UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.
UT262A Non-Contact Phase Detector
10 in stock
UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.
₨21,600 ₨22,600
10 in stock
CompareWeight | 0.2 kg |
---|---|
Dimensions | 7 × 7 × 3 cm |
General Functions | Range | Accuracy |
Type | UT262A | |
Phase Sequence | 【Positive Phase】indicated by four phasedetecting lights turn on clockwise and non-continuous beeping sound. | √ |
【Negative phase】indicated by four phase detecting lights turn on anti-clockwise and continuous beeping sound | √ | |
Missing Phase Detection | R-S or S-T light Off | √ |
Live Power Detection | R-S or S-T light On | √ |
Circuit Break Detection | R-S or S-T light Off | √ |
Voltage Detection | R-S or S-T light On | √ |
AC Voltage Range (V) | 70V~600V | √ |
Frequency Range (Hz) | 40Hz~70Hz | √ |
Features | ||
Clamp Open | Φ1.6~Φ16mm | |
Display Mode | LED | |
Power On Indication | √ | |
Buzzer Indication | √ | |
Auto Power Off | Automatically switch off after three minutes | √ |
General Characteristics | ||
Power | 1.5V battery (5#)X 2 | |
Product Color | Red and Grey | |
Product Weight | 180g | |
Product Size | 70mm X 75mm X 30mm | |
Standard Accessories | Batteries | |
Standard Individual Packing | Blister, User manual |
Based on 0 reviews
Be the first to review “UT262A Non-Contact Phase Detector”
-
Clamp Meters
CLAMP METER AC DC CM 2056
Technical data
Basic function
Range
Accuracy
DCV
400mV/4V/40V/400V/1000V
±(0.5%+5)
ACV
400mV/4V/40V/400V/750V
±(1.0%+5)
DCA
400A/1000A
±(2.0%+5)
ACA
400A/1000A
±(2.0%+5)
Resistance
400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ
±(0.8%+3)
Capacitance
4nF/40nF/400nF/4uF/40uF/200uF
±(3.5%+8)
Frequency
100Hz/1kHz/10kHz/100kHz/1MHz/10MHz
±(0.5%+4)
Temperature
(-40~ 1000) ℃ / (-40 ~1832) ℉
±(1.0%+5)
Special function
CM-2056
NCV test
√
True RMS test
√
Diode test
√
Continuity test
Less than 50Ω±10Ω
Low battery indicator
Approx. less than 2.4 V
Data hold
√
Auto power off
About 15 minutes
Function protection
√
Clamp light
√
Backlight display
√
Input impedance
10MΩ
Sampling rate
3 times/s
AC frequency response
Current 50-60Hz/ voltage 50-400Hz
Operation method
Auto or manual range
Max display
4000
Clamp opens
52mm
Battery
3V (2*AAA battery)
General Characteristic
Meter color
Orange and Black
Meter weight
About 280g (including battery)
Meter size
270×123×50mm
Standard accessory
Test leads, battery, manual, TP01 temperature probe
SKU: n/a
There are no reviews yet.