UT125C is a pocket size, ergonomic and reliable multimeter with 4000 display counts. It is a useful tool for electronics DIYers working with low currents (< 0.4A). This product is CE/cETLus certified and complies with CAT III 600V.
Multimeters
UT125C Pocket Size Digital Multimeter
Availability:
20 in stock
1. Small size, easy to carry and operate
2. 600V DC/AC voltage measurement
3. 400mA DC/AC current measurement
4. Resistance/Capacitance/Diode/Continuity test
5. Frequency/Duty cycle measurement
6. CE (EMC, LVD, RoHS), cETLus
7. CAT III 600V
8. 1m drop test
₨5,160 ₨5,214
20 in stock
CompareWeight | 0.2 kg |
---|---|
Dimensions | 11 × 6 × 3 cm |
Specifications | Range | UT125C |
DC voltage (V) | 600V | ±(0.5%+5) |
AC voltage (V) | 600V | ±(1.2%+5) |
DC current (A) | 400mA | ±(1.8%+5) |
AC current (A) | 400mA | ±(2%+8) |
Resistance (Ω) | 40MΩ | ±(1%+5) |
Capacitance (F) | 100μF | ±(4%+10) |
Frequency (Hz) | 10Hz~60kHz | ±(0.1%+5) |
Duty cycle | 20%~80% | Reference |
Features | ||
NCV | √ | |
Diode test/Continuity test | √ | |
Low battery indication | √ | |
Data hold/Auto power off | √ | |
Operating temperature | 0℃~50℃ | |
General Characteristics | ||
Power | 1.5V battery (R03) x 2 | |
Display | 38mm x 23mm | |
Product color | Red and grey | |
Product net weight | 180g | |
Product size | 112mm x 58mm x 35mm | |
Standard accessories | Batteries | |
Standard individual packing | Gift box, English manual | |
Standard quantity per carton | 60pcs | |
Standard carton measurement | 500mm x 290mm x 280mm | |
Standard carton gross weight | 13.1kg |
Based on 0 reviews
Be the first to review “UT125C Pocket Size Digital Multimeter”
-
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
There are no reviews yet.