UT120B Pocket Size Type Digital Multimeters
19 in stock
Main Features
1. Auto range
2. Auto polarity indication
3. Relative mode
4. Data hold
5. Auto power off
6. Capacitance measurement
7. Complies with CE (European Union) directives
₨4,620 ₨4,878
19 in stock
CompareMain Features
1. Auto range
2. Auto polarity indication
3. Relative mode
4. Data hold
5. Auto power off
6. Capacitance measurement
7. Complies with CE (European Union) directives
| Weight | 0.1 kg |
|---|---|
| Dimensions | 11 × 6 × 11 cm |
| Specifications | Range | Best Accuracy |
| Model | UT120B | |
| DC Voltage (V) | 4V/40V/400V/600V | ±(0.8%+3) |
| AC Voltage (V) | 4V/40V/400V/600V | ±(1.2%+3) |
| Resistance (Ω) | 400Ω/4KΩ/40KΩ/400KΩ/4MΩ/40MΩ | ±(1%+2) |
| Capacitance (F) | 4nF/40nF/400nF/4μF/40μF/100μF | ±(4%+3) |
| Frequency (Hz) | 99.99Hz~99.99KHz | ±(0.5%+3) |
| Features | ||
| Display Count | 4000 | |
| Auto Range | √ | |
| Duty Cycle | 0.1%~99.9% | √ |
| Diode | √ | |
| Auto Power Off | Around 30 Minutes | √ |
| Continuity Buzzer | √ | |
| Low Battery Indication | ≤2.4V | √ |
| Data Hold | √ | |
| Relative Mode | √ | |
| Input Impedance for DCV | Around 10MΩ | √ |
| General Characteristic | ||
| Power | 3V Battery(CR2032) | |
| LCD Size | 43mm X 22mm | |
| Product Color | Red and Grey | |
| Product Net Weight | 76g | |
| Product Size | 110mm X 58.2mm X 10.8mm | |
| Standard Accessories | Battery,Carrying Case | |
| Standard Individual Packing | Blister, English Manual | |
| Standard Quantity Per Carton | 90 PCs | |
| Standard Carton Measurement | 528mm X 323mm X 400mm (0.068 CBM Per Export Carton) | |
| Standard Carton Gross Weight | 13.5 Kg | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT120B Pocket Size Type Digital Multimeters”
-
Welding Machine
Mechanic W08 Portable Mini Battery Welder Spot Welding Machine
1. W08 Mini Precision Spot Welding Machine Suitable for precision welding of mobile phone electronic components, battery plate replacement, lithium battery nickel sheet, etc.
2. W08 portable spot welder uses a high-multiplier lithium battery as the power supply, mainly used for welding of nickel sheets of cylindrical batteries. This W08 DIY soldering machine can be used to solder the battery protection board when replacing the battery.SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
There are no reviews yet.