-8%

UT18D Voltage and Continuity Tester

Availability:

10 in stock
Add to Wishlist
Compare

1. Auto power off, the conductor to be measured is greater than 12V

2. Phase rotation test
3. Continuity test with buzzer and LED indication
4. Low battery indication and over voltage prompt
5. Flashlight
6. Test live voltage without batteries
7. Buzzer and silent modes available
8. Auto range
9. Polarity indication

₨12,000 ₨13,000

10 in stock

Compare
UT18 series are designed for testing AC/DC voltage, 3-phase voltage, phase sequence, continuity, and more. This series is categorized as CAT IV 600V and meets IP65 standard. These voltage testers are perfect tools for electricians to quickly measure voltage levels in all environments. This series should NOT be used with 110V electrical systems.
Category:
Weight 0.3 kg
Dimensions 27 × 8 × 3 cm

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT18D Voltage and Continuity Tester”

There are no reviews yet.

  • YH 706 REWORK STATION

    YH 706 REWORK STATION

    0 out of 5
    (0)
    Model 706 872D+
    Power Consumption 720W 720W
    Measurement 124*187*157MM 124*187*157MM
    Weight 4.5KG 4.8KG
    Working environment 0~50°C 0~50°C/0~122°F
    Storage environment -20-80°C -20-80°C
    Hot Air Reworks
    Airflow type dual-turbo blower diaphragm pump spiral wind
    Air Flow ≤168L/min ≤24L/min
    Temperature Range 100°C-480°C 100°C-480°C
    Temperature Stability ±1°C ±1°C
    Display Type Digital Display Digital Display
    Handle length ≥90CM ≥90CM
    Soldering Iron
    Temperature Range 200°C-480°C 200°C-480°C
    Temperature Stability ±2°C ±2°C
    Tip of ground voltage <2mv<> <2mv<>
    Tip ground impedance <2 ohm <2 ohm
    Display Type Digital Display Digital Display
    Handle length ≥100CM ≥100CM
    SKU: n/a
    ₨13,080 ₨16,658
    Read more
    Add to Wishlist
    Compare

  • YH 947-VII Soldering Iron

    YH 947-VII Soldering Iron

    0 out of 5
    (0)

    1.Small size, light weight, easy to carry.

    2.Use the internal heating type heating core, high efficiency.

    3.947VII temperature adjustable.

    4.947VII with a power switch, when the appliance is not in use, you can turn off the

    switch, safe and energy saving.

    5.The internal use SMT double-sided board manufacturing process, the process is neat

    and the solder joint is firm.

    6.The handle uses completely new environmental protection material, safe and durable.

    SKU: n/a
    ₨1,710 ₨2,238
    Read more
    Add to Wishlist
    Compare
  • ,

    JM CT4-1 PLIER

    ,

    JM CT4-1 PLIER

    0 out of 5
    (0)
    • Plastic coated metal handle, precision blades for clean cuts on wires
    • It is suitable for cutting the RJ45 network wire and RJ11 telephone wire.
    • Comes with a wire stripper, it is perfect for you to strip the wire.
    SKU: n/a
    ₨1,500 ₨1,700
    Add to cart
    Add to Wishlist
    Compare

  • LM 571R-I Laser Level Meter

    LM 571R-I Laser Level Meter

    0 out of 5
    (0)
    Specifications LM571R-I
    Display type Red
    Laser type 1V1H
    Expanded Angle H130°/V150°
    Laser class Class 2
    Light source 10mW
    Laser wavelength 635nm
    H/V accuracy ±2mm/10m
    Self-leveling range 3°±1°
    Self-leveling time 3s
    Working distance (Line) 20m; ＞30m with detector
    Operating time ＞12h (All lasers on)
    Tripod mounting hole √
    SKU: n/a
    ₨11,760 ₨14,026
    Add to cart
    Add to Wishlist
    Compare

