The TKF-12 tester is a modern high-quality, simple and safe device. However it is recommended to get acquainted with he present manual in order to avoid measuring errors and prevent possible problems related to operation of the meter.
TKF-12 Phase Sequence Tester
1 in stock
Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V) AC by LED signalization.
Operation in the power network with frequency range 10…70 Hz.
Indication of the voltage presence in the particular phases by neon lamps signalization.
Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
Protection against faulty indication of field rotation.
₨19,741 ₨22,376
1 in stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 13 × 7 × 4 cm |
Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V) AC by LED signalization.
Operation in the power network with frequency range 10…70 Hz.
Indication of the voltage presence in the particular phases by neon lamps signalization.
Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
Protection against faulty indication of field rotation.
Electric security:
- type of insulation: double, according to EN 61010 – 1
- measurement category: CAT III 600 V acc. to EN 61010 – 1
- protection class acc. to EN 60529: IP42
Rated operational conditions:
- rated phase-to-phase voltage range: 120…690 V AC
- maximum operation phase-to-phase voltage: 760 V AC
- frequency range: 10…70 Hz
- operating temperature: -10…+45°C
- storage temperature: -20…+60°C
Other technical data:
- power supply: from the tested electrical installation, up to 15 min for max. voltage
- dimensions: 130 x 70 x 35 mm
- weight (without test leads): approx. 200g
Based on 0 reviews
Be the first to review “TKF-12 Phase Sequence Tester”
-
-
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a -
Earth Ground Resistance Testers
UT275 Clamp Earth Ground Testers
UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely. It can measure resistance as low as 0.01Ω and has a high resolution of 0.001Ω. It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.
SKU: 90000
There are no reviews yet.