UT360 series anemograph is a professional anemograph used to measure wind temperature, wind speed and wind capacity, which is of stable performance, reliable and of neoteric appearance. The device can be widely used in the fields such as environmental protection, labor hygiene, industrial enterprise, scientific research. It is applied to environmental noise measurement, machinery equipment noise and architectural acoustics measurement.
UT361 Anemoscopes
10 in stock
UT360 series anemograph is a professional anemograph used to measure wind temperature, wind speed and wind capacity, which is of stable performance, reliable and of neoteric appearance. The device can be widely used in the fields such as environmental protection, labor hygiene, industrial enterprise, scientific research. It is applied to environmental noise measurement, machinery equipment noise and architectural acoustics measurement.
₨34,800 ₨38,150
10 in stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 16 × 8 × 3 cm |
Specifications | Range | Best Accuracy |
Model | UT361 | |
Wind Speed Measurement | 2m/s~10m/s | ±(3%+5) |
10m/s~30m/s | ±(3%+8) | |
Wind Count Measurement (CMM) | 0.001~9999 X 100 | √ |
Wind Count Measurement (CFM) | 0.001~9999 X 100 | √ |
Temperature Measurement | 0°C~40°C(32°F~104°F) | ±3°C(±4°F) |
Features | ||
Display Count | 9999 | |
Data Hold | √ | |
Auto Power Off | Around 10 Minutes | √ |
Low Battery Indication | ≤7.2V | √ |
MAX Mode | √ | |
MIN Mode | √ | |
Data Logging | 2044 | |
Auto Record Time Setup | √ | |
Units Switch | √ | |
LCD Backlight | √ | |
Wind Speed Display | Display “ VEL” | √ |
Wind Count Display | Display “ FLOW” | √ |
General Characteristic | ||
Power | 9V Alkaline Battery (6LF22) | |
LCD Size | 57mm X 37mm | |
Product Color | Red and Grey | |
Product Net Weight | 375g | |
Product Size | 162mm X 78mm X 30mm | |
Standard Accessories | Battery, Carrying Bag | |
Standard Individual Packing | Gift Box, English Manual | |
Standard Quantity Per Carton | 40pcs | |
Standard Carton Measurement | 530mm X 420mm X 365mm (0.081 CBM Per Standard Carton) | |
Standard Carton Gross Weight | 21kg |
Based on 0 reviews
Be the first to review “UT361 Anemoscopes”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Usb Tester
UT658LOAD USB Testers
Features of UT658 Series USB Testers
Certifications: CE, UKCA
● Type-A/C interface
● CE certification
● 10 sets of data storage
● Loop equivalent resistance measurement (1-480Ω)
● Same screen shows voltage, current, power, capacity, etc.
● Support fast charge protocol
SKU: n/a
There are no reviews yet.