UT120C Pocket Size Type Digital Multimeters
20 in stock
Main Features
1. Auto range
2. Auto polarity indication
3. Relative mode
4. Data hold
5. Auto power off
6. Capacitance measurement
7. AC/DC current measurement
8. Complies with CE (European Union) directives
₨5,040 ₨5,214
20 in stock
CompareMain Features
1. Auto range
2. Auto polarity indication
3. Relative mode
4. Data hold
5. Auto power off
6. Capacitance measurement
7. AC/DC current measurement
8. Complies with CE (European Union) directives
| Weight | 0.1 kg |
|---|---|
| Dimensions | 11 × 6 × 11 cm |
| Specifications | Range | Best Accuracy |
| Model | UT120C | |
| DC Voltage (V) | 4V/40V/400V/600V | ±(0.8%+3) |
| AC Voltage (V) | 4V/40V/400V/600V | ±(1.2%+3) |
| DC Current (A) | 400μA/4mA/40mA/400mA | ±(1.0%+3) |
| AC Current (A) | 400μA/4mA/40mA/400mA | ±(1.5%+5) |
| Resistance (Ω) | 400Ω/4KΩ/40KΩ/400KΩ/4MΩ/40MΩ | ±(1%+2) |
| Capacitance (F) | 4nF/40nF/400nF/4μF/40μF/100μF | ±(4%+3) |
| Frequency (Hz) | 99.99Hz~99.99KHz | ±(0.5%+3) |
| Features | ||
| Display Count | 4000 | |
| Auto Range | √ | |
| Duty Cycle | 0.1%~99.9% | √ |
| Diode | √ | |
| Auto Power Off | Around 30 Minutes | √ |
| Continuity Buzzer | √ | |
| Low Battery Indication | ≤2.4V | √ |
| Data Hold | √ | |
| Relative Mode | √ | |
| Input Impedance for DCV | Around 10MΩ | √ |
| General Characteristic | ||
| Power | 3V Battery(CR2032) | |
| LCD Size | 43mm X 22mm | |
| Product Color | Red and Grey | |
| Product Net Weight | 76g | |
| Product Size | 110mm X 58.2mm X 10.8mm | |
| Standard Accessories | Battery,Carrying Case | |
| Standard Individual Packing | Blister, English Manual | |
| Standard Quantity Per Carton | 90 PCs | |
| Standard Carton Measurement | 528mm X 323mm X 400mm (0.068 CBM Per Export Carton) | |
| Standard Carton Gross Weight | 13.5 Kg | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT120C Pocket Size Type Digital Multimeters”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Clamp Meters
UT208B 1000A True RMS Digital Clamp Meters
Features of UT200 Series 1000A True RMS Digital Clamp Meters
Certifications: CE, UKCA, cETLus
● Flashlight button: Short press this button to turn on/off the flashlight
● NCV Multi-Segment Display and audio/visual alarm● True RMS/Auto backlight● NCV/Function retentionSKU: n/a -
Environment Meters
UT351 Sound Level Meters
UT350 series digital sound level meter with stable performance, safety and reliability can be widely used for environmental protection, laborhygiene, industrial enterprise, scientific research and teaching. It is applied to environmental noise measurement, machinery equipment noise measurement and architectural acoustics measurement.
SKU: n/a -
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a
Related products
-
Multimeters
UT18B Voltage And Continuity Testers
UT18 series of test pen with measuring AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD test, single pen measurement (can determine the zero line or wire), self checking, no battery detection and other functions.
Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. Also used to solve complex problems of electronic, factory automation, power distribution and electrical equipment in.SKU: n/a
There are no reviews yet.