-6%

UNI T Benchtop Digital Multimeter UT8802E


  1. 20,000 Count EBTN LCD Display
  2. DC Voltage: 200mV/2V/20V/200V/1000V
  3. AC Voltage: 2V/20V/200V/750V
  4. DC Current: 200μA/2mA/20mA/200mA/20A
  5. AC Current: 2mA/20mA/200mA/20A
  6. Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
  7. Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
  8. Frequency: 200Hz~10MHz
  9. Duty cycle: 5%~99%
  10. Frequency response: 1 kHz
  11. USB Interface
  12. Data hold
  13. MAX/MIN
  14. Continuity buzzer
  15. Diode/transistor
  16. test
  17. CAT II 600V

46,800 49,800

Compare

UNI T Benchtop Digital Multimeter UT8802E

Features Of UNI-T UT-8802E Multimeter Benchtop:

  • True RMS (UT8803E)
  • Diode/transistor
  • SCR thyristor test (UT8803E)
  • Inductance measurement (UT8803E)
  • USB interface
  • EBTN LCD screen
  • Data hold
  • MAX/MIN
  • Continuity buzzer

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UNI T Benchtop Digital Multimeter UT8802E”

There are no reviews yet.

  • LKZ-720 Wires and pipe locator

    0 out of 5
    (0)

    Features:

    • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
    • phase detection mode,
    • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
    • a LED bright torch,
    • headphone socket in receiver,
    • screens backlight for work in dark,
    • transmission battery status and settings of the transmitter to the receiver
    • operation in wide range of rated voltage, up to 500V RMS,
    •  measurement of voltage at the object to 500 Vrms,
    • three levels of transmitter amplification,
    • automatic or manual selection of transmitter operation modes,
    • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
    • software upgrade via USB,
    • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
    SKU: n/a
  • 40W Soldering Iron Soldering Tool

    0 out of 5
    (0)

    soldering iron is a hand tool used to heat solder, usually from an electrical supply at high temperatures above the melting point of the metal alloy. This allows for the solder to flow between the workpieces needing to be joined.

    SKU: n/a
  • ANALOG METER YX 360TR BS

    0 out of 5
    (0)

    Features Of Handheld YX-360TRE-B Analog Meter Voltmeter:

    • High accuracy analogue multimeter for general purposes.
    • Mirrored needle indicator with an accurate reading.
    • Check both AC and DC parameters with continuity buzzer on Ohms.
    • Up to 1000V on both AC and DC Voltage.
    • 19 versatile ranges for general-purpose testing.
    • Fuse & Diode protection.
    • Compact sizing.
    • Tilt back-stand.
    • The large and mirrored scale of 80mm length.
    SKU: n/a
  • RF-7050TVP+

    0 out of 5
    (0)
    SKU: n/a