-
×
ANALOG METER YX 960 TR
- Vendor:
superworld
Subtotal: ₨1,112
Power Quality Analyzer
UT283A Single Phase Power Quality Analyzer
Availability:
Out of stock
1. Trend/event capture
2. Harmonics/inrush current measurement
3. File management through USB interface
4. Flick measure (PST/PLT values)
5. User friendly interface
6. Multimeter functions
7. Scope functions including waveform display
8. 3.5 inches 64K color TFT LCD display
9. THD (Total Harmonic Distortion) function
10.Long-term monitoring
₨0
Out of stock
CompareUT283A is a handheld multi-functional device designed to measure and analyze single-phase power systems.This portable S class device can measure amplitude, phase, harmonics, current, voltage, and record results in SD card for further analysis and export.
Applications:
This product is suitable for professional working in electrical power, medical, transportation, telecommunication, and other industrial areas.
| Weight | 0.8 kg |
|---|---|
| Dimensions | 20 × 12 × 5 cm |
| Specifications | Range | UT283A |
| Voltage (V) | 10V~1000V AC/DC | ±0.5%Udin |
| AC current (A) | 10A/100A/1000A | ±0.5%f.s. |
| Frequency (Hz) | 40~70Hz | ±50mHz |
| Power (W) | >15%S | ±1%S |
| Power factor | 0~1 | ±0.02 |
| Energy (Wh) | 0~9999MWh | ±1.5%rdg |
| Crest factor | 1 to 10 | ±5% |
| Voltage harmonics or inter-harmonics | Um≥3%Unom (1~51th, step 0.5th) | ±5%Urms |
| Um＜3%Unom (1~51th, step 0.5th) | ±0.15%Unom | |
| Current harmonics or inter-harmonics | Im≥10%Inom (1~51th, step 0.5th) | ±5%Irms |
| Im＜10%Inom (1~51th, step 0.5th) | ±0.5%Inom | |
| Power harmonics | (1~51th, step 1th) | Calculated based on voltage and current amplitude and phase accuracy |
| Transients | ±6000V Peak, Fsample=2MHz | ±5%rdg.±5%f.s |
| Dip/swell/interrupt | 0~1000V AC | Udin±1 % |
| AC inrush current (A) | 10A/100A/1000A | ±1%f.s |
| Resistance (Ω) | 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ | ±(1%+3) |
| Capacitance (F) | 60nF/600nF/6μF/60μF/600μF | ±(4%+20) |
| Features | ||
| True RMS | √ | |
| Harmonic analysis | Up to 51th | √ |
| Flick measure | 10 minutes, PST and PLT values | √ |
| Voltage ratio | √ | |
| Current ratio | √ | |
| Event capture | √ | |
| Trend capture | √ | |
| Data logging | 8GB | √ |
| USB interface | √ | |
| Backlight adjustment | √ | |
| Low battery indication | √ | |
| Input protection | √ | |
| General Characterisitics | ||
| Power | Li-ion battery: 7.4V 3600mAh | |
| Display | 70mm x 52mm; 3.5 inches 64K color TFT LCD (320 x 240) | |
| Product color | Red and grey | |
| Product net weight | 808.4g | |
| Product size | 199mm x 118mm x 49mm | |
| Standard accessories | Power adaptor, power cord, test leads, test probes, alligator clips, current clamp (10A/100A/1000A), USB interface cable, PC software CD, SD card (8GB) | |
| Standard individual packing | Gift box, carrying bag, English manual | |
| Standard quantity per carton | 4pcs | |
| Standard carton measurement | 665mm x 350mm x 305mm | |
| Standard carton gross weight | 24.2kg | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT283A Single Phase Power Quality Analyzer”
-
Clamp Meters
UT221 2000A ACA DCA Digital Clamp Meters
UT221 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a -
Clamp Meters
CLAMP METER AC DC CM 2056
Technical data
Basic function
Range
Accuracy
DCV
400mV/4V/40V/400V/1000V
±(0.5%+5)
ACV
400mV/4V/40V/400V/750V
±(1.0%+5)
DCA
400A/1000A
±(2.0%+5)
ACA
400A/1000A
±(2.0%+5)
Resistance
400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ
±(0.8%+3)
Capacitance
4nF/40nF/400nF/4uF/40uF/200uF
±(3.5%+8)
Frequency
100Hz/1kHz/10kHz/100kHz/1MHz/10MHz
±(0.5%+4)
Temperature
(-40~ 1000) ℃ / (-40 ~1832) ℉
±(1.0%+5)
Special function
CM-2056
NCV test
√
True RMS test
√
Diode test
√
Continuity test
Less than 50Ω±10Ω
Low battery indicator
Approx. less than 2.4 V
Data hold
√
Auto power off
About 15 minutes
Function protection
√
Clamp light
√
Backlight display
√
Input impedance
10MΩ
Sampling rate
3 times/s
AC frequency response
Current 50-60Hz/ voltage 50-400Hz
Operation method
Auto or manual range
Max display
4000
Clamp opens
52mm
Battery
3V (2*AAA battery)
General Characteristic
Meter color
Orange and Black
Meter weight
About 280g (including battery)
Meter size
270×123×50mm
Standard accessory
Test leads, battery, manual, TP01 temperature probe
SKU: n/a -
Earth Ground Resistance Testers
UT521 Earth Groud Testers
UT520 series earth resistance tester hasthe functions of backlight display, low battery display, data hold, datastorage, auto power off and power saving. It can not only be used for accurate three-wiremeasurement but also simple two-wire measurement.
It is applicable to measuring the earthresistance of all kinds of electrical power system, electrical equipment and anti-thunderequipment. It can also measure the earth voltage. It is applicable to testingoperating earth systems of smelting, communication, manufacture, fossil oil,national defense, electricity, chemical industry and construction.
SKU: n/a
Related products
-
Power Quality Analyzer
PQM-707 Power Quality Analyzer
-
Features:
- 7″ touch screen – intuitive operating
- CAT IV 600V – high safety
- all parameters acc. to class S – high accuracy of measurements
- Li-Ion rechargeable battery – higher mobility
- removable memory card – recording data with no restrictions
Possible measurements:
- Measurements according to EN 50160,
- Voltage L1, L2, L3, N-PE (five inputs),
– average, minimum, maximum values, range to 760 V, ability to work with voltage transformers, - Current L1, L2, L3, N (four inputs),
– average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers, - Crest factor for voltage and current,
- Frequency from 40 Hz to 70 Hz ,
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
- Power recording:
- Budeanu method,
- IEEE 1459,
- Active, reactive, apparent energy,
- Power factor, cosφ, tgφ,
- Up to 50th harmonics for voltage and current,
- Total Harmonic Distortion (THD) for voltage and current,
- Short-term (PST) and long-term (PLT) flicker,
- Unbalance of voltage and current,
- Current and voltage events registration including waveforms and RMS graphs half period,
- Inrush current
- Calculator of energy tariffs
- ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
SKU: n/a -
-
Power Quality Analyzer
UT285C Three Phase Power Quality Analyzer
1. Waveform real-time display (4 channels voltage/4 channels current).
2. True RMS values of voltages and currents3. Peak current and voltage values4. Total harmonic distortion (THD)5. Active, reactive, apparent power, by phase and cumulative6. Transformer K factor7. Power factors (PF) and displacement factors (DPF or COSΦ)8. Short-term voltage flicker (PST)9. Three phase unbalance(current and voltage)10. USB interface/PC softwareSKU: n/a
There are no reviews yet.