-8%

UDP1306C Industrial Linear DC Power Supply


Features of UDP1306C Industrial Linear DC Power Supply:

  • 4-digit high precision display
  • OVP OCP OTP protection
  • Output setting viewable
  • Remote control (output ON/OFF)
  • Shutdown memory/keypad lock
  • Intelligent cooling fan
  • USB charging interface
  • RS232 program-controlled communication
  • USB device communication
  • 5 sets of data storage

72,000 78,000

Compare

UDP1306C Industrial Linear DC Power Supply

The UDP1306C DC power supply has two groups of independentoutputs: the adjustable output of 32V/6A, which has the constantvoltage (CV) and constant current (CC) modes, and the fixedoutput of 5V/2A with protection features of short circuit andovervoltage.

Category:
Weight 8 kg
Dimensions 505 × 270 × 335 cm
Specifications
Model UDP1306C
Output voltage (CH1/CH2) 0~32V
Output current (CH1/CH2) 0~6A
Output power 192W
Display mode 3-window, 4-digit voltage, and current high precision display
Resolution Voltage 10mV
Current 1mA
Load regulation Voltage <0.01%+5mV
Current <0.1%+10mA
Power regulation Voltage <0.01%+3mV
Current <0.1%+3mA
Setting accuracy(25℃±5℃) Voltage <0.5%+20mV
Current <0.5%+10mA
Ripple and noise(20Hz~20MHz) Voltage ≤2mVrms
Current ≤3mArms
Temperature coefficient Current/Voltage: ≤300ppm/℃
Voltage rising/falling time delay ≤100ms (10% rated load)
Interfaces USB Host (5V/2A), USB Device, RS-232
General Characteristics
Power AC 100V/120V/220V/230V±10%, 50Hz/60Hz
Product net weight 7.5kg
Product size 136mm x 194mm x 327mm
Standard accessories USB communication cable, output cables, Power cord
Standard individual packing Carton box
Standard quantity per carton 1pcs
Standard carton measurement 505mm x 270mm x 335mm
Standard carton gross weight 9.6kg

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UDP1306C Industrial Linear DC Power Supply”

There are no reviews yet.

  • YH 134A 60 HEATER

    0 out of 5
    (0)
    SKU: n/a
  • UNI T UT658DUAL USB Tester

    0 out of 5
    (0)

    Features of UT658 Series USB Testers

    Certifications: CE, UKCA

    ● Type-A/C interface

    ● CE certification

    ● 10 sets of data storage

    ● Loop equivalent resistance measurement (1-480Ω)

    ● Same screen shows voltage, current, power, capacity, etc.

    ● Support fast charge protocol

    SKU: n/a
  • UT658B USB Tester

    0 out of 5
    (0)

    UT658 series USB testers are used to inspect USB chargers and portable power source of electronics products. UT658 series can output voltage, current, and power. Users can use these devices to monitor charging status of  any USB powered device.

    SKU: n/a
  • UPO2104CS 4 Channels Ultra Phosphor Oscilloscope

    0 out of 5
    (0)

    Features and Benefits:
    1、Sample Rate up to 1GS/s;
    2、Channels 4;
    3、Bandwidth 100MHz,;
    4、Memory Depth 28Mpts (Standard);
    5、Waveform Capture Rate up to 50,000wfms/s;
    6、With 256 level intensity grading display;
    7、Up to 65,000 frames for Waveform Record ,Replay;
    8、Support serial bus trigger and decoding;
    9、8 inches, TFT LCD,WVGA(800*480);
    10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

    SKU: UP21O02CSMHZ
  • TITAN Clamp Multimeter TN88A in Pakistan

    0 out of 5
    (0)

    Specifications:

    • TITAN TN88A Digital Clamp Meter 500V Insulation Tester
    • DC voltage: 1000V ± (0.8% + 2)
    • AC voltage: 750V ± (1.2% + 4)
    • Alternating current: 200A / 1000A ± (2.5% + 5)
    • Resistance: 200Ω / 20kΩ ± (1.0% + 2)
    • Insulation test 100kΩ to 2000MΩ (with option 500V insulation tester unit)
    • High Resistance: 20MΩ / 2000MΩ ± (5.0% + 2)
    • The continuity of the alarm
    • Low screen voltage
    • Data retention
    • Input impedance: 10MΩ
    • Sampling rate: 3 times / s
    • Maximum display: 1999
    • Jaw opening: 50mm
    SKU: n/a