YH 939D+ SOLDERING STATION
Out of stock
| MODEL | 939D+ |
| RATED VOLTAGE | AC 220V±10% 50Hz |
| OUTPUT POWER | 75W |
| Constant Temperature Power (High-Speed PID Programmed to Energy Savings) | 200W±10％ |
| Withstand voltage and insulation tests | AC1500V 0.4A 60S |
| Operating Environment | 0～40℃ relative humidity＜80％ |
| Storage environment | －20～80℃ relative humidity＜80％ |
| Body size | 14.5*12*8CM |
| Weight | 2.17KG |
| Work voltage | AC 26V±10% 50Hz |
| Temperature range | 200℃～480℃ |
| Temperature Stability | ±1℃（Static） |
| Display Mode | LED Digital Display |
| Calibration Mode | PID Digitally Programmed Calibration |
| PID Temperature Calibration Cycle | 100MS |
| Heating Core | Imported High-Powered Heating Core |
| Tip-to-Ground Impedance | ＜2Ω |
| Tip-to-Ground Voltage | ＜2mV |
₨8,764 ₨10,900
Out of stock
Compare1.Three storage sections:CH1/CH2/CH3, each storage segment can store all the features of the current
machine (eg:temperature, iron sleep time,which is currently on display all function values can
be stored), you can quickly switch between each storage segment.
2. Master the core technology, SAMSUNG MCU the PID procedures to high-speed 100ms cycle real-time tracking of the temperature of the iron tips, and real-time correction, the magic temperature compensation speed, to make it more stable temperature, the temperature error is smaller and able to adapt to a variety of harsh environment.
3.The use imported heater, addition to suitable for general small solder joints ,also particularly suitable for large desoldering, solder joints, hybrid hard solder desoldering;
4. Anti-static design, which can effectively avoid damage to delicate components;
5. It has automatically detects the failure and alarm function
6. Use bran-new sturdy mold manufacturing, pressure-resistant anti-fall; blue ferroalloy Iron holder and durable.
7. The handle line is silicone line, high temperature resistance, good flexibility (300 ° C iron tips touch silicone line 30s without damage)
8. Sleep function , Automatic shutdown function , Celsius / Fahrenheit function
a), Sleep function soldering iron automatic detection of their work status are not in use in a quiescent state, arriving to set the sleep time, the temperature of the iron automatically lower the temperature to 200 ° C enter into sleep state, can effectively prevent the oxidation of iron head and prolong the iron tip service life, energy saving and environmental protection. The sleep time can be set range 0 to 99 minutes in 1 minute steps, users can be set based on usage, if you do not need a soldering iron sleep ,the sleep time is set to 0.
b) Automatic shutdown function after soldering iron enter into sleep state, start the timer program, set the shutdown time did not wake up from sleep, automatic shutdown, energy saving and environmental protection. Auto power off time setting range 0 to 99 minutes in 1 minute steps.
c) Celsius / Fahrenheit temperature display function designed to meet the market needs of the different regions of the temperature display mode.
d)-50 °C to +50 °C temperature compensation function.
9.The panel is different from traditional ,used aluminum alloy material, with new appearance design and improved performance .
10.The silvery knob give the users high-end and specialty sensor.
| Weight | 2.1 kg |
|---|---|
| Dimensions | 14 × 12 × 8 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 939D+ SOLDERING STATION”
-
Blower
Blower SE 768
● The 600 Watt Skill Electric air blower produces high velocity & high volume air output that ensures blowing out the dust, leaves from the uneasy to reach areas of household appliances, electric panel, car interiors, garden e t c.
