-8%

UT18D Voltage and Continuity Tester

Availability:

10 in stock


1. Auto power off, the conductor to be measured is greater than 12V

2. Phase rotation test
3. Continuity test with buzzer and LED indication
4. Low battery indication and over voltage prompt
5. Flashlight
6. Test live voltage without batteries
7. Buzzer and silent modes available
8. Auto range
9. Polarity indication

12,000 13,000

10 in stock

Compare
UT18 series are designed for testing AC/DC voltage, 3-phase voltage, phase sequence, continuity, and more. This series is categorized as CAT IV 600V and meets IP65 standard. These voltage testers are perfect tools for electricians to quickly measure voltage levels in all environments. This series should NOT be used with 110V electrical systems.
Weight 0.3 kg
Dimensions 27 × 8 × 3 cm

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT18D Voltage and Continuity Tester”

There are no reviews yet.

  • YH 929D-II SOLDERING IRON

    0 out of 5
    (0)

    Model:929D-II

    Voltage:220V~240V/AC,50Hz

    Maximum power:130W

    Rated power:18W

    Temperature range:90~480°C/194~896°F

    SKU: n/a
  • UT L35 Earth Tester Lead

    0 out of 5
    (0)

    (1) 1.6m test lead (green+ red+ yellow) 1pair

    (2) 5m green test lead 1PCS

    (3) 10m yellow test lead 1PCS

    (4) 20m red test lead 1PCS

    SKU: n/a
  • YX 960 Analog Multimeter

    0 out of 5
    (0)
    • Excellent DC resolution factor of 2mV
    • Expended resistance measurement of 20 to200M
    • Series capacitor DC to enable measurement of only AC components
    • A large and bright meter with a scale length of 80mm
    • The sensitivity of 44pA at full scale
    • Fuse and Diode protection
    • Measure HFE of transistor directly
    SKU: n/a
  • JM 6102 43 in 1 Multi-Functional Screwdriver Hand Tool Set

    0 out of 5
    (0)
    1. Material: CV-R
    2. Product size: 20 x 12.5 x 4.5 cm
    3. Product weight: 785g

    Package Included:

    1. 2 x Ratchet Handles
    2. 9 x Sockets
    3. 30 x Screwdriver Bits
    4. 1 x Extension Rod
    5. 1 x Marble Connector
    SKU: n/a
  • UTP 03 60MHZ PROBE

    0 out of 5
    (0)

    Attenuation ratio: 1× and 10× optional.

    Portable design according to ergonomics.

    Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.

    Safety standards: it has passed the CE Attestation of the European Community.

    Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.

    Measurement in intermediate and low-frequency signals.

    Accessories included by PP series passive voltage rapier.

    Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.

    Contractive-type acuminate hook.

    12cm earth wire with an alligator clip.

    Locating sleeve adapts to IC testing.

    Double-nip wire.

    SKU: n/a
  • UTP 3305C DC POWER SUPPLY

    0 out of 5
    (0)
    Specifications
    Model UTP3305C
    Output voltage 0~30V (CH1/CH2)
    Output current 0~5A (CH1/CH2)
    Output power 315W
    Load regulation Voltage <0.01%+5mV
    Current <0.1%+10mA
    Line regulation Voltage <0.01%+3mV
    Current <0.1%+3mA
    Resolution Voltage 10mV
    Current 1mA
    Accuracy (25℃±5℃) Voltage <0.5%+20mV
    Current <0.5%+10mA
    Ripple (20Hz~20MHz) Voltage ≤2mVrms
    Current ≤3mArms
    Output temperature
    coefficient
    Voltage ≤150ppm
    Current ≤150ppm
    Voltage rise delay ≤100ms (10% rated load)
    Parallel/Series load regulation ≤0.1%+0.1V
    CH3 output features Voltage 5V
    Current 3A
    Voltage accuracy ±50mV
    Load regulation ±50mV
    Interfaces USB Device, RS-232
    General Characteristics
    Power AC 100V/120V/220V/230V±10%, 50Hz/60Hz
    Display 4 windows, LED
    Product net weight 9.1kg
    Product size 260mm x 176mm x 317mm
    Standard accessories USB and RS-232 interface cables, output cables
    Standard individual packing Carton box
    Standard quantity per carton 1pcs
    Standard carton measurement 440mm x 388mm x 295mm
    Standard carton gross weight 10kg
    SKU: n/a