YH 929D-I SOLDERING IRON
Out of stock
Model:929D-I
Voltage:220V-240V/AC,50HZ
Maximum power:135W
Rated power:16W
Temperature range:200-450℃
Temperature display：Nixie tube
Tip to ground resistance：<2Ω(3 pins plug power cord)
₨6,317 ₨6,581
Out of stock
Compare1.Heat up fast with high efficiency since this product use the internal heating element.
2.Plugable type heating element, easy to replace.
3.Adjustable and constant temperature
4.Solder Feed Iron which can operate for soldering by one-hand, convenient and efficient.
5.Easy to replace the solder tin wire.
6.With a power switch, which can be turned off when no in use, safe and energy efficient.
7.The internal use of SMT double-sided manufacturing process, the components installation processes are performed orderly to ensure clarity of electric signal flow.
| Weight | 1 kg |
|---|---|
| Dimensions | 15 × 10 × 10 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 929D-I SOLDERING IRON”
-
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Clamp Meters
UT 206B Digital Clamp Meter
Specifications Range UT206B AC current (A) 1000A ±(2%+5) AC current frequency response 50Hz~60Hz Inrush current (A) 1000A ±(10%+10) AC voltage (V) 6V ±(1.2%+3) 60V/600V/1000V ±(1%+8) DC voltage (V) 600mV ±(0.8%+3) 6V/60V ±(0.5%+5) 600V ±(0.5%+5) 1000V ±(0.5%+5) Low pas filter (LPF ACV) 600V/1000V ±(2%+5) AC voltage frequency response 40Hz~400Hz LoZ ACV 600V/1000V ±(2%+5) Resistance (Ω) 600Ω ±(1%+3) 6KΩ/60KΩ/600KΩ ±(1%+2) 6MΩ/60MΩ ±(2%+8) Capacitance (F) 60nF ±(4%+25) 600nF/6μF/60μF/600μF ±(4%+5) 6mF/60mF ±(10%+9) Temperature (℃) -40℃~300℃ ±(1%+20) 300℃~1000℃ ±(1%+2) Low voltage frequency (Hz) 10Hz~1MHz ±(0.1%+3) Duty cycle (%) 10%~90% ±(2.6%+7) Features Display count 6000 Jaw opening 42mm Current frequency 50Hz~60Hz High voltage frequency 40Hz~400Hz Analog bar 31 Auto power off √ Continuity test √ Auto/Manual range √ Low battery indication √ Diode test √ Relative mode/Data hold √ MAX/MIN √ Function selection √ Flashlight √ Wake-up function √ Auto power off current: ＜50μA √ Flexible current probe (optional) Extends to 3000A √ Input impedance (ACV/DCV) ≥10MΩ √ General Characteristics Power 1.5V battery (R03) x 3 Display 43mm x 45mm Product color Red and grey Product net weight 465g Product size 272mm x 81mm x 43.5mm Standard accessories Test leads, batteries, point contact temperature probe Standard individual packing Gift box, carrying bag, English manual Standard quantity per carton 10pcs Standard carton measurement 355mm x 330mm x 315mm Standard carton gross weight About 7.1kg SKU: n/a -
SMD Tester
UT 116A SMD Tester
Specifications Model UT116A Display count 3000 Resistance 30MΩ Capacitance 30mF Diode test 3V LED/stabilivolt About 21V/1mA Continuity Test ＜30Ω DCV 36V Auto range √ Auto scan identification √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery SKU: n/a -
DC Power Supplies
UTP1310 Switching DC Power Supply
Specifications Model UTP1310 Output voltage 0~32V Output current 0~10A Output power 320W Load regulation CV＜0.1%+5mV
CC＜0.2%+3mAPower regulation CV＜0.01%+5mV
CC＜0.2%+3mAOutput regulate resolution CV: 10mV (typical), CC: 1mA (typical) MTBF(e): ≥2000hrs Programming accuracy
(25℃±5℃)Voltage ＜0.1%+1digit Current ＜0.2%+3mA Ripple and noise
(20Hz~20MHz)Voltage ≤10mVrms Current ≤5mArms Display mode LED voltage and current dual display General Characteristics Power Input voltage: 110V AC/220V AC, 50Hz~60Hz Display EBTN LCD Product color White and grey Product size (W×H×D) 80mm x 150mm x 230mm Product net weight 2.5kg SKU: n/a
There are no reviews yet.