Accuracy ± (5% + 0.2div) Automatic 0 Reference During DC MeasurementTrigger Level ± 6div) (0.1div Position Setting ± 12div (0.1div per step) Cursor Measurement Function DT, 1/DT (Frequency) Automatic measuring accuracy ± (5% + 0.2div) Observation range 60 x 40 mm input resistance 10 MΩ automatic shut-off 15 minutes or deactivates operating altitude 0 – 2000 m memory capacity 100 DMM data, 50 OSC waveform recordings Storage condition-10 °C -60 °C. <90%. RHWeight: approx. 411g/14.5ozMaximum real-time sample rate 200MSPSNonlinearity ± 1bitIndexingVertical ± 6.0, horizontal 24.0Time Base Range12.5ns/div-10s/divTime Base Accuracy ± (0.01% + 0.1div) Scan ModeAuto/Normal/SingleTrigger Slope Selection. tionRising/Falling EdgeAuto ConfigurationAutomatic timebase and vertical amplitudeAutomatic measuring functionVp-p, Vavg, VrmsRecord Length24.0divAnalogue bandwidth up to 40 MHz refers to the bandwidth when the voltage is damped to 3 dB. If the input signal is disturbed, use a conversion plug and a special shielded high frequency wire. The vertical damping is 1-2-5 range switching

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope”

There are no reviews yet.

  • Uni-T UT337 Carbon Monoxide Meter

    0 out of 5
    (0)

    Suitable for use everywhere from in the house to restaurants, offices and industrial areas, the UT337A measures the exact value of carbon monoxide (CO) present in the air. Featuring a built-in sensor integrated into the top of the unit, the UT337A measures CO content from 0-1000ppm with accuracy of ±5% (5ppm) and resolution of 1ppm. The sensor is also designed to adjust rapidly to changes, ensuring you always get a stable, accurate reading. When CO levels exceed a certain threshold, the UT337A will alert the user by using a combination of audible and LED light indicators. The alarm is configurable to the user’s specification and it is also possible to use this meter to calculate temperature values.

    SKU: n/a
  • RF4 Microscope RF-7050pro- FO19 360 degree Rotatable Mobile Repair Digital Trinocular Electronic Microscope For Cell Phone

    0 out of 5
    (0)

    RF4 Microscope RF-7050pro- FO19 360 degree Rotatable Mobile Repair Digital Trinocular Electronic Microscope For Cell Phone

    SKU: n/a
  • A10T Temperature Humidity Meter

    0 out of 5
    (0)

    Main Features

    1. Sampling time: 10s

    2. Clock function: 12/24 hour mode

    3. Alarm function: Rings up to 60s

    4. Temperature measurement + Humidity measurement+ Time

    5. Temperature testing range: -10℃~50℃(14℉~122℉); Accuracy: ±1℃(±1.8℉)

    6. Humidity testing range: 10~99%RH; Precision: ±5%RH

    7. Environmental comfort rating: Comfort, wet, dry

    SKU: n/a
  • UNI-T UTi260E Professional Handheld IR Thermal Camera 256×192 pixels Wide Temperature -20ºC~550ºC with PC,WiFi,App Real Time Display

    0 out of 5
    (0)

    UTi260B

    Motor inspection:
    Using UNI-T thermal imager can detect the imbalance loading, overloading, wiring error and parts malfunction etc. Heat insulation protection is the key action for avoid fire risk, engineer can also use the thermal imager check the protection situation regularly to ensure the safety production.

    PCBA inspection:
    Using UNI-T thermal imager can quickly locate the components where temperature is abnormally higher.

    Electric inspection:
    Using UNI-T thermal imager to check the device temperature can find the problems in time on switcher, contactor, transformer etc, which maybe caused by oxidation, corrosion, poor contact.

    SKU: n/a