UNI-T UTD2202CEX+ Digital Storage Oscilloscope – 200MHz 2 Ch
UNI-T CEX+ series provides a richer trigger mode, 34 kinds of automatic parameter measurement and common mathmatical operation functions, and optimizes the panel operation, which greatly improves the work efficiency and easily cope with the measurement needs of complex signals.
Brand
UNI T
Based on 0 reviews
Be the first to review “UNI-T UTD2202CEX+ Digital Storage Oscilloscope – 200MHz 2 Ch”
-
-
Insulation Tester
UT502A Insulation Resistance Tester
1. 2000 count LCD display, overload indication, backlight
2. AC voltage measurement, auto power off3. Auto discharge4. Continuous measurements mode, red warning light and buzzer function5. Continuous low resistance measurement6. PI and DAR measurement, auto resistivity calculation7. Low resistance returning to zero function to improve accuracySKU: n/a -
Earth Ground Resistance Testers
MRU-30 Earth Resistance and Resistivity Meter
-
It allows to take the measurements of:
- earthing resistance using auxiliary electrodes,
- earthing resistance using auxiliary electrodes and clamp (for measurements of multiple earthing),
- earthing resistance using double clamps for measuring multiple earthing without underground connections.
- ground resistivity (Wenner method),
- continuity of equipotential bondings and protective
- conductors (meeting the requirements IEC 60364) with auto-zero function – with current 200mA.
Additionally:
- measurement of resistance of auxiliary electrodes RS and RH,
- measurement of interference voltage,
- measurement in the presence of interference voltage in the power network
- with frequency 50Hz, 60Hz,
- selection of maximum measuring voltage (25V and 50V),
- introducing the distance between the electrodes for the resistivity in metres (m) and feet (ft),
- memory of 990 measurements (10 banks of 99 cells each),
- calibration of clamp used,
- data transmission to the computer (USB),
- indication of battery state.
SKU: n/a -
-
-
Oscilloscopes
UTD2102CEX Digital Storage Oscilloscope
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. The new interface style;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 32 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.
SKU: n/a
Related products
-
Oscilloscopes
UPO2104CS 4 Channels Ultra Phosphor Oscilloscope
Features and Benefits:
1、Sample Rate up to 1GS/s；
2、Channels 4；
3、Bandwidth 100MHz，；
4、Memory Depth 28Mpts (Standard)；
5、Waveform Capture Rate up to 50,000wfms/s；
6、With 256 level intensity grading display；
7、Up to 65,000 frames for Waveform Record ,Replay；
8、Support serial bus trigger and decoding；
9、8 inches, TFT LCD，WVGA(800*480)；
10、Interface：USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.SKU: UP21O02CSMHZ -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Oscilloscopes
UNI-T 2 Channel UPO2102E Ultra Phosphor Oscilloscope
- 100MHz bandwidth
- number of channels 2
- sampling 1GS / s
- max memory depth 56Mpts (per channel) (previously 28Mpts per channel)
- waveforms per second up to 80,000 wfms/s (formerly 50,000 wfms/s)
- time base range 5ns/div – 50s/div
- input coupling (1MΩ ± 2%) // (20pF ± 3pF)
- verical axis 1mV/div – 20V/div (1MΩ)
- DC gain accuracy ± 3%
- number of saved waveforms 65000
- trigger : Edge, Window, Runt, Time Out, Nth Edge, Delay, Duration, Setup / Hold, Pulse Width, Slope, Video, Pattern, RS232 / UART, I2C, SPI
- mathematical operations with waveforms : A + B, A-B, AxB, A / B, FFT, Logic operation, Editable Advanced, Filter
- automatic Measurement : Max, Min, High, Low, Middle, Pk-Pk, Ample, Mean, Cycle Mean, RMS, Cycle RMS, Cycle Area, OverShoot, PreShoot, Period, Freq, Rise, Fall, + Width, -Width, + Duty, -Duty, RiseDelay, FallDelay, Phase, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF
- number of measurements : 5 simultaneous measurements
- statistics : Mean, Max, Min, standard deviation, number of measurements
- frequency counter : 6 bits
- standard interfaces : USB-Host, USB-Device, LAN, AUX (Trig Out, Pass / Fail)
SKU: n/a
There are no reviews yet.