  • UT61D+ Digital Multimeter

    UT61D+ Digital Multimeter

    0 out of 5
    (0)
    Specifications Range UT61D+
    Safety ratings CAT III 1000V/CAT IV 600V
    AC voltage (V) 1000V ±(1%＋3)
    DC voltage (V) 1000V ±(0.5%＋3)
    AC current (A) 20A ±(1.2%＋5)
    DC current (A) 20A ±(1%＋2)
    Resistance (Ω) 60MΩ ±(1%＋2)
    Capacitance (F) 60mF ±(3%＋5)
    Frequency (Hz) 10MHz ±(0.1%＋4)
    Duty cycle (%) 0.1%~99.9% ±(2%＋5)
    Temperature (℃/℉)  -40℃~1000℃ ±(1%＋3)
     -40℉~1832℉ ±(1%＋6)
    Display count 6000
    Bandwidth (Hz) 40Hz~1kHz
    LoZ ACV √
    Peak Hold √
    Analog bar 31
    General Characteristics
    Power 1.5V battery (R03) x 4
    Product net weight 350g
    Product size 190mm x 90mm x 50mm
    Standard accessories Battery, gold plated test leads, USB cable, temperature probe, English manual
    Standard individual packing Gift box, cloth bag
    Standard quantity per carton 20pcs
    Standard carton measurement 480mm x 370mm x 365mm
    Standard carton gross weight 15.2kg
    Optional accessories Bluetooth/APP
    SKU: n/a
    ₨14,400 ₨16,895
    Add to cart
    Add to Wishlist
    Compare

  • UTP 03 60MHZ PROBE

    UTP 03 60MHZ PROBE

    0 out of 5
    (0)

    Attenuation ratio: 1× and 10× optional.

    Portable design according to ergonomics.

    Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.

    Safety standards: it has passed the CE Attestation of the European Community.

    Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.

    Measurement in intermediate and low-frequency signals.

    Accessories included by PP series passive voltage rapier.

    Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.

    Contractive-type acuminate hook.

    12cm earth wire with an alligator clip.

    Locating sleeve adapts to IC testing.

    Double-nip wire.

    SKU: n/a
    ₨3,401 ₨4,033
    Add to cart
    Add to Wishlist
    Compare

Related products

  • UT681L Cable Tester

    UT681L Cable Tester

    0 out of 5
    (0)

    Main Features

    1. Tests Ethernet cables and telephone lines

    2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing

    3. Ethernet cables: Shielded/Unshielded test

    4. Visible LED indication

    5. Automatically check circuit breakage, short circuit and cross circuit

    6. Can toggle between fast and slow speed test modes

    7. Single key operation

    8. Manual/auto power off (after 10-minute inactivity)

    9. Low battery indication

    10. Power supplied by 9V layer-built battery

    SKU: n/a
    ₨3,465
    Add to cart
    Add to Wishlist
    Compare

  • UTP 03 60MHZ PROBE

    UTP 03 60MHZ PROBE

    0 out of 5
    (0)

    Attenuation ratio: 1× and 10× optional.

    Portable design according to ergonomics.

    Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.

    Safety standards: it has passed the CE Attestation of the European Community.

    Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.

    Measurement in intermediate and low-frequency signals.

    Accessories included by PP series passive voltage rapier.

    Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.

    Contractive-type acuminate hook.

    12cm earth wire with an alligator clip.

    Locating sleeve adapts to IC testing.

    Double-nip wire.

    SKU: n/a
    ₨3,401 ₨4,033
    Add to cart
    Add to Wishlist
    Compare

  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
    ₨0
    Read more
    Add to Wishlist
    Compare

  • UT692G Handheld Optical Power Meter

    UT692G Handheld Optical Power Meter

    0 out of 5
    (0)

    The UT692D/G handheld optical power meters are used to measure absolute optical power or relative loss of optical power through length of fiber optic wires.

    UT692 series are designed to be durable, the meters can withstand 2m drop and have a dust/water resistance rating of IP65. In addition, UT692’s other features include backlight display, flashlight, auto power off, wavelength storage/recall, user calibration, and ultra-wide optical power test range.
    SKU: n/a
    ₨9,600 ₨10,900
    Add to cart
    Add to Wishlist
    Compare
Got Questions ? Call us 24/7! 03324478447
© Mart pakistan.com , best price in pakistan - All Rights Reserved
Got Questions ? Call us 24/7! 03324478447