-8%
Wire & Cable Testers
UT18D Voltage and Continuity Tester
Availability:
10 in stock
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test
3. Continuity test with buzzer and LED indication
4. Low battery indication and over voltage prompt
5. Flashlight
6. Test live voltage without batteries
7. Buzzer and silent modes available
8. Auto range
9. Polarity indication
₨12,000 ₨13,000
10 in stock
CompareUT18 series are designed for testing AC/DC voltage, 3-phase voltage, phase sequence, continuity, and more. This series is categorized as CAT IV 600V and meets IP65 standard. These voltage testers are perfect tools for electricians to quickly measure voltage levels in all environments. This series should NOT be used with 110V electrical systems.
| Weight | 0.3 kg |
|---|---|
| Dimensions | 27 × 8 × 3 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT18D Voltage and Continuity Tester”
-
Laser Distance Meters
LM 120PRO Laser Distance Meter
Specifications LM120PRO Display type EBTN Display size 2.4-inches Range 120m Min. display unit 0.001m Measurement units m/ft/in/ft+in Measurement basis Front/middle/rear Accuracy ±2mm Laser class 2 Laser type 630~670nm, ﹤1mW Features Single measurement √ Continuous measurement √ Max/Min/Area √ Volume/Pythagoras √ Add/Subtract/Triangle area √ Auto leveling horizontal/vertical √ Electronic leveler √ Data storage 20 groups Auto laser off 30s without operation Auto power off √ Auto backlight off √ Battery status display √ USB charging √ Tripod mounting hole √ General Characteristics Power 1.2V AAA recharge battery x 3 Product color Red and grey Product net weight 170g Product size 59mm x 28mm x 137mm Standard accessories Carrying bag, USB interface cab Standard individual packing Gift box, English manual Standard quantity per carton 20pcs Standard carton measurement 390mm x 255mm x 345mm Standard carton gross weight 8.3kg SKU: n/a -
DC Power Supplies
UTP1305 DC Power Supply
Specifications Model UTP1305 Output voltage 0~32V Output current 0~5A Load regulation CV≤1×10-4 +3mV, CC≤2×10-4 +3mA Ripple and noise ≤1mVrms Output regulation resolution CV: 100mV (typical), CC: 10mA (typical) Reliability MTBF(e): ≥2000hrs Display mode LED voltage and current dual display Feature Auto conversion of constant voltage and current with current limit protection General Characteristics Power Input voltage: 115V AC/230V AC;
frequency: 47Hz~63HzProduct color White and grey Product net weight 5kg Product size 145mm x 175mm x 284mm Standard accessories Power cord, output cables Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 430mm x 400mm x 255mm Standard carton gross weight 13kg SKU: n/a -
Oscilloscopes
UTD1202C Handheld Digital Storage Oscilloscope
Specifications Model UTD1202C Bandwidth 200MHz Channels 2 Sampling rate 1GS/s Rise time ≤1.8ns Memory depth 7.5kpts Vertical sensitivity 5mV/div~50V/div Time base scale 2ns/div-50s/div Storage modes Setup, waveform, bitmap Trigger modes Edge, pulse width, video and alternative Interfaces USB host, USB OTG (UTD1202C Optional) Multimeter Specifications Range Accuracy DC voltage (V) 600mV/6V/60V/600V/1000V ±(1%+5) AC voltage (V)(45Hz~400Hz) 600mV/6V/60V/600V/700V ±(1.2%+5), Frequency: ＜200Hz ±(1.5%+5), Frequency: ≥200Hz DC current (A) 6mA/60mA/600mA ±(1.2%+5) 6A ±(1.5%+5) AC current (A)(45Hz~400Hz) 6mA/60mA/600mA ±(2%+5) 6A ±(2.5%+5) Resistance (Ω) 6kΩ/60kΩ/600kΩ ±(1.2%+5) 600Ω/6MΩ/60MΩ ±(1.5%+5) Capacitance (F) 6nF/6mF ±(5%+10) 60nF/600nF/6μF/60μF/600μF ±(4%+5) Display count 6000 Auto range √ General Characteristics Power Li-ion battery: 7.4V 4400mAh; DC adapter: 100~240V 50/60Hz input, 9V/4A output Display 5.7 inches TFT LCD, QVGA (320×240) Product net weight Red and grey Product color 1.8kg Product size 268mm x 168 mm x 60mm Standard accessories Probe x2 (1x, 10x switchable), current voltage converter, power cord, adapter, test leads Standard individual packing Carton box, carrying bag Standard quantity per carton 4pcs Standard carton measurement 500mm x 400mm x 320mm Standard carton gross weight 16.7kg SKU: n/a -
Multimeters
UT 39E+ Modern Digital Multimeter
Specifications Range UT39E+ Category ratings CAT II 1000V, CAT III 600V DC voltage (V) 200mV/2V/20V/200V/1000V ±(0.05%+3) AC voltage (V) 200mV/2V/20V/200V/1000V ±(0.5%+10) DC current (A) 2000uA/20mA/200mA/2A/20A ±(0.5%+5) AC current (A) 2000uA/20mA/200mA/2A/20A ±(0.8%+10) Resistance (Ω) 200Ω/2kΩ/20kΩ/2MΩ/20MΩ/200MΩ ±(0.3%+2) Capacitance (F) 2000uF ±(4%+20) Frequency (Hz) 10Hz~2MHz ±(0.1%+3) Temperature -40℃~1000℃ ±(1%+5) -40℉~1832℉ ±(1.5%+5) Conductance (nS) 0.1~100nS ±(1%+3) Display count 20000 NCV √ General Characteristics Power 1.5V battery (R03) x 2 Display 56.5mm x 36mm Product net weight 330g Product size 175mm x 83mm x 53mm Standard accessories Test leads, temperature probe, English manual . SKU: n/a -
Laser Level Meter
LM 571LD-I Laser Level Meter
Specifications LM571LD-I Display type Green Laser type 1V1H Expanded Angle H130°/V150° Laser class Class 2 Light source 10mW Laser wavelength 510nm H/V accuracy ±2mm/10m Self-leveling range 3°±1° Self-leveling time 3s Working distance (Line) 20m; ＞30m with detector Operating time ＞12h (All lasers on) Tripod mounting hole √ SKU: n/a -
Rework & Soldering Station
YH 898BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W 300℃ Constant Temperature Power (High-Speed PID Programmed to
Energy Savings)
250W±10％ Operating Environment 0～40℃ Relative humidity＜80％ Storage temperature －20～80℃ Relative humidity＜80％ Dimensions 13.5*15*10cm weight 2.65KG SKU: n/a
Related products
-
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a -
Wire & Cable Testers
UT681C Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a -
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
-
Wire & Cable Testers
UTP 04 100MHZ PROBE
Features Of UNI-T Best Passive Probe 100MHz UTP04:
This passive probe is good oscilloscope accessories, it is suitable for oscilloscope.
Stable performance and not easy to break.
This can provide a professional and accurate measurement.
Widely used, it can satisfy most peoples.
A good helper for instrument engineer.
SKU: n/a
There are no reviews yet.