-3%

UNI T Bench Top Digital Multimeter UT8803E


  1. 20,000 Count EBTN LCD Display
  2. DC Voltage: 200mV/2V/20V/200V/1000V
  3. AC Voltage: 2V/20V/200V/750V
  4. DC Current: 200μA/2mA/20mA/200mA/20A
  5. AC Current: 2mA/20mA/200mA/20A
  6. Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
  7. Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
  8. Frequency: 200Hz~10MHz
  9. Duty cycle: 5%~99%
  10. Frequency response: 1 kHz
  11. USB Interface
  12. Data hold
  13. MAX/MIN
  14. Continuity buzzer
  15. Diode/transistor
  16. test
  17. CAT II 600V

57,600 59,600

Compare

UNI T Bench Top Digital Multimeter UT8803E

UNI T Benchtop Digital Multimeter UT8802E is a manual range benchtop digital multimeter. This UNI T digital multimeter UT8802E that features 19999 display counts, Large LCD screen with backlight. scale overload protection and unique design. This desktop multimeter UT-8802E can be used to measure AC and DC voltage, AC and DC current, resistance, frequency, capacitance, the transistor, hFE, the diode (LEO), SCR, continuity, etc. This manual relevant safety and warning information.

 

Category:

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UNI T Bench Top Digital Multimeter UT8803E”

There are no reviews yet.

  • SVC 5000VA

    0 out of 5
    (0)

    Input=120V 270
    Output=220
    Under and Over Volt Protection
    Surge Protection
    Over Load and Heat Protection
    Copper Wind with LCD Display

    SKU: n/a
  • MECHANIC Electric glue remover IR10 Pro

    0 out of 5
    (0)

    MECHANIC Electric glue remover IR10 Pro

     

    SKU: n/a
  • ,

    JM-8160 33 In 1 Precision Screwdriver Set Iphone Repair Tool Kit

    0 out of 5
    (0)

    Accessories

    1PCS precision anti-slip handle

    1PCS H4*60mm extension bar

    1PCS multi-angle soft extension bar

    1PCS tweezer

    SKU: n/a
  • UT61D Modern Digital Multimeters

    0 out of 5
    (0)

    Product Features

    1. Analogue bar graph

    2. True RMS measurement

    3. Diode test and buzzer continuity

    4. Equipped with K-type temperature probe

    5. Auto range

    6. MAX/MIN/REL measurement mode

    7. Overload protection for all ranges

    8. Auto power off for power saving

    9. Data hold

    10. LCD backlight

    11. Equipped with RS-232C and USB standard interface

    12. Complies with CE (European Union) directives

    SKU: n/a
  • TDR-410 Cable Fault Locator

    0 out of 5
    (0)
    • Features:

      • automatic or manual mode:
        • the automatic fault location (AFL),
        • mode with manual range selection and sensitivity,
        • single measurement triggered manually or scanning continuous,
      • 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
      • maximum length of cable up to 4000 m one end of the cable,
      • “Dead zone” measure limited to 0.5 m,
      • 2.5 “LCD screen with backlight,
      • scan automatically or manually trigger,
      • sensitivity set manually or automatically adjusted,
      • adjustable impedance matching,
      • propagation coefficient adjustment 1% to 99%,
      • waterproof and resistant to mechanical housing.
      • small size and weight.
      • economical power system – 30 hours of continuously scan on one battery set..

      Accessories:

      • 0,6 m double-wire lead: WAPRZ0X6DZBB
      • red crocodile clip: WAKRORE20K02
      • Krokodylek czarny: WAKROBL20K01
      • cover M-2: WAFUTM2
    SKU: n/a
  • UT109 Automobile Multimeter (Discontinued)

    0 out of 5
    (0)

    1. Diode/Data hold

    2. Continuity buzzer
    3. Low battery indication
    4. Input protectio
    SKU: n/a