10 in stock
1. Auto power off, the conductor to be measured is greater than 12V
₨12,000 ₨13,000
10 in stock
Compare
| Weight | 0.3 kg |
|---|---|
| Dimensions | 27 × 8 × 3 cm |
| Model | 706 | 872D+ |
| Power Consumption | 720W | 720W |
| Measurement | 124*187*157MM | 124*187*157MM |
| Weight | 4.5KG | 4.8KG |
| Working environment | 0~50°C | 0~50°C/0~122°F |
| Storage environment | -20-80°C | -20-80°C |
| Hot Air Reworks | ||
| Airflow type | dual-turbo blower | diaphragm pump spiral wind |
| Air Flow | ≤168L/min | ≤24L/min |
| Temperature Range | 100°C-480°C | 100°C-480°C |
| Temperature Stability | ±1°C | ±1°C |
| Display Type | Digital Display | Digital Display |
| Handle length | ≥90CM | ≥90CM |
| Soldering Iron | ||
| Temperature Range | 200°C-480°C | 200°C-480°C |
| Temperature Stability | ±2°C | ±2°C |
| Tip of ground voltage | <2mv<> | <2mv<> |
| Tip ground impedance | <2 ohm | <2 ohm |
| Display Type | Digital Display | Digital Display |
| Handle length | ≥100CM | ≥100CM |
| Specifications | LM571LD-I |
| Display type | Green |
| Laser type | 1V1H |
| Expanded Angle | H130°/V150° |
| Laser class | Class 2 |
| Light source | 10mW |
| Laser wavelength | 510nm |
| H/V accuracy | ±2mm/10m |
| Self-leveling range | 3°±1° |
| Self-leveling time | 3s |
| Working distance (Line) | 20m; ＞30m with detector |
| Operating time | ＞12h (All lasers on) |
| Tripod mounting hole | √ |
| Parameters |
|
| Rated voltage | AC220V±10% 50Hz |
| Power of complete machine | 25W |
| Operating environment | 0～40℃ relative humidity＜80％ |
| Storage temperature | －20～80℃ relative humidity＜80％ |
| Dimensions of the machine body | 27*14*22cm |
| Weight | 1.9KG |
| Performance parameters | |
| Output voltage | Adjustable continuously within 0～15V |
| Output current | Adjustable continuously within 0～1A (current limitation adjustment when above 0.2A) |
| Output power | 15W |
| Source effect | ≤1mV |
| Load effect | ≤0.33% |
| Ripple noise | ≤3mVrms（5Hz ~ 1MHz）/≤3mArms |
| Display accuracy | 0.1V/0.1A/1mA |
| Protection mode | Over-current, short circuit, over-temperature protection |
| Dissipation mode | Air cooling |
Features:
Attenuation ratio: 1× and 10× optional.
Portable design according to ergonomics.
Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of the European Community.
Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.
Measurement in intermediate and low-frequency signals.
Accessories included by PP series passive voltage rapier.
Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
Contractive-type acuminate hook.
12cm earth wire with an alligator clip.
Locating sleeve adapts to IC testing.
Double-nip wire.
Product features
JM-8136 40 in 1 Screwdriver Ratchet Hand-tools 
CLAMP METER AC ET 8201 
UT256A 
YH 853D+5A ALL IN ONE REWORK STATION 
There are no reviews yet.