UT18C Voltage And Continuity Testers
UT18 series of test pen with measuring AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD test, single pen measurement (can determine the zero line or wire), self checking, no battery detection and other functions.
Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. Also used to solve complex problems of electronic, factory automation, power distribution and electrical equipment in.
₨10,800 ₨13,000
UT18 series of test pen with measuring AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD test, single pen measurement (can determine the zero line or wire), self checking, no battery detection and other functions.
Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. Also used to solve complex problems of electronic, factory automation, power distribution and electrical equipment in.
| Weight | 0.3 kg |
|---|---|
| Dimensions | 27 × 9 × 3 cm |
| Specifications | Range | Best Accuracy |
| Model | UT18C | |
| LED AC/DC Voltage Indication (V) | 12V | 8V±2V |
| 24V | 18V±2V | |
| 50V | 38V±4V | |
| 120V | 92V±6V | |
| 230V | 174V±8V | |
| 400V | 320V±10V | |
| 690V | 550V±15V | |
| Phase Rotation Test | Operating Voltage: 100V~690V | √ |
| Frequency：50Hz~ 60Hz | ||
| Single Lead(L2)Voltage Detection | Operating Voltage：100V~690V | √ |
| Frequency: 50Hz~ 400Hz | ||
| Continuity Test | Resistance: 0~100KΩ | √ |
| Beeper and LED light Indicator | ||
| RCD Test | Operating Voltage：230V(50Hz～400Hz) | √ |
| Polarity Detection | Positive & Negative | √ |
| Self-inspection | All LED or LCD indicator | √ |
| No Power Test | Operating Voltage: 50VAC/120VDC~690VDC/AC | √ |
| Features | ||
| IP65 | √ | |
| Auto Range | All Range | √ |
| Exceed Voltage | Voltage Range：713V～788V | √ |
| Auto standby | standby current <10uA | √ |
| Silent mode | All Range | √ |
| Work Light | All Range | √ |
| Low Battery Indication | Voltage Range：2.2V～2.4V | √ |
| LCD Display (Voltage+frequency) | 6V~ 690V (40Hz～400Hz) | ±(1.5%+5) |
| General Characteristic | ||
| Power | 1.5V Batteries（R03) × 2 | |
| LCD Size | 31×20mm | |
| Product Color | Red and Grey | |
| Product Net Weight | 280g | |
| Product Size | 272mm×85mm×31 mm | |
| Standard Accessories | Batteries | |
| Standard Individual Packing | Blister, English Manual | |
| Standard Quantity Per Carton | 30PCs | |
| Standard Carton Measurement | 440mm × 295mm × 455mm (0.079 CBM Per Standard Carton) | |
| Standard Carton Gross Weight | 17.5Kg | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT18C Voltage And Continuity Testers”
-
Function Generators
UTG9005C-II Function/Arbitrary Waveform Generato
1. Output waveforms: Sine, square, ramp, pulse, noise, DC, arbitrary
2. Output frequency range: Sine/square, 5MHz3. High-accuracy, broad-band 6 bit frequency counter, range: 100mHz~100MHz4. 4W power output5. EBTN LCD screenSKU: n/a -
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
Related products
-
Multimeters
UT107 Handheld Automotive Multi-Purpose Meters
Main Features
1. Dwell angle measurement (DWELL)
2. Tach measurement (RPM)
3. Data hold
4.12V battery test, duty ratio measurement
5. Measurement input port prompt
6. Low battery, auto polarity and over-range indication
7. Complies with CE (European Union) directives
SKU: n/a
There are no reviews yet.