● Dual function blower i.e blowing and extracting functions
● Powerful 600 W motor
● Variable speed control
● Ergonomic handle design
● Easy-to-change carbon brush
● 3-meter power cord for more flexible work
SKU: n/a -
Clamp Meters
UT202A+ Digital Clamp Meter
Specifications Range UT202A+ AC current (A) 600A ±(2%+10) AC current frequency (Hz) 50Hz~100Hz ±(1%+5) AC voltage (V) 600V ±(0.8%+5) AC voltage frequency(Hz) 10Hz~10kHz ±(1%+5) DC voltage (A) 600V ±(0.5%+2) Resistance (Ω) 60MΩ ±(0.8%+2) Capacitance (F) 60mF ±(4%+5) Frequency (Hz) 10Hz~10MHz ±(0.1%+4) Features Display count 6000 Auto range √ Jaw opening 28mm True RMS √ NCV √ Live wire test √ Continuity test √ Diode √ MAX/MIN √ Relative mode √ Data hold √ Low battery indication √ Auto power off √ General Characterisitics Power 1.5V battery (R03) x 2 Display 37mm x 25mm Product color Red and grey Product net weight 248g Product size 215mm x 63mm x 36mm Standard individual packing Gift box, Carring bag, English manual Standard quantity per carton 40pcs Standard carton measurement 485mm x 295mm x 385mm Standard carton gross weight 17.3kg SKU: n/a -
Multimeters
UT 133A Digital Multimeter
Specifications Range UT133A DC voltage (V) 600mV/6000mV/60V/600V ±(0.5%＋3) AC voltage (V) 600V ±(0.7%+3) DC current (A) 600uA/60mA/600mA/10A ±(1%+3) AC current (A) 10A ±(1.2%+3) Resistance (Ω) 600Ω/6000Ω/60kΩ/600kΩ/60MΩ ±(0.8%+2) Capacitance (F) 9.999nF/99.99nF/999.9nF/9.999μF/99.99μF/999.9μF/9.999mF ±(4%+5) Frequency (Hz) 10.00Hz~1.000MHz ±(0.1%+5) Temperature (℃) ‒40℃~1000℃ ±(1%+4) Temperature (℉) ‒40℉~1832℉ ±(1.5%+5) Features Display count 6000 Range selection Auto Diode √ Continuity buzzer √ NCV √ LCD backlight √ Test probe holder √ Data hold √ Low battery indication √ Overload indication √ General Characteristics Power 1.5V battery (R03) x 2 Display 56.8mm x 36.1mm Product color Red and grey Product net weight 255g (with batteries) Product size 155mm x 76.5mm x 49mm Standard accessories Manual, test leads, K-type thermocouple SKU: n/a -
Laser Level Meter
LM 571LD-I Laser Level Meter
Specifications LM571LD-I Display type Green Laser type 1V1H Expanded Angle H130°/V150° Laser class Class 2 Light source 10mW Laser wavelength 510nm H/V accuracy ±2mm/10m Self-leveling range 3°±1° Self-leveling time 3s Working distance (Line) 20m; ＞30m with detector Operating time ＞12h (All lasers on) Tripod mounting hole √ SKU: n/a -
Arbitary Waveform Generator
UTG2122B Function/Arbitrary Waveform Generator
Specifications UTG2122B Max frequency 120MHz Channels 2 Sampling rate 320MS/s Waveforms Sine, square, ramp, pulse, noise, DC, arbitrary; UTG2000B only: harmonic Working modes Output on/off, continuous, modulation, sweep, burst Modulations AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM Arbitrary Waveform Length 8pts~16Mpts Vertical resolution 16 bits (symbol included) Frequency Characteristics Sine 1μHz~60MHz Square 1μHz~25MHz Pulse 1μHz~20MHz Ramp 1μHz~3MHz Harmonic 1μHz~30MHz Arbitrary 1μHz~15MHz Noise 60MHz (-3dB) Resolution 1μHz Accuracy ±0.5ppm 25℃ First year aging rate: 1ppm Temperature coefficient: ±0.5ppm/℃ Temperature Coeifficient ＜2ppm/℃ Interfaces USB Host, USB Device, 10MHz clock source input/output General Characteristics Power 100V~240V ACrms, 50Hz/60Hz Display 4.3-inch TFT LCD, WVGA (480 x 272) Product color White and grey Product net weight 3.2kg Product size 265mm x 110mm x 320mm Standard accessories BNC-BNC cable, BNC cable with alligator clips, power cord, USB interface cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 380mm x 330mm x 320mm Standard carton gross weight 8.5kg SKU: n/a
Related products
-
Rework & Soldering Station
YH 862BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W±10％（max） 300℃ Constant Temperature Power (High-Speed PID Programmed
to Energy Savings)
250W±10％ Operating Environment 0～40℃ Relative humidity＜80％ Storage temperature －20～80℃ Relative humidity＜80％ Dimensions 31.5*22*22cm weight 3.5KG Performance Parameter Hot air gun Soldering iron Operating Voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 75W temperature range 100℃～480℃ 200℃～480℃ Air Supply Mode Brushless-Motor Fan — airflow 120L/min(max) — Temperature stability ±2℃ （static） ±2℃ （static） Display Mode Red LED Digital Display Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration
PID Digitally Programmed Calibration
Temperature correction PID digital program proofreading
PID digital program proofreading
SKU: n/a -
Rework & Soldering Station
YH 8508D Hot Air Rework Station
- 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
- 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
- 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
- 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
- 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
SKU: n/a -
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
SKU: n/a
There are no reviews yet.