-5%

UT195E Professional Digital Multimeters


Features

1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V

2. Large 6000-count LCD screen

3. True RMS

4. ACV 750V 5kHz bandwidth

5. Flashlight

6. Auto LCD backlight controlled by light sensor (can be turned off)

7. LoZ voltage test, for ghost voltage measurement

8. 20A current measurement (max 30 seconds)

9. 31 analogue bar

27,500 29,025

Compare

Features

1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V

2. Large 6000-count LCD screen

3. True RMS

4. ACV 750V 5kHz bandwidth

5. Flashlight

6. Auto LCD backlight controlled by light sensor (can be turned off)

7. LoZ voltage test, for ghost voltage measurement

8. 20A current measurement (max 30 seconds)

9. 31 analogue bar

Category:
Weight 0.5 kg
Dimensions 21 × 10 × 6 cm
Specifications Range Best Accuracy
Model UT195E
DC voltage 600mV ~ 1000V ±(0.5%+3)
AC voltage 600mV ~ 750V ±(0.7%+3)
LoZ ACV 600.0V ±(2.0%+3)
DC current (A) 600.0μA ~ 20A ±(0.8%+3)
AC current (A) 600.0μA ~ 20A ±(1.0%+3)
Resistance (Ω) 600.0Ω ~ 60.00MΩ ±(0.8%+2)
Capacitance 6.000nF ~ 60.00mF ±(3%+5)
Frequency 60.00Hz ~ 10.00MHz ±(0.1%+4)
Duty ratio 0.1% ~ 99.9% ±(2.0%+5)
Features
Display count 6000
Display interface (HTN) Single display
Measurement of digital conversion rate times/s 3
Measurement of analogue bar conversion rate times/s 10
Analogue bar 31 section
True RMS
AC voltage frequency response 45 ~ 400Hz
AC current frequency response 45 ~ 400Hz
Low pass filter test √ (1kHz 3dB attenuation)
Diode/Continuity test 3.5V
Auto/Manual range
Auto power off
Continuity buzzer
Low battery indication
Data hold
MAX/MIN
Functional selection
Electrical torch
Auto backlight
Working temperature 0 °C ~40 °C
2m drop proof
Protection grade IP65
General Characteristics
Power supply 9V 6F22 carbon-zinc or 6LR61 alkaline battery
LCD size 66mm × 51mm
Device color Red and grey
Device weight 473g
Device size 195mm × 95mm × 58mm
Standard accessories Testing probes, battery, carrying bag
Standard individual packing Gift box, user manual

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT195E Professional Digital Multimeters”

There are no reviews yet.

  • UT387A Wall Scanner

    0 out of 5
    (0)
    SKU: n/a
  • ,

    JM-8150 52 In 1 Model And Electronics Screwdriver

    0 out of 5
    (0)

    Accessories:

    1PCS 130mm Various angle veer

    1PCS 120mm handle

    1PCS parts box

    1PCS 100mm extension bar

    SKU: n/a
  • UT-L30 Test Leads

    0 out of 5
    (0)
    SKU: n/a
  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
  • MECHANIC Electric glue remover IR10 Pro

    0 out of 5
    (0)

    MECHANIC Electric glue remover IR10 Pro

     

    SKU: n/a