UT315A Vibration Tester
UT310 series handheld vibration testers can measure displacement, velocity, and acceleration of rotating and reciprocating machinery. Technicians can use these to monitor equipment status and ensure normal operation
UT310 series handheld vibration testers can measure displacement, velocity, and acceleration of rotating and reciprocating machinery. Technicians can use these to monitor equipment status and ensure normal operation.
₨87,000 ₨87,200
Analog bandwidth | 150MHz | 250MHz | ||
Channels | 2+16 digital | 4+16 digital | 2+16 digital | 4+ 16digital |
Sampling rate (Analog) | 2.5GS/s (Single channel), 1.25GS/s (Dual channels) | |||
Sampling rate (Digital) | 1.25GS/s (Eight channels), 625MS/s(Sixteen channels) | |||
Memory depth | 70Mpts | |||
Waveform capture rate | 200,000wfms/s | |||
Time base scale | 2ns/div~50s/div (Real-time sampling rate, memory depth display ) | |||
Time base scale (digital) | 2ns/div~40S/div[Step by 1-2-4 stall] | |||
Input impedance | (1MΩ±1%) II (20pF±3pF) | |||
Input impedance digital | (101kΩ±1%) II (9pF±1pF) | |||
Vertical scale | 1mV/div~20 V/div (1 MΩ) | |||
DC gain accuracy | <5mV: ±3%, ≥5mV: ±2% | |||
Waveform record | 100,000 frames | |||
Trigger types | Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay |
|||
Bus decode | RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay | |||
Waveform operations | A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations | |||
Auto measurements |
Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width, -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A |
|||
Measurement display | 5 types | |||
Measurement statistics | Average, Max, Min, standard deviation and number of measurements | |||
Frequency counter | 6 bits | |||
Standard interfaces | USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA | |||
Standard Accessories |
USB interface cable | UT-D14 | ||
Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) | UT-P06 | |||
Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) | UT-P05 | |||
16CH Logic analyzer probe | UT-15M |
Specifications | UT622A | UT622C | UT622E |
Certificates | CE, RoHS | ||
Test frequency | 100Hz, 120Hz, 1kHz, 10kHz | 100Hz, 120Hz, 1kHz, 10kHz, 100kHz | 100Hz, 120Hz, 1kHz, 10kHz, 100kHz |
Test signal level | 0.1Vrms, 0.3Vrms, 1Vrms | ||
Output impedance | 100Ω | ||
Measurement parameters | Primary: L/C/R/Z Secondary: D/Q/θ/ESR |
Primary: L/C/R/Z/DCR Secondary: D/Q/θ/ESR | |
Auto LCR | √ | ||
Test terminals | Three-terminal test jacks, five-terminal test sockets | ||
Test rate | Fast (20 times/s), medium (5 times/s), or slow (2 times/s) | ||
DCR test rate | — | — | Fast (20 times/s), medium (5 times/s), or slow (2 times/s) |
Ranging mode | Auto/hold | ||
Tolerance range | 1%~20% | ||
Testing circuit mode | Series/parallel mode | ||
Clearing correction | Open/short circuit | ||
Fuse of test ports | 0.1A/250V | ||
Communication interface | Mini-USB | ||
LED alarm for tolerance (pass: green; fail: red) |
√ | √ | √ |
Display range | |||
Maximum reading | 99999 | ||
Minimum resolution | 0.0001 | ||
Maximum accuracy | 0.001 | ||
L | 0.00μH~99.999H | ||
C | 0.00pF~99.999mF | ||
Z/R | 0.0000Ω~9.9999MΩ | ||
ESR | 0.0000Ω~999.99Ω | ||
D | 0.0000~9.9999 | ||
Q | 0.0000~99999 | ||
θ | -179.9°~179.9° | ||
DCR | — | — | 0.01mΩ–20.000MΩ |
Temperature coefficient | 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) | ||
General Characteristics | |||
Power | 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A | ||
Display | 2.8′ TFT LCD 320X240 | ||
Product net weight | 420g | ||
Product size | 93mm x 192mm x 44mm | ||
Standard accessories | Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual |
UT61 Series Digital Multimeters are products designed for multi-functional, high precision, high performance and automatic measurements.
There are no reviews yet.