-9%

UNI T UT658DUAL USB Tester


Features of UT658 Series USB Testers

Certifications: CE, UKCA

● Type-A/C interface

● CE certification

● 10 sets of data storage

● Loop equivalent resistance measurement (1-480Ω)

● Same screen shows voltage, current, power, capacity, etc.

● Support fast charge protocol

3,480 3,815

Compare

UNI T UT658DUAL USB Tester

The second-generation UT658 series USB testers can inspect USB chargers, portable power sources, USB type A and C cables, and other electronic charging devices. UT658 measures output voltage, current, energy, capacity, circuit equivalent resistance, D+ and- voltages of USB data cables. This series is designed to be precise, reliable, stable, and portable. They are great tools for applications such as manufacturing verification, engineering testing, and DIYers.

Category:

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UNI T UT658DUAL USB Tester”

There are no reviews yet.

  • CLAMP METER AC BM 5268

    0 out of 5
    (0)
    BM5268 AC Digital Clamp meter Technical parameters
    Functions Range Accuracy
    BM5268
      DC  Voltage   400mV/4V/40V/400V/600V ±(0.8%+2)
      AC  Voltage   4/40/400/600V ±(1.2%+5)
      AC  Current   4/40/400/600A ±(2%+10)
      Ω  Resistance   400/4K/40K/400K/4M/40MΩ ±(1%+3)
      Capacitance   10n/100n/1μ/10μ/100μ/1m/10mF ±(3%+5)
       Frequency   10/100/1K/10K/100K/1M/30MHz ±(0.5%+3)
       ºC/ºF   -50ºC~1000ºC ±(1%+5)
       -58ºF~1832ºF ±(1.2%+6)
      Functions Range Accuracy
      True RMS
      Manual range
      Automatic range
      Auto power OFF About  10minutes
    Auto power OFF/Manually turn it off
      Diode Test
      VHZ      voltage measuring frequency
    Phase line recognition
      Continuity Testing
      Data hold
      INR Surge voltage
      low Battery indication
      Overload protection
    Greatest display 1999
      Jaw Size Φ30mm
            General Features
      Power                                     DC9V(6F22)Battery
      Color Gray+Red
      Weight About 220g
     Size 195×64×35mm
      Standard accessories Multimeter leads+Batteries+Temperature Sensor
      Standard Pack Color Box,User Manua
      Safety rating EN61010-1,CAT.II 600V

     

     

    SKU: n/a
  • LKZ-720 Wires and pipe locator

    0 out of 5
    (0)

    Features:

    • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
    • phase detection mode,
    • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
    • a LED bright torch,
    • headphone socket in receiver,
    • screens backlight for work in dark,
    • transmission battery status and settings of the transmitter to the receiver
    • operation in wide range of rated voltage, up to 500V RMS,
    •  measurement of voltage at the object to 500 Vrms,
    • three levels of transmitter amplification,
    • automatic or manual selection of transmitter operation modes,
    • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
    • software upgrade via USB,
    • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
    SKU: n/a
  • UNI-T MSO3152E 150MHz Mixed Signal 2 Channel Digital Oscilloscope

    0 out of 5
    (0)
    Analog bandwidth 150MHz 250MHz
    Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital
    Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels)
    Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels)
    Memory depth 70Mpts
    Waveform capture rate 200,000wfms/s
    Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display )
    Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall]
    Input impedance (1MΩ±1%) II (20pF±3pF)
    Input impedance digital (101kΩ±1%) II (9pF±1pF)
    Vertical scale 1mV/div~20 V/div (1 MΩ)
    DC gain accuracy <5mV: ±3%, ≥5mV: ±2%
    Waveform record 100,000 frames
    Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
    CAN, LIN, FlexRay
    Bus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay
    Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations
     

     

    Auto measurements

    Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
    -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
    channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A
    Measurement display 5 types
    Measurement statistics Average, Max, Min, standard deviation and number of measurements
    Frequency counter 6 bits
    Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA
     

     

    Standard Accessories

    USB interface cable UT-D14
    Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06
    Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05
    16CH Logic analyzer probe UT-15M

     

    SKU: n/a
  • JM-6123 Colorful Ring Hardware Hand Tool Set

    0 out of 5
    (0)

    Features:

    • High strength storage box with the design of collision can effectively protect the tools from external shock.
    • Working angle can be ajusted rapidly by the ratchet handle with high working efficiency.
    SKU: n/a